1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Less than 6 months and 7500 miles and hitch is already rusting

Discussion in '5th Gen 4Runners (2010-2024)' started by bassist, Jan 7, 2024.

  1. Jan 8, 2024 at 5:58 AM
    #61
    DadOperator

    DadOperator New Member

    Joined:
    Jul 30, 2022
    Member:
    #28011
    Messages:
    160
    Gender:
    Male
    Vehicle:
    22 Trail Special Edition
    I have this too!
     
  2. Jan 8, 2024 at 6:10 AM
    #62
    Lc200

    Lc200 New Member

    Joined:
    Jun 16, 2023
    Member:
    #33430
    Messages:
    917
    Gender:
    Male
    Vehicle:
    Pre Facelift SR5P
    Have one too. Plus this does not move no matter what pressure washer I use. Has these ridges on all sides. One of my first'mods' actually.

    IMG20240108080739.jpg
    IMG20240108080833.jpg
     
    bassist[OP] and Trail Runnah like this.
  3. Jan 8, 2024 at 10:28 AM
    #63
    3JOH22A

    3JOH22A トヨタ純正男娼

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,373
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    bassist[OP] likes this.
  4. Jan 8, 2024 at 11:28 AM
    #64
    K20K54R

    K20K54R New Member

    Joined:
    Oct 6, 2023
    Member:
    #36022
    Messages:
    102
    Rust Never Sleeps, eh?

     
    LCJ77 likes this.
  5. Jan 8, 2024 at 11:54 AM
    #65
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,106
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    They live on an island surrounded by an ocean of saltwater! The plant in on a man made island to load the xport ships right from factory.:cheers:
     
  6. Jan 8, 2024 at 12:00 PM
    #66
    3JOH22A

    3JOH22A トヨタ純正男娼

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,373
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    ^They don't understand rust any more than folks in Los Angeles do (also a coastal city at similar latitude) ;)
     
  7. Jan 8, 2024 at 12:01 PM
    #67
    Ripper238

    Ripper238 New Member

    Joined:
    Jan 21, 2023
    Member:
    #30792
    Messages:
    973
    Gender:
    Male
    Vehicle:
    2019 TRD OR
    I think SlvrSlug was pulling your leg a bit because this is somewhat silly to be concerned over. This would not be a warranty claim, its normal as everyone has stated, but the dealer may spray some paint on it for you.

    Paint on hitches chip, even if you don't use them because of its location. If you use it it will rust a lot more, but take 30 years for it to be an issue due to the gauge of the steel.
     
  8. Jan 8, 2024 at 12:02 PM
    #68
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,106
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    Still have mine from my 2008 FJ, lasted on the 2012, on the 2015 Tacoma & the 2018 TRD OR. I did switch for a carbon fiber look W/Red TRD on it, this one is plastic & has hole to put locking pin through. I put some black RTV on the 4 ridges to make the rubber Cap fit snug.
     
    Technologic80[QUOTED] likes this.
  9. Jan 8, 2024 at 12:10 PM
    #69
    3JOH22A

    3JOH22A トヨタ純正男娼

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,373
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    Dealer will probably profit by selling you a touchup paint pen and telling you to come back only if rust hole has occurred (which is what the corrosion warranty covers).

    You're selling your 4Runner? What are you replacing it with?
     
    Ripper238 likes this.
  10. Jan 8, 2024 at 12:13 PM
    #70
    Technologic80

    Technologic80 Sexy Member

    Joined:
    Oct 9, 2023
    Member:
    #36086
    Messages:
    465
    Gender:
    Male
    First Name:
    Chris
    SE Michigan
    Vehicle:
    '23 TRD Off Road Premium
    Black TRD Wheels, and a bunch of AVS Plastic shit
    Wait. Isnt the hitch receiver itself held on by a few bolts? Or is it integrated (welded) into the frame somehow and not easily replaceable?

    Because if its removable with a few bolts, why not just remove it and either a.) paint it with some heavy duty rust resistant coating, or b.) replace it if you are concerned about the rust?
     
  11. Jan 8, 2024 at 12:15 PM
    #71
    3JOH22A

    3JOH22A トヨタ純正男娼

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,373
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    ^Yes, 6 bolts.

    I'm not the one creating a Friday thread on a Sunday. :laughing:
     
    Technologic80[QUOTED] likes this.
  12. Jan 8, 2024 at 2:53 PM
    #72
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    6,737
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeak AT4
    This thread sounds a lot like with the one(s) about the seat belt mounting bolt threads showing in the wheel wells. Some view this type of thing as a warranty claim, others view it as a challenge to improve upon what the factory deems acceptable, and make their 4R better than the way they got it.
     
    Last edited: Jan 8, 2024
    Trail Runnah and LCJ77 like this.
  13. Jan 8, 2024 at 3:16 PM
    #73
    broken-giver

    broken-giver BFD

    Joined:
    Apr 14, 2023
    Member:
    #32346
    Messages:
    1,036
    Gender:
    Male
    no salt on road?
     
  14. Jan 8, 2024 at 5:06 PM
    #74
    mac1usa

    mac1usa New Member

    Joined:
    Oct 20, 2020
    Member:
    #17452
    Messages:
    2,291
    Yep I was one of those guys complaining about that bolt also.

    I was raised and taught if you’re going to do something give it 110 percent or don’t bother doing it at all. I don’t believe in doing things half ass. Having said that I recognize Toyota is in the business to make money and make shareholders happy. However, as a consumer and accountant I believe that sometimes the incremental cost to improve something can add to consumer satisfaction as well as consumer loyalty. There are others though that view the costs as savings and well the product is “good enough”.

    To me rectifying that bolt issue seems like could be an easy fix and covered with insulation.

    I also am confident that something could be done in the factory to the frames and trailer hitches etc to mitigate the rusting process. Imagine how much more praise this vehicle would have in this forum alone should that issue be resolved and turn into more sales. Many of us would gladly even pay more to not have these concerns.

    That is just my opinion though and we are entitled those and I respect those who disagree.
     
    Thatbassguy likes this.
  15. Jan 8, 2024 at 5:17 PM
    #75
    Antmart26

    Antmart26 New Member

    Joined:
    Jan 15, 2021
    Member:
    #19140
    Messages:
    50
    Gender:
    Male
    First Name:
    Anthony
    Vehicle:
    2021 venture
    3 years of Buffalo winters. Hitch gets used for a bike rack so it takes a beating. I also use the plug. Pre and post treatment pics. Frame had surface rust and buzzed it off easily before touch up and fluid film. IMG_9157.jpg IMG_9156.jpg IMG_9158.jpg IMG_9159.jpg
     
    djwantke, gomiami and LCJ77 like this.
  16. Jan 8, 2024 at 5:46 PM
    #76
    mac1usa

    mac1usa New Member

    Joined:
    Oct 20, 2020
    Member:
    #17452
    Messages:
    2,291
    Yeah looks good Antmart.

    Can I ask prior to your touch up did you treat the frame when new with fluid film or something similar. Or is this year 3 and you touched up now?
     
    djwantke likes this.
  17. Jan 8, 2024 at 8:09 PM
    #77
    Antmart26

    Antmart26 New Member

    Joined:
    Jan 15, 2021
    Member:
    #19140
    Messages:
    50
    Gender:
    Male
    First Name:
    Anthony
    Vehicle:
    2021 venture
    @mac1usa I've fluid filmed annually since I bought it so 3x. However, (and no good reason except I'm an idiot) I never took the hitch off to buzz the rust, paint and FF. So thats a first time correct.
     
  18. Jan 8, 2024 at 9:47 PM
    #78
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,637
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Nice
    Clear or Black FF?
     
  19. Jan 9, 2024 at 6:34 AM
    #79
    bassist

    bassist [OP] New Member

    Joined:
    Aug 15, 2023
    Member:
    #34926
    Messages:
    914
    Gender:
    Male
    Vehicle:
    2023 TRD Offroad Premium
    Got rust proofing done at time of purchase.
     
  20. Jan 9, 2024 at 6:40 AM
    #80
    bassist

    bassist [OP] New Member

    Joined:
    Aug 15, 2023
    Member:
    #34926
    Messages:
    914
    Gender:
    Male
    Vehicle:
    2023 TRD Offroad Premium
    Sorry, but I don’t agree with simply shrugging my shoulders when Toyota has failed to meet a standard that even the Italians manage to hit.

    I get that people like Toyota, but you see the same thing with VWs and Subarus where people will accept something less than the duty to provide the quality they paid for.

    The part in question retails for over $300.

    I have yet to see an explanation as to why anything that is failing under the BUMPER TO F***ING BUMPER warranty shouldn’t be replaced under warranty.

    If your bumper cover started warping in under six months because you parked your car outside once in August, would you shrug your shoulders?
     
  21. Jan 9, 2024 at 6:42 AM
    #81
    bassist

    bassist [OP] New Member

    Joined:
    Aug 15, 2023
    Member:
    #34926
    Messages:
    914
    Gender:
    Male
    Vehicle:
    2023 TRD Offroad Premium
    I’m not selling my vehicle. I’m responding to the notion that I should sell it to absolve Toyota from its obligation.

    The car is still under the bumper to bumper warranty, and paint failure isn’t acceptable.
     
    Trail Runnah likes this.
  22. Jan 9, 2024 at 6:43 AM
    #82
    bassist

    bassist [OP] New Member

    Joined:
    Aug 15, 2023
    Member:
    #34926
    Messages:
    914
    Gender:
    Male
    Vehicle:
    2023 TRD Offroad Premium
    It’s three or four bolts.

    I shouldn’t have to spend the time, effort, or money to fix something defective.
     
  23. Jan 9, 2024 at 6:56 AM
    #83
    Trail Runnah

    Trail Runnah New Member

    Joined:
    May 8, 2020
    Member:
    #14189
    Messages:
    2,994
    Gender:
    Male
    Vehicle:
    2013 T4R Trail Edition
    Stock
    Yup, my Volvo is 6 years older than my 4Runner, and has never had any additional care towards preventing rust, and still looks so much better than the 4R. It's an 07 and the Volvo corrosion warranty was 12 years/144k miles. You'll never see Toyota stand behind a vehicle like that.

    IMO you should absolutely be able to "neglect" a modern vehicle without worrying about excess corrosion.
     
    bassist[OP] likes this.
  24. Jan 9, 2024 at 7:03 AM
    #84
    Trail Runnah

    Trail Runnah New Member

    Joined:
    May 8, 2020
    Member:
    #14189
    Messages:
    2,994
    Gender:
    Male
    Vehicle:
    2013 T4R Trail Edition
    Stock
    Agree. I'd be upset if I paid the ridiculous money they're asking for these things only to have peeling paint shortly after.

    Whatever the coating is, it was probably thin on the sharp edge, and started lifting from there. You don't need snow or brine for that, just bare metal and humidity.

    It IS crazy that Toyota seemingly gets a pass for corrosion issues, year after year. They're not alone in having them, but the fact that the known Achilles heel of these is rust should not sit well with them.

    What good is reliability if It's inevitably going to be a rusty POS?
     
  25. Jan 9, 2024 at 7:11 AM
    #85
    Ripper238

    Ripper238 New Member

    Joined:
    Jan 21, 2023
    Member:
    #30792
    Messages:
    973
    Gender:
    Male
    Vehicle:
    2019 TRD OR
    Not saying shrug your shoulders and not try to get a resolution. Just that your issue is not a failure, is cosmetic and is subjective, which does not require replacement, at best maybe some touch up.

    If you get a chip on you hood would it be a failure and covered under that bumper to bumper warranty getting you a new painted hood?

    Ether way dealers have some extra $$$ to fix issues and hopefully they will touch it up for you or even replace the whole hitch. You don't get if you don't ask, as i always say.

    I look forward to hearing how it goes.
     
    LCJ77 likes this.
  26. Jan 9, 2024 at 7:25 AM
    #86
    bassist

    bassist [OP] New Member

    Joined:
    Aug 15, 2023
    Member:
    #34926
    Messages:
    914
    Gender:
    Male
    Vehicle:
    2023 TRD Offroad Premium
    Funny you mentioned that.

    I actually got a fender, hood and part of the body of my last vehicle repainted under warranty.

    Fender: apparently I’m the only person on the planet who buys an Italian vehicle where the tolerances are tighter than factory spec, which meant that every bump I hit was causing the headlight to come into contact with fender, resulting in paint chipping.

    Hood: trailing edge of the hood (facing the windshield) had a few paint defects, one of which was poorly covered up.

    Body: inside the tailgate area, up near the lifting mechanism, there were paint chips.


    The kicker was that this had the coolest paint I’ve ever had on a car…it was an optional paint that was a $3k option.

    Took some fighting, and had to go to executive customer service because the regional guy wouldn’t approve the claim without seeing it, but also kept refusing to come out to see it. At the end of the day, I got it done.

    I really need to figure out a way to earn a living helping people get things resolved for themselves. It’s certainly proved a talent over the years, and it’s come in handy as the trend is now to screw customers over.
     
    Ripper238[QUOTED] likes this.
  27. Jan 9, 2024 at 7:31 AM
    #87
    Ripper238

    Ripper238 New Member

    Joined:
    Jan 21, 2023
    Member:
    #30792
    Messages:
    973
    Gender:
    Male
    Vehicle:
    2019 TRD OR
    Yeah you really have to go to the top, as they say. Takes some effort and communication skills but you can get things done.

    I had an Expedition that an overhead bulb melted the lense and dealer said it was not covered and would cost $800 to replace to whole overhead assembly. Totally ridiculous.

    After fighting with the dealer i sent a letter to the VP and president of Ford and followed up with a call. Long story short, the VP's secretary took care of getting it covered.

    I would love to have a business helping people get things resolved!
     
  28. Jan 9, 2024 at 8:16 AM
    #88
    Trail Runnah

    Trail Runnah New Member

    Joined:
    May 8, 2020
    Member:
    #14189
    Messages:
    2,994
    Gender:
    Male
    Vehicle:
    2013 T4R Trail Edition
    Stock

    My mom's Caddy had an issue with the nav system years ago. My dad had done some research, found it was a common issue with the 2010s, GM had warrantied it.They had bought it used from a Cadillac dealer, the dealer wanted to charge them 2k because they claimed it was not covered.

    My dad finally got in touch with Cadillac corporate and explained the situation, shortly after he got a call from that dealer to make an appointment, they were going to cover it.
     
    Ripper238[QUOTED] likes this.
  29. Jan 9, 2024 at 9:20 AM
    #89
    Antmart26

    Antmart26 New Member

    Joined:
    Jan 15, 2021
    Member:
    #19140
    Messages:
    50
    Gender:
    Male
    First Name:
    Anthony
    Vehicle:
    2021 venture
    Black FF.
     
  30. Jan 9, 2024 at 9:21 AM
    #90
    Antmart26

    Antmart26 New Member

    Joined:
    Jan 15, 2021
    Member:
    #19140
    Messages:
    50
    Gender:
    Male
    First Name:
    Anthony
    Vehicle:
    2021 venture
    Rustoleum then FF.
     
    LCJ77 and gomiami like this.

Products Discussed in

To Top