1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Nov 12, 2024 at 8:18 PM
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    563
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
    You have to remove a few factory bolts. The flares themselves set atop the factory once. Pre drilled holes let you reinsert those factor screws. Now, I did have to drill (using a 5/16 drill bit) to create a few extra holes. Not terrible -- quite easy considering all your drilling thru is plastic. Most of those are filled with with plastic inserts to keep them attached (think of plastic inserts to keep the radiator cover in place under the hood).

    Edit: I forgot one import piece: the rear ones a little different. You do have to remove the OEM rear ones to allow those to attach properly. It's a little scary to remove them, but they prop right off once the screws are removed.

    screenshot-upload_wikimedia_org-2024_11_12-22_24_30.png
     
    Last edited: Nov 12, 2024
    Thacrow[QUOTED] likes this.
  2. Nov 12, 2024 at 8:51 PM
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    563
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
    I hate you @djwantke. I can't UNSEE this now. :rofl:
     
    MyWyfsRnnr and Thacrow like this.
  3. Nov 12, 2024 at 9:32 PM
    Thacrow

    Thacrow New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,546
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    Ballsy drilling holes
     
  4. Nov 12, 2024 at 10:23 PM
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    563
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
    MyWyfsRnnr and Thacrow[QUOTED] like this.
  5. Nov 13, 2024 at 2:00 AM
    2016SR5P

    2016SR5P New Member

    Joined:
    Aug 2, 2022
    Member:
    #28038
    Messages:
    157
    Gender:
    Male
    First Name:
    Jim
    Massachusetts
    Vehicle:
    2016 SR5P 4WD
    They look great! Trying to decide between these and Wildpeaks. Have heard great things about both. If anybody has experience with both, would love to hear your opinion.
     
  6. Nov 13, 2024 at 3:28 AM
    ThatGuyTheCooler

    ThatGuyTheCooler New Member

    Joined:
    Mar 1, 2024
    Member:
    #38884
    Messages:
    165
    Gender:
    Male
    SEPA
    Vehicle:
    2023 PRO
    You cannot go wrong with the wildpeaks
     
  7. Nov 13, 2024 at 8:28 AM
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,277
    Gender:
    Male
    Recently I posted a video showing where my almost 6 yr old jump starter pack casing exploded due to battery swelling.

    For my other jumper starter pack Aukey (Ordered on February 9, 2018) I tried to charge plugging in to the wall outlet for 2 days looks like the battery is not charging. It was just flashing but when unplugged there is no charge even enough for the flash light. Visually I don't see any damage to the casing but internally I do not know what is the status of the battery. May be safe to dispose it safely.


    20241113_091318.jpg 20241113_091327.jpg


    Edit -
    I opened the casing. Visually no damage to the battery. But I did smell some strong gas smell. (Could be the smell of glue).

    20241114_084256.jpg
     
    Last edited: Nov 14, 2024
    icebear and HuskyMike like this.
  8. Nov 13, 2024 at 10:38 AM
    bronconia

    bronconia New Member

    Joined:
    Mar 20, 2024
    Member:
    #39258
    Messages:
    1
    Gender:
    Male
    First Name:
    Cory
    Just replaced my fan/blower motor - SUPER easy on a 2016 limited. Three screws, one plug, and 30 minutes. No more fan speed issues, no more noises, blowing like a champ!
     
  9. Nov 13, 2024 at 5:20 PM
    ljerr2

    ljerr2 New Member

    Joined:
    Jul 29, 2022
    Member:
    #28006
    Messages:
    79
    Gender:
    Male
    IOWA
    Vehicle:
    2023 T4R Pro
    Nice! How were you able to end up with red stitching???
     
  10. Nov 13, 2024 at 11:50 PM
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    563
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
    Meant to reply, but forgot. Thanks for the vid. Looks relatively simple. Gracias!
     
  11. Nov 14, 2024 at 5:32 AM
    Y0TA

    Y0TA New Member

    Joined:
    Nov 3, 2023
    Member:
    #36511
    Messages:
    35
    Gender:
    Male
    Montana
    Vehicle:
    23 ORP w/ KDSS MGM
    I took it hunting up a gnarly road. First time engaging the locker and using the crawl control. Very impressed and so glad I have the clearance to venture out. My Buddy with me said it was fancy with all the 'batmobile buttons' haha...now he wants a 4runner, even though he was teasing me for lifting a 4runner.
     
  12. Nov 14, 2024 at 10:53 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,642
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Can’t go wrong with Wildpeaks or Baja Boss.
    There are many many threads discussing people’s experiences with these exact tires.

    Mickey Thompsons clearly are the superior choice…I have to say that cuz I slapped a massive MT sticker on my 4R. Wildpeaks are a heavier tire but the rest of the specs and performance are:
    IMG_0856.jpg
     
    2016SR5P[QUOTED], MyWyfsRnnr and BS67 like this.
  13. Nov 14, 2024 at 1:48 PM
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,277
    Gender:
    Male
    Thacrow and MyWyfsRnnr like this.
  14. Nov 14, 2024 at 3:55 PM
    vthoky

    vthoky New Member

    Joined:
    Aug 6, 2024
    Member:
    #42053
    Messages:
    303
    Gender:
    Male
    Virginia
    Vehicle:
    2024 TRD ORP
    Trailer connector relocate, tint, work lights, Pro wheels.
    This isn't something I use, but I'm curious how it works. Who's providing the service as we're running down the road, if it's not by way of our cell phone? How's this stuff work? :confused:
     
  15. Nov 14, 2024 at 4:02 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,642
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    I work in the industry, I think wifi hotspots use towers and satellites via LTE to give you internet just like your phone is doing.
    @kmeeg ur hotspot, all in, is cheaper than adding data to your plan!?
     
  16. Nov 14, 2024 at 4:18 PM
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,277
    Gender:
    Male
    Thw wifi hot spot works like a regular wifi router at home. Phones, laptops, tabs connected previously will automatically connect to the wifi. The wifi hotspot service is provided by AT&T. I pay $200/year. I don't know if there is a limit for no of connections/devices. Our family pays $15/month that comes with a small 5GB limit. I think having unlimited plans to our phones would cost more. Not sure.
     
  17. Nov 14, 2024 at 4:53 PM
    BLKNBLU

    BLKNBLU New Member

    Joined:
    Jul 23, 2024
    Member:
    #41779
    Messages:
    455
    Gender:
    Male
    First Name:
    Mike
    Arizona
    Vehicle:
    2019 TRD OR Nauti Blue
    Yeah, that comes out $31 and change per month. I don't think you can find an unlimited data plan for that price.
     
  18. Nov 14, 2024 at 5:11 PM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    2,716
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....

    I think I just proved you wrong....


    upload_2024-11-14_19-10-58.png
     
    kmeeg and Maximumdarkside like this.
  19. Nov 14, 2024 at 5:18 PM
    BLKNBLU

    BLKNBLU New Member

    Joined:
    Jul 23, 2024
    Member:
    #41779
    Messages:
    455
    Gender:
    Male
    First Name:
    Mike
    Arizona
    Vehicle:
    2019 TRD OR Nauti Blue
    Maybe. It is unsaid on both yours and kmeeg's examples if that is total or per line. Kmeeg said "my family" pays $15 and that sounds too good to be true but we can let him chime in. The ad you posted doesn't indicate one way or the other at least in the portion I can see.
     
  20. Nov 14, 2024 at 5:20 PM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    2,716
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....
    I've had Mint Mobile for years. I have the $15 per month plan. I pay it yearly in full. It's $180 a year, plus tax. I think it comes out to just over $200. That's for data & voice.

    Oh, to clarify, it's for ONE line.
     
    djwantke and playdixie like this.
  21. Nov 14, 2024 at 5:46 PM
    vthoky

    vthoky New Member

    Joined:
    Aug 6, 2024
    Member:
    #42053
    Messages:
    303
    Gender:
    Male
    Virginia
    Vehicle:
    2024 TRD ORP
    Trailer connector relocate, tint, work lights, Pro wheels.
    So, essentially, it's another subscription and the signal comes by cell towers.
    Or am I oversimplifying?
     
  22. Nov 14, 2024 at 6:23 PM
    4runningMan

    4runningMan New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,729
    New Mexico
    I think it's that simple. I believe the service runs through the AT&T network, if I recall correctly.
     
  23. Nov 14, 2024 at 6:34 PM
    bobby35

    bobby35 New Member

    Joined:
    Mar 18, 2023
    Member:
    #31834
    Messages:
    47
    Gender:
    Male
    Inspected my rustproofing , under the dirt its still super clean , im from Canada they salt the road here

    20241114_191303.jpg
    20241114_194836.jpg
     
  24. Nov 14, 2024 at 6:43 PM
    vthoky

    vthoky New Member

    Joined:
    Aug 6, 2024
    Member:
    #42053
    Messages:
    303
    Gender:
    Male
    Virginia
    Vehicle:
    2024 TRD ORP
    Trailer connector relocate, tint, work lights, Pro wheels.
    Got it. Thank you!
     
    4runningMan[QUOTED] likes this.
  25. Nov 14, 2024 at 6:52 PM
    BLKNBLU

    BLKNBLU New Member

    Joined:
    Jul 23, 2024
    Member:
    #41779
    Messages:
    455
    Gender:
    Male
    First Name:
    Mike
    Arizona
    Vehicle:
    2019 TRD OR Nauti Blue
    Cool. Good to know.
     
  26. Nov 14, 2024 at 7:05 PM
    CJT4Runner

    CJT4Runner Frosty

    Joined:
    Jan 11, 2020
    Member:
    #12672
    Messages:
    315
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    ‘20 TRD ORP
    I took my shift lever into a fabric store and matched the thread color. I took out every stitch and matched the factory pattern. It wasn’t that hard just tedious.
     
    ljerr2[QUOTED] likes this.
  27. Nov 14, 2024 at 7:37 PM
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,277
    Gender:
    Male
    Shoot.. Did I say that in video? Very sorry, That's wrong. Each phone plan is $15 per month. We have 3 personal phones.

    T-mobile prepaid - https://prepaid.t-mobile.com/connect/phone-plans?brand=connect
    upload_2024-11-14_22-3-12.jpg
     
    Last edited: Nov 14, 2024
    Thacrow likes this.
  28. Nov 14, 2024 at 9:58 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,642
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Each of your phone plans is $15 for 5 gigs or whatever, that’s low compared to my area I can barely buy a six pack of for $15. I’m in a liquor store right now lol

    IMG_7499.jpg
    IMG_7498.jpg
     
    BC Hunter, Thacrow and kmeeg[QUOTED] like this.
  29. Nov 15, 2024 at 11:53 AM
    Steely123

    Steely123 What's the new trend? I'll do it!

    Joined:
    Jun 4, 2022
    Member:
    #27323
    Messages:
    3,492
    Gender:
    Male
    TX
    Vehicle:
    2018 4runner SR5 premium
    Finally finished the 3rd row removal project with the cargo platform

    IMG_2522.jpg
    IMG_2523.jpg
     
  30. Nov 15, 2024 at 9:33 PM
    jstam316

    jstam316 New Guy

    Joined:
    Nov 23, 2022
    Member:
    #29747
    Messages:
    185
    Gender:
    Male
    First Name:
    John
    Kansas City
    Vehicle:
    ‘14 Limited
    I bought a black coroplast sheet and cut it to cover the gaps in the back by the way! Also had to trim the plastic pieces so that the coroplast was flat.
     
    Steely123[QUOTED] likes this.

Products Discussed in

To Top