Limited Front End

Isnt that black bracket set in bolts. It has not adjustment?

 

Not saying to adjust the bolts. Back of the bumper, has a square nub which seats into the bracket. It sits into one of these square openings.

 

Anyone have a photo of the back side of the bumper, of the square nubs that seat into that bracket?

 

Here are some. I dont see anything that the square nubs go into. All I see is this clip mechanism on top.
Mine is for the Limited bumper.

 

I’ll take a picture of the back of my bumper next time I remove it. But I believe it’s the square hole on the far right

 

Looking at the back of my Limited bumper, which uses a different headlight bracket. There is nothing on the backof my bumper that would go into the bracket.
Now, up top left in the photo here, those two tabs click on clips under headlamp.

 

Okay found these pics on eBay. I’ve circled the square nubs on the back of the trd bumper

 

That makes sense now. And your headlight bracket is different, which would allow the bumper to be guided into that.

 

I did the limited to trd front end. I needed new bumper and headlight brackets

 

When I ordered the brackets for the headlights, I received the ones for the non Limited originally. Dealership couldnt give me the right one, with VIN too.
Needless to say, I got the ones that are secured to the headlight with 2 screws. The non limited uses 3 screws and is physically quite a bit different, as you well know.

 

I have a 2014 Bumper, also noticed that those table are useless

 

I would look at back of limited bumper but sold it after the conversion