Leveling Front

Thanks!

Stiff sucks because it throws off the balance in handling front to rear. I totally get why you did this

 

I bought a used pro and the guy gave me the exact spacers you have. He assured me I can put 33s on it with this lift. Are you running 33s? Any rubbing at all? Ty!

 

Did you end up installing the Burtman. I have that lift, it came with the used pro I bought and the guy told me I can run 33s on my pro if I install it…. Any insight would be great! Ty!

 

@littlemrnofear unfortunately there’s no easy answer to 33’s on a 4 Runner.

 

Have a good alignment done, a bit positive caster should work. I have no rubbing.

 

Looking through your 4R window, the landscape is green and defined the other sections your camera captured are not. Looks like your 4runner has polarized glass.

 

No, I drove a 2019 ORP silver with the Pro package evrything the same, besides the TRD Pro front skid plate.

 

Lift: Dobinsons IMS59-50700 shocks - coils C59-302 Front - Dobinsons shocks IMS59-50705 - Coils C59-505 Rear. 2.7" front lift (shocks adjustable set at 215mm from the strut bushing eye to support a 2.7” front lift). No Upper Control Arms needed, with the Bf Goodrich KO2 285/70/17 installed about a 4" lift; works wonders. Highly recommended. I like a little bit rake, hence, you can adjust these shocks, so, you can be leveled.



Moab, UT with Dobinson’s lift and Bfg KO2 285/70/17 | Toyota 4Runner Forum [4Runners.com]