djwantke 2016 White Trail build and travels

For sure. Love a good high clearance rear. I don’t mess around haha.

 

Guide:
Rear bumper cover “clearance chop”
2016 ORP

>This cut likely precedes dom tubing weld work
>To get out ahead of that did the bumper cover cut myself, so I’m to blame if it’s janky
>Note:
rear bumper cover was already was painted black on lower portion in a separate project.
factory rear mudguards previously cut off with a reciprocating saw.


1. YouTube how to remove bumper cover and do that. Unclip the valance easily from backside.


Mask off and then spray out flat black the lower half of the newly exposed painted metal that lies behind the rear wheels, and under hatch a bit.


Spray inner foam piece flat black. Add a couple 3M Velcro strips between foam and crossmember.


*I bent undercarriage fastening brackets UP with a rubber mallet, since they ain’t doing anything no more.



2. Tape off a straight line on bumper cover using masking tape, starting just under the third fastener from the seam with the body (12” down from seam), and line that mark up with the top edge of all the valance clip fastener slots in bumper cover. (If you don’t have valance trim, the cut is 1-3/4“ down from top surface of bumper cover step).





For the fender liner behind wheel, cut it in a straight line across starting from your cut line that’s just under third fastener from seam (12” down from seam)




3. Trace top edge of the masking tape with a dry erase marker. Remove tape and fix your cut line where needed. I tried to stay parallel with the horizontal bumper/body seam.


4. Fasten bumper cover upside down, to some kind of table or platform, using screws through inconspicuous existing holes.



5. Wear eye & ear protection. Cut your line with a corded Dremel tool, recommend cutoff wheel No. 409. I broke like 4 of ‘em. Let the melted plastic pelt your face!





6. Peel what you can off cut edge by hand. Sand edge quickly w/ 120grit, I used a corded multitool.



7. Reinstall bumper cover.



8. Install black automotive edge trim w/ heat gun, especially if you’re below 18°C/65°F. I bought at Canadian Tire.





Sink a self tapping screw through fender liner into a metal bracket area behind it, between the second and third fastener down from seam.



Extra angles:

 

I think all the photos work now ^

@scottiezilla @Thacrow @Photon_Chaser @raimieb @captrussia253

 

Nicely done!

 

Only thing left to do is to cut off that rear crossmember at the rear body mount and move it upwards…add a couple of flanges and gussets to reinforce.

Come on Dj, let’s see some welding skills!

 

Looks great. You have the clearance now.. and room for a custom rear bash bar with side hoops

 

Exactly! Side hoops would be rad

I’m no welder tho…yet lol. I’ll likely use someone here on the coast

 

Sunday

filled gas tank.




drove family in 4R our favorite park on Alouette River that just reopened after renovation. mom treated the boys to nugget happymeals.






outside garage I drilled & chopped brackets for rear LED pods. now they don’t stick out a lot.








completed the look I was going for.

 

I didn’t notice the “bootiepic” reference last time
Finished nightshifts last night, got to take a daylight photo this morn.

 

DUUUDE
Haha I was gonna say something like
Well folks he’s at it again…pictures of DarkAssCanada
That looks great, can really see the clearance as well…throw that DOM on there or not(we know it’s coming), looks “finished” with the lights up
Excited to see next step

 

LOL I woulda had it coming!
My bad, Canada is dreary and dark af in winter.
Thanks bud

 

Late night grocery shop after bedtime for children’s food, and crucial items for dad: eggs, bacon, hashbrowns, eggos

 

more crucial supplies:

 

•removed 5 decals from skid wind guard
•made a mistake installing ARB skid kit, re-added spacers where I had forgotten
•cleaned off-road light lenses
•jammed to Metallica

 

THIS would be a good thread!
“What couldn’t wait till tomorrow…”
That amount of crap I get in the last minutes before closing is beyond me…I’m not that guy but based on schedules n ideas…necessary haha

 

Dude right!? Haha
I was the last guy in No Frills, and Walmart was closing within the hour.
And now it’s almost time for me to start my yearly last minute manly Christmas shopping

 

broke the set of Christmas lights on the 4R Garage again








100% my wife’s face when lights go on tmro

 

Drove out to service one of my led video walls at the #2 Mazda dealership in Canada (swapping motherboard out. I’m an audio visual engineer).



look at this old Mazda!: