What have you done to your 4th Gen 4Runner today?

Just changed out the plugs and coils on my '09 v6. Super easy for anyone curious about doing it yourself.

 

Changed the oil and filter today at 285k miles…..next change 290k.

 

What plugs did you go with?

 

bought this beast back in may 2024. I took her out and bumped into a tree after dodging a mama turkey with her chicks. It gave me a good reason to upgrade the front end.

 

NGK Iridium

 

FWIW, there’s debate over using iridium plugs in the 1GR-FE V6. Go to the 12:30 mark in this video. Make your own call of course but just wanted to mention this b/c so many people aren’t aware.

 

What bumper is that? Could you provide a link? I like the look of it. Thanks

 

I love happy accidents!! Looks great!

 

https://lilbscustomfab.com/

The bumper arrived ready t be installed as the company pre-welds bumper for you. I took very little modifications to get placed. We had the bumper on in about 1.5 hours and a 6 pack. Had a good time putting her back together.

 

It was a fun ride.

 

Wish I would've seen this before putting in the new iridium plugs, unsure what to do now??

 

Does anyone know here if you replace plugs with OEM on the 4.7 do they need to be gapped? I think I read something that says they come pre gapped but unsure.

 

Also just got the tb, water pump and rear brakes done on my scam artist 04 sr5. Now I noticed the rear main seal is leaking.

sucks I’m going to have about $8500 into this damn thing and it’s still got almost 300k miles on it

 

From what I’ve seen, many people use iridium plugs in the V6. I’m no expert so I hope someone with that experience chimes in. The 4th Gen has a couple of counterintuitive quirks, like this and the power steering system using ATF (but not the ATF that goes in the 4th Gen transmission).

 

They should already be gapped correctly....but I would check them out of OCD/habit....if you do check them and find any with an improper gap be very careful regapping them because the iridium electrode is very delicate.

The correct gap is 0.044

https://www.densoautoparts.com/part...Types[Wiper Blades][]=8852&dpfVehiclePartNum=

 

I put Ruthenium ngk plugs in mine a while ago, all but one were gapped to spec .044, the out of spec one was .047, i was able to push the tip to spec without damage to the electrode.

 

Replace the PCV first and I bet you the RMS leak stops...

 

you think so? I’ll definitely try that

 

You will be just fine. I ran Denso Iridium in my 07 FJ Cruiser with zero issues. Everyone said the same thing on the FJ forum.

 

https://www.ebay.com/itm/153054862566

 

285k….. and still one of the best mods I have done…..the blue is so awesome!

 

Got the 4runner back from the autobody shop...it's amazing how much money it costs no days for okay work...best place in town, too! She's looking good, just not as good as I hoped it would...next up, finishing the roof rack painting and sealing, throwing the S8 bar on it, replacing the leaking TYC headlight for OEM with morimoto 2 stroke bulbs, new windshield and it's dang near time to throw the snow tires back on! Ha! Snow next week!

 

Arrived home last evening from a New England road trip. Stats: 12 states, 3400+ miles, a 4000-lb. trailer much of the time, countless epic moments, & a 265K mile workhorse. Coincidentally, this month also marks 10 years since I bought my ‘07 Sport with 96K miles. Love this truck.

The one pucker-worthy moment came early, right after we picked up the trailer. Had a full tank but I didn’t realize right away just how bad MPG suffers when towing. Ended up with the low fuel light on many miles from the next exit, and this on the NY Thruway. :-O Made it to a gas station and it took 22.4 gallons, the most I’ve ever put in it. Fuelly calculated 8 MPG. I got that up to 11 later.

 

How she looks (better photos of paint work on hood and roof) before the new windshield, lightbar and headlights!!

 

Had a nice, constant roaring sound under the hood, suspected the fan clutch as I'm 99% sure the OG was still in there. That was it. Ordered the Aisin part from Amazon and just got done installing. Pretty easy job, semi-pro tip- if you don't want to drain the coolant to take off the top radiator hose- you can unbolt the shroud and the clutch and pull both out at the same time. Link to the clutch I ordered- https://www.amazon.com/dp/B008EEYMMG?ref=ppx_yo2ov_dt_b_fed_asin_title

Fits the 4th gen V6.

On to replacing the suspension, wheels and tires!

 

Do you have a write-up on how to do this? That blue is sweet!!

 

There are some videos on YouTube and there’s a who sells kits (HVAC & buttons only) or can do it all for you. You have to either send your cluster or bring your truck to his place. I got the kit and did my HVAC and buttons. I live close enough that I’m going to bring my truck to his place in Tennessee later to get the gauges done. I went with white.

 

Fixed a stone chip with the Permatrex repair kit. Went smooth enough, will see how it fairs at -40celcius in the next couple months.

 

-40c where are you located???? that's -40f & it's only Oct.

 

Replaced missing and original splash guards with Amazon ones. Pretty good quality IMO but needed to make modifications to make it fit.