1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Dec 15, 2023 at 5:01 PM
    kojak

    kojak New Member

    Joined:
    Sep 19, 2023
    Member:
    #35749
    Messages:
    277
    Gender:
    Male
    Vehicle:
    21 SR5P 4x4
    I'll swing by and see what they say. Lots of anecdotes online of this issue popping up at a post-lift alignment--none that say the shop damaged anything. Meanwhile it's super annoying to drive.

    In other news, the Gobi rack FINALLY showed up, and I managed to slap it on myself before it got too dark.

    PXL_20231216_003756668~2.jpg
     
  2. Dec 15, 2023 at 5:23 PM
    raimieb

    raimieb Hobby Mechanic - Love Our 4Runner!

    Joined:
    May 16, 2022
    Member:
    #27095
    Messages:
    806
    Gender:
    Male
    First Name:
    raimie
    Vehicle:
    2021 ORP 4x4
    Lots…
    Grata job! They’re heavy!!! I installed the steel ones and was thinking these are bomb proof. Did you go with the rear differential skid? I’m thinking about it but I don’t drive off-road too much.
     
    HazOpRed[QUOTED] likes this.
  3. Dec 15, 2023 at 5:38 PM
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,430
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Nice! Glamor shot requires getting on a boulder for the undercarriage flex shot. No lift needed.:D
     
    Harringbr99 and HazOpRed[QUOTED] like this.
  4. Dec 15, 2023 at 5:47 PM
    dgrenier15

    dgrenier15 New Member

    Joined:
    Feb 27, 2023
    Member:
    #31489
    Messages:
    287
    Gender:
    Male
    First Name:
    Dayne
    Oklahoma
    Vehicle:
    2022 AG TRD ORP
    I'm sorry did you ask a question I was too busy drooling over your GX!
     
  5. Dec 15, 2023 at 5:56 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    'MERICA!

    IMG_20231215_175356073_HDR.jpg
    Screenshot_20231215-175419.png
     
    captrussia253, playdixie and kojak like this.
  6. Dec 15, 2023 at 5:59 PM
    HazOpRed

    HazOpRed 22' TRDOR

    Joined:
    Dec 28, 2022
    Member:
    #30288
    Messages:
    294
    Gender:
    Male
    Did not get their rear diff skid. Not really necessary imo. Yes, it is the lowest point, but I would just take a different line lol. I am sure it can take some punishment anyway. Didn't get the gas tank skid either. Didn't want even more weight on that side, and C4's doesn't even hardly have drainage holes for some reason.
     
  7. Dec 15, 2023 at 6:22 PM
    raimieb

    raimieb Hobby Mechanic - Love Our 4Runner!

    Joined:
    May 16, 2022
    Member:
    #27095
    Messages:
    806
    Gender:
    Male
    First Name:
    raimie
    Vehicle:
    2021 ORP 4x4
    Lots…
    Yeah. Makes sense. I think I’m leaving them off too.
     
  8. Dec 15, 2023 at 10:18 PM
    Yamahamer

    Yamahamer New Member

    Joined:
    Feb 10, 2023
    Member:
    #31183
    Messages:
    203
    Gender:
    Male
    Nevada
    Vehicle:
    2022 4Runner Off Road
     
  9. Dec 15, 2023 at 10:28 PM
    KYFHO

    KYFHO Generic Scumbag

    Joined:
    Feb 9, 2022
    Member:
    #25587
    Messages:
    124
    UT
    2017 SR5P with some stuff
    I am 2” lifted in the rear and went with the shorty.
     
    kojak[QUOTED] likes this.
  10. Dec 16, 2023 at 1:38 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Wow that looks like killer protection coverage
     
    HazOpRed[QUOTED] likes this.
  11. Dec 16, 2023 at 1:39 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    This ↑

    Bump
     
    captrussia253[QUOTED] likes this.
  12. Dec 16, 2023 at 6:16 AM
    semprenissart

    semprenissart Mèfi

    Joined:
    Dec 22, 2021
    Member:
    #24758
    Messages:
    867
    Arizona
    Vehicle:
    2022 4Runner TRD Pro (MGM)
    Westcott Sliders. Gobi no rise
    that doesnt look too bad. Thankfully you didnt loose control and crashed. You could get the insurance to give you cash instead of fixing it and shop for you own aftermarket bumper
    Upload the footage for us to see!
     
  13. Dec 16, 2023 at 6:56 AM
    captrussia253

    captrussia253 New Member

    Joined:
    Jul 5, 2020
    Member:
    #15320
    Messages:
    587
    Gender:
    Male
    First Name:
    Ruslan
    PNW
    Vehicle:
    2017 Tundra Platinum 2016 T4R SR5P
    Haha thanks. It was an awesome rig. 3” lift and 35s. Sold it to a buddy and got a Tundra. I do miss it though.

    IMG_7137.jpg
     
  14. Dec 16, 2023 at 8:08 AM
    dgrenier15

    dgrenier15 New Member

    Joined:
    Feb 27, 2023
    Member:
    #31489
    Messages:
    287
    Gender:
    Male
    First Name:
    Dayne
    Oklahoma
    Vehicle:
    2022 AG TRD ORP
    My wife got the 4Runner and I am in a 2014 Chevy Silverado. I want a 90s Land Crusier or your model GX once my truck is toast. But I will have to figure out how to function without an arm and leg to pay for one haha
     
    captrussia253[QUOTED] likes this.
  15. Dec 16, 2023 at 9:13 AM
    ColeRunner

    ColeRunner New Member

    Joined:
    Jul 17, 2023
    Member:
    #33985
    Messages:
    29
    Gender:
    Male
    Vehicle:
    2023 MGM sr5 Premium 4x4
    This mod can get you easily an extra 10hp!

    IMG_4546.jpg
    IMG_4552.jpg
    IMG_4558.jpg
    72412973155__D68FFFCC-E8CB-4A1B-ADA8-0E48E3F03E12.jpg
     
  16. Dec 16, 2023 at 11:50 AM
    captrussia253

    captrussia253 New Member

    Joined:
    Jul 5, 2020
    Member:
    #15320
    Messages:
    587
    Gender:
    Male
    First Name:
    Ruslan
    PNW
    Vehicle:
    2017 Tundra Platinum 2016 T4R SR5P
    Give it a few years until the new gx comes down in price. They fixed the ugly front grill.
     
  17. Dec 16, 2023 at 1:20 PM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,028
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    Got Raptor lights in, wired to tail lights & Brite box Anytime Fog lights. There's a "Cap" on the boot at firewall that Main harness & Hood release run through. I looked on the inside & saw that it was a tube, so I cut the "Cap" off & ran the single pwr wire for Raptor lights through, Then eventually I had the 3 pins from Pwr supply harness to get through there. I ran 0.041 safety wire from cabin to eng compartment, electric taped 3 pins into a tapered "bullet" re bent safety wire back & pulled it through!! When I tried it No lights, The fuse holder had receptacles off center. I spiral wrapped wires for both lights & Pwr supply for Brite Box, Tywrapped to Batt hold bracket. The other feature vs the "Antman" Mod I did to my 2018 is the OEM Fog Light switch on Turn Signal still works & If you use that the indicator on the cluster display shows those lights are on, W/Brite Box it does Not show they are on.

    Raptor & Anytime Fog Lights.jpg
     
    Last edited: Dec 17, 2023
  18. Dec 16, 2023 at 2:38 PM
    ID_Yeti

    ID_Yeti New Member

    Joined:
    Nov 29, 2023
    Member:
    #36976
    Messages:
    154
    Gender:
    Male
    Vehicle:
    2024 ORP
    New shoes. 275/70r17 wildpeak A/T. Bone stock, can get them to rub in reverse. So next up some massaging.17027660444935981198714572147914.jpg
     
    djwantke, raimieb, Dabigono and 6 others like this.
  19. Dec 16, 2023 at 2:48 PM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,028
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    Eibachs Set @ 0.85 Worked on my 2018 TRD OR perfect, except towing Boat, Frt would float on Hiway Wicked bad when 18 wheeler's would pass talk about Xwinds!!
     
  20. Dec 16, 2023 at 2:53 PM
    4 Sticks

    4 Sticks •I Am The Sea•

    Joined:
    Sep 24, 2019
    Member:
    #11409
    Messages:
    2,287
    Gender:
    Male
    First Name:
    J!mi
    Florida
    Vehicle:
    ‘24•TRD-ORP
    :thumbsup:
    A shot from the side please at your convenience.
     
    djwantke and das goot like this.
  21. Dec 16, 2023 at 3:04 PM
    dgrenier15

    dgrenier15 New Member

    Joined:
    Feb 27, 2023
    Member:
    #31489
    Messages:
    287
    Gender:
    Male
    First Name:
    Dayne
    Oklahoma
    Vehicle:
    2022 AG TRD ORP
    Just a bath today! Much needed!

    IMG_8541.jpg

    IMG_8539.jpg

    IMG_8544.jpg
     
  22. Dec 16, 2023 at 7:41 PM
    raimieb

    raimieb Hobby Mechanic - Love Our 4Runner!

    Joined:
    May 16, 2022
    Member:
    #27095
    Messages:
    806
    Gender:
    Male
    First Name:
    raimie
    Vehicle:
    2021 ORP 4x4
    Lots…
    great dog! We have blue Merle Dane too!
     
    Last edited: Dec 17, 2023
    dgrenier15[QUOTED] likes this.
  23. Dec 16, 2023 at 8:07 PM
    laxman09

    laxman09 Gassy Member

    Joined:
    Dec 7, 2023
    Member:
    #37129
    Messages:
    423
    Gender:
    Male
    Mahoning Valley, OHIO
    Brought home a 2020 SR5P! First ever Toyota!

    PXL_20231216_183708799.jpg
     
  24. Dec 17, 2023 at 5:29 AM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,644
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    congrats! Let the games begin!!
     
    djwantke and raimieb like this.
  25. Dec 17, 2023 at 2:37 PM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,028
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    Ordered these: supposed to be here 22-Dec-23
    Fyre Flys White LED Interior Lights for 2010-2023 Toyota 4Runner 16 Piece 6000K Super Bright 3014 Series SMD Map Dome Door Vanity Mirror Cargo Puddle License plate Package Kit and Install Tool
    • Complete LED Interior Light Replacement Package
    • 6000K White Super Bright 3014 Series LED Chips
    • Includes: 2 Map, 1 Dome, 2 Trunk/Cargo, 2 Vanity Mirror, 4 Door, 1 Glove Box, 2 License Plate, 2 Side Mirror Puddle Lights

     
    TrailSpecial22 likes this.
  26. Dec 17, 2023 at 2:43 PM
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,759
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    Kevin, These are the ones I had in my 20g Pro. I just received my new set for my 23. The seller is great to work with. His number is in the box with the bulbs. If you have any issues he will send you new ones out right away. I had an issue with the set in my tundra pro and he took care of me. I was waiting to get this set with the puddle lights so I can do them and the smoked sequential lights on the mirrors.
     
    LCJ77[QUOTED] likes this.
  27. Dec 17, 2023 at 2:45 PM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,028
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    Don,
    Great to hear that!
     
    RusPro17[QUOTED] likes this.
  28. Dec 17, 2023 at 4:14 PM
    kojak

    kojak New Member

    Joined:
    Sep 19, 2023
    Member:
    #35749
    Messages:
    277
    Gender:
    Male
    Vehicle:
    21 SR5P 4x4
    PXL_20231217_235723015~2.jpg

    Stuck some stuff on the roof. Will be nice to have more interior room for activities.
     
  29. Dec 17, 2023 at 4:38 PM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    2,483
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....
    Well, I haven't done it, yet.... But I pulled the trigger tonight and I'll get it installed on Dec 31st. (Best Buy's gonna install it).

    I upgraded my speakers several weeks ago (Trail Grid Pro's) and they sound great, but I ordered a Kicker amp and LCi 6 Channel Line Output Converter.

    [​IMG]




    [​IMG]




    When I had my speakers installed, I heard the same speakers with this setup installed and it sounded SO much louder. The bass was a lot deeper and the music was even more crisp.

    Don't get me wrong, the speakers sound much better than the crappy factory setup, but now....I can hear richer bass and crisper highs. All in, these two devices plus install will cost me $799.91
     
    Brett Tech, Lc200, 5six and 4 others like this.
  30. Dec 17, 2023 at 5:03 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,644
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    looks bad ass!
     

Products Discussed in

To Top