1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Dec 14, 2023 at 10:28 AM
    wingo

    wingo *****

    Joined:
    Nov 15, 2022
    Member:
    #29635
    Messages:
    336
    Gender:
    Male
    Vehicle:
    2020 Venture
    Modified my rear hatch grate so I have better access and not have to unscrew any screws when removing middles section.

    Hatch grate pic 1.jpg
    Hatch grate pic 2.jpg
     
  2. Dec 14, 2023 at 10:33 AM
    engineer90

    engineer90 New Member

    Joined:
    Oct 12, 2023
    Member:
    #36128
    Messages:
    566
    Gender:
    Male
    NJ
    Vehicle:
    2023 TRD Off-Road Premium, 2016 2-door GTI S manual
    What size?
     
  3. Dec 14, 2023 at 10:57 AM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    3,146
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....
    Stock!

    265/70 R17
     
  4. Dec 14, 2023 at 11:00 AM
    engineer90

    engineer90 New Member

    Joined:
    Oct 12, 2023
    Member:
    #36128
    Messages:
    566
    Gender:
    Male
    NJ
    Vehicle:
    2023 TRD Off-Road Premium, 2016 2-door GTI S manual
    Dang, they look beefy for being stock size! I didn't realize Wildpeaks were so bulky like that. E or SL? How does acceleration feel since they're heavier?
     
  5. Dec 14, 2023 at 11:25 AM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    3,146
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....
    They are SL's. They are only a few pounds heavier per wheel. But to be honest, I swapped out the stock tires the same day I bought the 4Runner, so I never got a good feel for how it previously drove.

    Rolling resistance seems fine/normal though. I can easily average 20-21mpg with these big ass tires on; to me that seems like a huge win. They "look" cool but I'm not downgraded to getting 16MPG like some of the other guys (the ones that have 285's or E loads - Those fuckers are HEAVY!)
     
    Last edited: Dec 14, 2023
    engineer90[QUOTED] likes this.
  6. Dec 14, 2023 at 12:27 PM
    Tooly

    Tooly New Member

    Joined:
    Mar 1, 2021
    Member:
    #20051
    Messages:
    412
    Okanagan, BC Canada
    Vehicle:
    2024 4Runner Off Road Solar Octane
    I'm going to guess one of the ABS wires got damaged or isn't seated properly.
     
    TrailSpecial22, raimieb and kolter45 like this.
  7. Dec 14, 2023 at 1:09 PM
    5thGin

    5thGin New Member

    Joined:
    Dec 27, 2022
    Member:
    #30282
    Messages:
    12
    Vehicle:
    5th Gen
    I used a mom and pop for my alignment. The tech owned a 4Runner off-road and showed me the additional steps required for the alignment. It included syncing several items. Not sure how critical it is, but the software did display those steps included for the 4Runner.
     
    Harringbr99 and kolter45 like this.
  8. Dec 14, 2023 at 1:38 PM
    Harringbr99

    Harringbr99 New Member

    Joined:
    Jun 9, 2022
    Member:
    #27404
    Messages:
    205
    Gender:
    Male
    First Name:
    Brian
    Kentucky
    Vehicle:
    2021 Barcelona Red Limited
    BudBuilt Skids/Sliders/Hidden Winch, Cornfed 2/1 XREAS lift, Custom Fab Rear Bumper
    BudBuilt Skids are painted and ready to install tomorrow!
    IMG_5991.jpg
     
  9. Dec 14, 2023 at 1:40 PM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,221
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    Who you trying to BS???o_OThat is NOT sitting in Stock OEM compliance!!:yes::cheers::poking: That IS the BEST Limited I have seen on here too!:cheers::hattip:
     
    Last edited: Dec 14, 2023
    Yazzman and Harringbr99[QUOTED] like this.
  10. Dec 14, 2023 at 1:47 PM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,221
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    So Raptor lights show up today. Looks like the harness IS long enough to go thru fire wall to pickup Tail/Stop Light Pwr supply so I can have them on W/"Parking lights!:yes:. The video from the Mfg made it look like it was only long enough to use in eng. bay, I was already to splice in wire so I can use the internal fuse box. We'll see Sat. IF I don't decide to do it tomorrow on working remote time??? Weather is supposed to be basically same both days BUT I always like to do stuff ASAP because you NEVER know what can come up work/personal wise too. I do have my Co. phone if email/call/text come thru! I get impatient when it comes to mods I had & want on new vehicle! Yeah I'm spoiled that way :oops::rolleyes::yes::frustrated:
     
    Last edited: Dec 14, 2023
    RusPro17 and Harringbr99 like this.
  11. Dec 14, 2023 at 1:58 PM
    Harringbr99

    Harringbr99 New Member

    Joined:
    Jun 9, 2022
    Member:
    #27404
    Messages:
    205
    Gender:
    Male
    First Name:
    Brian
    Kentucky
    Vehicle:
    2021 Barcelona Red Limited
    BudBuilt Skids/Sliders/Hidden Winch, Cornfed 2/1 XREAS lift, Custom Fab Rear Bumper
    @kojak - I second this post here. I did a "surprise" realignment off-roading in April which left the steering wheel cocked 30 deg left while driving straight and brought all those lights. The Alignment shop had to cycle through several steps to get the sensors to reset but the techs at the shop knew enough about 4 runners to make sure it all got completed before leaving.
    As an aside, even though PCS / Traction Control were offline, the important 4X4 systems were still online. 4LO and 4HI and A-TRAC all functioned. (for me that was because it was zero calibration not a wheel-speed sensor which would have thrown off A-TRAC).

    Your alignment shop should make this right or refund you the money and you can find a different local shop that is familiar with 4Runner alignments. (seems super suspect of them to say "all done" and have all these lights lit. I'd be concerned about trusting that shop to do any other work if they'd overlook something like that while driving out of the bay.)
     
    LCJ77 and TrailSpecial22 like this.
  12. Dec 14, 2023 at 2:13 PM
    Rocko9999

    Rocko9999 New Member

    Joined:
    Apr 21, 2023
    Member:
    #32488
    Messages:
    1,318
    Vehicle:
    2011 Limited
    I have a limited, so coming from 19" the Wildpeaks are noticeably heavier in regards to steering and driving in general. Just more meat on the ground with more grip. I saw 1mpg or so decrease.
     
    engineer90[QUOTED] likes this.
  13. Dec 14, 2023 at 2:47 PM
    qcTRDct

    qcTRDct New Member

    Joined:
    Mar 9, 2022
    Member:
    #26029
    Messages:
    469
    Gender:
    Male
    Vehicle:
    2022 ORP KDSS
  14. Dec 14, 2023 at 2:50 PM
    ProRunner

    ProRunner New Member

    Joined:
    Jan 15, 2022
    Member:
    #25157
    Messages:
    63
    Got merged into today. Time to shop for an aluminum full bumper.

    IMG_9280.jpg
     
    kolter45 and TrailSpecial22 like this.
  15. Dec 14, 2023 at 3:08 PM
    kojak

    kojak New Member

    Joined:
    Sep 19, 2023
    Member:
    #35749
    Messages:
    281
    Gender:
    Male
    Vehicle:
    21 SR5P 4x4
    I've read that before, guess I'll take a look. Seems like a weird thing to damage doing an alignment though. Haven't found any resolutions from searching besides "the dealer recalibrated the PCS".

    True, but I don't really feel like going round and round with them trying to fix it for the same reason. They did my last alignment with no issues.
     
  16. Dec 14, 2023 at 3:19 PM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,221
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    What the HEY?? Man that sucks!!! IF they just "merged into you" I'd be LIVID!!! P.S, They hit YOU!!!:frustrated::censored:
     
  17. Dec 14, 2023 at 3:58 PM
    ProRunner

    ProRunner New Member

    Joined:
    Jan 15, 2022
    Member:
    #25157
    Messages:
    63
    I was calm then, I’m a bit irritated about it now. Fortunately it’s relatively minor damage. I have a dash cam, so it’ll all play out alright.
     
    5thGin and LCJ77[QUOTED] like this.
  18. Dec 14, 2023 at 4:10 PM
    FN2187

    FN2187 Stormtrooper

    Joined:
    Jul 6, 2022
    Member:
    #27707
    Messages:
    1,722
    Earth
    Vehicle:
    2019 TRD ORP w/ KDSS
    Victory 4x4 Blitz front bumper Smittybilt 10k Synthetic Gobi Stealth no-rise RCI sliders Rago panels and shelf, dash mount RCI Alu skids Dobinsons 2.5/1.5 285/70 Cooper Discoverer Rugged Trek SSO Hitch Mounted Swingout Anytime Front/Rear Camera
    Glad it wasn't any worse! That doesn't look too bad for being merged into. Luckily it didn't result in a larger accident
     
    LCJ77 and raimieb like this.
  19. Dec 14, 2023 at 4:20 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    2,058
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    yep, get some!!

    IMG_1154.jpg
     
  20. Dec 14, 2023 at 4:24 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    2,058
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    any dirt or crap on the front sensor?
     
  21. Dec 14, 2023 at 4:24 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    2,058
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    crap!!! Yes time for full bumper
     
  22. Dec 14, 2023 at 4:27 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    2,058
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    additonal steps? Sounds like BS to me
     
  23. Dec 14, 2023 at 4:32 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    2,058
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    Somethings not right. i have a lifted 2022 Trail with 285’s and nothing had to be synced or reset. Had my local toyota dealership do it while i watched them. 20,000 later zero issues no warning lights ever.
     
    LCJ77 and raimieb like this.
  24. Dec 14, 2023 at 7:07 PM
    MR9160

    MR9160 New Member

    Joined:
    Oct 1, 2023
    Member:
    #35956
    Messages:
    5
    Gender:
    Male
    2/1 cornfed with KMC 542’s and 275/70/17 wildpeak’s
    before
    After
     
  25. Dec 14, 2023 at 7:54 PM
    TRDGrey2021

    TRDGrey2021 Guy in a truck

    Joined:
    Sep 1, 2023
    Member:
    #35400
    Messages:
    205
    Gender:
    Male
    Vehicle:
    2021 TRD Venture MGM
    Buncha Stuff
    Looking good.
    Those pouches with the gray piping and the towel holder....where did you find those sir?
    Thanks
     
  26. Dec 14, 2023 at 8:09 PM
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    602
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
    So I have a quandary for all the soothsayers out there:

    Today was heading down the interstate doing about 75. And suddenly my TPS threw an error and now isn't working. I'm guessing it's a sensor has gone bad perhaps? The only that has changed recently was newer rims (Toyota ones). Seems just weird timing after being on almost a week, and now this.

    If the sensors have gone out, about how much do they run?
     
  27. Dec 14, 2023 at 8:13 PM
    HazOpRed

    HazOpRed 22' TRDOR

    Joined:
    Dec 28, 2022
    Member:
    #30288
    Messages:
    298
    Gender:
    Male
    So I had some red laying around and decided to do the bits and pieces in red. All bolt heads too

    20231214_122634.jpg 20231214_122621.jpg
     
    Dabigono and Harringbr99 like this.
  28. Dec 14, 2023 at 9:49 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,063
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Wow that's a killer price, way to go
    Quality wheels man
    FML I paid this each ↓

    Screenshot_20231214-214740-295.png
     
  29. Dec 14, 2023 at 9:53 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,063
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Please don't get KO2's :p
     
  30. Dec 14, 2023 at 9:54 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,063
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Photos of it installed for the boys!?
     

Products Discussed in

To Top