What have you done to your 5th Gen 4Runner today?

Tinted front windows, ToyTec 3" Ultimate Lift, Camburg UCAs, TRD wheels, and Kumho Road Venture AT51 275/70-R17. The truck rides very smooth but the alignment specs are not all dialed in, still working on that.

 

Spent an hour at a local cb radio shop trying to get my radio tuned. Unfortunately we made no progress in reducing my SWR readings. Anyone else with a hood/a-pillar mount have trouble getting below 2.1 SWR readings?

Typed like a child on my Nexus 6P

 

Turned out great!

 

My control arm skid plates and trd pro shocks are in.

 

I thought you just put a lift on recently

 

Yea i did, did not know much at the time, and the company just put a spacer lift on, so now i am going to do it correct, and someone pointed me to a guy who overlands and owns tons of toyota trucks, and he is helping me get my truck right, so i am going to transfer my lift on to the new shocks.

 

Nice!

 

Unfortunately I don't think you can. I know there is a difference between the spacer lift made for the regular 4Runner and the TRD Pro The spacers are not the same.

 

Thanks Brochacho. I am happy with the way and it looks and definitely the ride. I will admit, the BFG KO2s look better, but I am good my choices.

 

Thanks, have tons of plans for the truck now

Idk, but these shocks already have a front spacer lift, dont know if it is the same as mine, bought them used with under 1k miles and never off road, so the guy had a level on it so i am transfering the rear lift. But i also wonder i have heard the shocks are higher to begin with.

 

I WANT!!! It's really bad because to see what I'm doing I use my cellphone flash light if I cannot park under the mall lighting.

 

Mark you did your Son's car right!!! I want the Gobi Rack eventually. I'm curious which ditch lights you're using and if you switched out the stock lights head\fog out yet???

 

Thanks Jon. I ordered the from Rago Fabricatipn. Brackets and lights were about $200 and I wired them to the high beams.

No, haven't changed any of the factory bulbs yet. Not really sure what to change them to. Everything that I wanted involved cutting into the dust cap and I really want to avoid doing that.

Do you have any ideas?

 

I wish I knew. I usually turn to PVT Pablo, Jester243 or Yourself. I've been researching all the lights from the interior to exterior!!! The interior I've been wanting to switch to LED but not sure which are good because I only want to replace once. haha Exterior is just as hard with many options but like you I don't want to do any cutting looking for items that are plug and play reliable.

 

Not today, but last night, I installed my full length Prinsu rack.



Typed like a child on my Nexus 6P

 

Thats badass!!I like your hood scoop black out as well... I may have to copy you.

 

This should have been posted to the "What did you do to your 5th GEN 4Runner YESTERDAY" ....Are you new here? Is anyone monitoring this forum? (kidding).

 

New leather upholstery installed today! Katzkin leather, ivory color, shout out to Auto Trim of Denver for doing an amazing install. Not the best pictures due to overcast Before and after.

 

That's pretty amazing. Looks better than my OEM "Leather" haha.

 

Had to wait until till I had some decent light haha

Typed like a child on my Nexus 6P

 

New shocks are in, skids are on. Next is window tint!

 

I dislike you all while I have to wait for mine to arrive... however I will love you all once again after I have received mine.

 

I also thought Toytec was the only one that had a spacer lift for the TRD Pro shocks but I just got a Ready Lift 3/2 installed at Toyota of Boerne this Thursday and it looks great on my TRD Pro

 

Nice, i have the ready lift as well, it was $200 cheaper, just a little rough on the old shocks, lot better on the trd pro shocks.

 

I know this is from a while ago, but what light bar is on your truck?

 

今天穿上狐狸後，減震器，喉嚨的鋼力，噴在熒光黃色輪子上。

 

That does not look good, but...wait.....Maybe when we can see the entire vehicle it will look better....but I doubt that.

Oh well, to each his own.

 

Jacked the truck up, and cleaned the skid plates. Also trimmed the front OEM skip plate because the control arm skid plates rubbed.

 

You've got everything but a dead cat in that skid plate...