1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Sep 13, 2024 at 7:05 AM
    clt_ah4runner

    clt_ah4runner New Member

    Joined:
    Jun 30, 2020
    Member:
    #15234
    Messages:
    37
    Gender:
    Male
    First Name:
    aaron
    Vehicle:
    2020 army green 4runner TRD Pro
    Put in a blue sea below deck power panel in cargo area. Connected it to a blue sea 4 circuit fuse block and a mini bus that I mounted behind the quarter panel trim using some female threaded rubber coated magnets. The fuse block and bus are bolted onto the magnets so I didn't have to use vhb tape or screw it into the sheet metal. This allows me to place them where needed and pull them out easily to access a fuse or add an accessory.

    20240913_094952.jpg
    20240913_095033.jpg
     
    ColeRunner, Thacrow, Dabigono and 4 others like this.
  2. Sep 13, 2024 at 7:14 AM
    Greg D

    Greg D New Member

    Joined:
    Aug 6, 2019
    Member:
    #10809
    Messages:
    765
    Gender:
    Male
    First Name:
    Greg
    Vehicle:
    2013 4runner
    Borla exhaust, Jet MAF sensor, K&N filter, Hayden rapid cool transmission cooler, Hella horns, electric fan, Pedal Commander, Derale power steering cooler,
    I noticed that on my Limited. I need another skid plate for the gap. Eventually replacing with 2014+ front for options or 2013 Trail grille and bumper cover. I took a picture beside a Trail at VA and I could see then the bigger grille opening and larger lower bumper opening where larger than mine. I assume to allow more air to engine crawling along on the trail. I want a hide bumper. Not a lot of 2010-13 options. With Trail less cutting and can probably make fit.
     
  3. Sep 13, 2024 at 7:34 AM
    legend1011

    legend1011 New Member

    Joined:
    Apr 15, 2024
    Member:
    #39838
    Messages:
    201
    Gender:
    Male
    Vehicle:
    2024 White 4Runner TRD Offroad Premium (No KDSS)
    Ouch! my fear on the highway but I know it's bound to happen. What's the plan for replacement?

    I don't have autoglass coverage and go back and forth if I should add it. Also, not sure what a cost on a 5th gen is as I hear we have to calibrate a sensor(s).
     
    BS67[QUOTED] likes this.
  4. Sep 13, 2024 at 7:36 AM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,113
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    Get the plate #?
     
    BS67[QUOTED] likes this.
  5. Sep 13, 2024 at 8:22 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,642
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Wow, great work, totally stealing this idea you blew my mind with those magnets
     
  6. Sep 13, 2024 at 8:23 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,642
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Buying myself a Toyota stealership oil change for the first time since 2017, for my 36th birthday today.

    The most cringe birthday card of the year goes to Open Road Toyota and their poem.

    photo of my 4R for reference :laugh:

    IMG_5468.jpg
    IMG_5450.jpg
     
  7. Sep 13, 2024 at 8:33 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,642
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    ^
    IMG_5070.png
    ^ i’ll take this shirt for my birthday please,
    thanks
     
  8. Sep 13, 2024 at 9:11 AM
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,280
    Gender:
    Male
    Not something I did but found. Rigid Industry SAE for 150 bucks.
    https://amzn.to/3ZnOK60

    Just searched vs Rigid site -
    upload_2024-9-13_10-12-23.png
     
    Thacrow and Maximumdarkside like this.
  9. Sep 13, 2024 at 11:20 AM
    94hokie

    94hokie New Member

    Joined:
    Mar 22, 2024
    Member:
    #39296
    Messages:
    201
    Gender:
    Male
    Vehicle:
    23 TRD ORP Lunar Rock
    Just finished removing my raptor lights. I know, I know, there's split opinions on them but after the novelty wore off I decided I didn't want to have something plugged into an add a fuse. Now if only I could find my bag of small UV resistant black zip ties so I could put my piece of gutter mesh back in....
     
  10. Sep 13, 2024 at 11:47 AM
    engineer90

    engineer90 New Member

    Joined:
    Oct 12, 2023
    Member:
    #36128
    Messages:
    552
    Gender:
    Male
    NJ
    Vehicle:
    2023 TRD Off-Road Premium, 2016 2-door GTI S manual
    I hit the jackpot, I've had my TRD wheels since last year, but didn't get new tires, so pulled the trigger on Falkens AT3W for super cheap, but they sent me AT4W instead! These look AMAZING! So aggressive and beefy. I stayed with 265/70/17 size and surprisingly these are much bigger than the OEM Dunlops. Also ordered Wescott sliders!

    IMG_6742.jpg
     
  11. Sep 13, 2024 at 11:56 AM
    meats

    meats New Member

    Joined:
    Aug 25, 2024
    Member:
    #42405
    Messages:
    120
    Gender:
    Male
    Broken Arrow, OK
    Vehicle:
    2018 Magnetic Gray TRD OR
    2/1 Cornfed Leveling kit Sway Bar Delete 285/70/17 - Arroyo Tamarock M/T
    ARK mud flap deletes just got here from 4Runner Lifestyle

    IMG_6243.jpg
     
  12. Sep 13, 2024 at 12:41 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,642
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    ^ nice
     
    meats likes this.
  13. Sep 13, 2024 at 5:16 PM
    BS67

    BS67 8404 USMC Doc

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    6,124
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    Got a quote from the dealership, Allstar and a local glass replacement that does great work. Local installer quoted me $735 for replacement with recalibrate. Allstar was $30 higher and dealer was around $950. Went with the local installer who is gonna do the work next thursday. Said it'd take about 3 hours!
    I didn't...was an 18-wheeler with 2 semis behind him and I bet they were going above 80mph. Don't think I woulda caught him and if I did would have been my word against his.
     
  14. Sep 13, 2024 at 6:35 PM
    Thacrow

    Thacrow New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,546
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    Just posting to take a break because I don't feel like doing this. Swapping vents and Hazzard button from a Kenwood floating screen to a Dasaita

    20240913_183336.jpg
     
    j4unner and Dabigono like this.
  15. Sep 13, 2024 at 10:03 PM
    meats

    meats New Member

    Joined:
    Aug 25, 2024
    Member:
    #42405
    Messages:
    120
    Gender:
    Male
    Broken Arrow, OK
    Vehicle:
    2018 Magnetic Gray TRD OR
    2/1 Cornfed Leveling kit Sway Bar Delete 285/70/17 - Arroyo Tamarock M/T
    Great kit. Super easy to do. Looks slick. More room and clearance for sure.
    IMG_6261.jpg
    IMG_6270.jpg
    IMG_6271.jpg

    IMG_6273.jpg
     
  16. Sep 13, 2024 at 10:55 PM
    Thacrow

    Thacrow New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,546
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    Happy Birthday Dude!
     
    djwantke[QUOTED] likes this.
  17. Sep 13, 2024 at 10:57 PM
    Thacrow

    Thacrow New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,546
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    Can we see more of the wiring job? From what little I can see it looks like you did a very good job
     
  18. Sep 13, 2024 at 11:59 PM
    BettyWhite

    BettyWhite New Member

    Joined:
    Aug 16, 2024
    Member:
    #42242
    Messages:
    77
    Gender:
    Female
    First Name:
    Spice
    Vehicle:
    2024 4RnrSR5P
    Roof rack...for now
     
  19. Sep 14, 2024 at 12:03 AM
    BettyWhite

    BettyWhite New Member

    Joined:
    Aug 16, 2024
    Member:
    #42242
    Messages:
    77
    Gender:
    Female
    First Name:
    Spice
    Vehicle:
    2024 4RnrSR5P
    Roof rack...for now
    Ceramic coated inside/outside and interior detailed. Betty White is so shiny!
    IMG_2220.jpg
    IMG_2222.jpg
    IMG_2223.jpg
    IMG_2229.jpg
    IMG_2227.jpg
    IMG_2230.jpg
     
  20. Sep 14, 2024 at 6:25 AM
    kojak

    kojak New Member

    Joined:
    Sep 19, 2023
    Member:
    #35749
    Messages:
    281
    Gender:
    Male
    Vehicle:
    21 SR5P 4x4
    Already have a nice chip in my new windshield; there's no preventing it if you drive two lane roads with tread-sized pebbles.

    20240914_080436.jpg

    Speaking of windshields, upgrading back to factory blades. Don't let your dealer sell you those cheap Sightline ones.
     
  21. Sep 14, 2024 at 7:14 AM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    2,721
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....

    I had this happen to my 2021 Tacoma a few years back. LUCKILY, I captured it on my dash cam. I had a Garmin Mini 2 at the time. The trucking company paid out of pocket to have it replaced. I went to SafeLite and used OEM glass. Because of the camera/sensors the windshield cost about $1600, installed and calibrated.

    I didn't pay a dime. My brother-in-law is my insurance agent and he told me that most insurance companies throw in windshield protection for almost nothing and some offer it for free. I have it in my policy and the deductible for it is $50
     
    TrailSpecial22 and BS67[QUOTED] like this.
  22. Sep 14, 2024 at 8:20 AM
    ipnpulz

    ipnpulz New Member

    Joined:
    Oct 14, 2018
    Member:
    #7455
    Messages:
    801
    Gender:
    Male
    Vehicle:
    2023 TRDOR premium T4R
    IMG_0011.jpg
    Possible 24 coming my way if we can make a deal......
     
  23. Sep 14, 2024 at 8:27 AM
    Jennyjo14

    Jennyjo14 New Member

    Joined:
    Aug 12, 2024
    Member:
    #42156
    Messages:
    332
    Gender:
    Female
    First Name:
    Jennifer
    Vehicle:
    2024 Toyota 4Runner SR5 Premium 4x4
    None
    Went to Urgent Care today, thinking I had the flu or something. Turns out it was allergies. I'll try the off-road adventure tomorrow or next weekend.


    Ooooh! There it is!
     
    Last edited: Sep 14, 2024
    icebear likes this.
  24. Sep 14, 2024 at 10:26 AM
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    563
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
    I had to have mine replaced last summer. I called around mine was comparable prices between 500-800. I checked with a local shop where I live, and I asked what CASH price was. He said $550 (which included recalibration). I was prepared for taxes and etc. Straight cash was $550.

    Cash has less paper trail.
     
    BS67 likes this.
  25. Sep 14, 2024 at 12:34 PM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,113
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    Used it to bring home 4 bundles of corn stalks for fall decorations. Wifey just finished planted Mums around Post light
     
    Last edited: Sep 14, 2024
    Harringbr99, BS67 and RusPro17 like this.
  26. Sep 14, 2024 at 1:18 PM
    ipnpulz

    ipnpulz New Member

    Joined:
    Oct 14, 2018
    Member:
    #7455
    Messages:
    801
    Gender:
    Male
    Vehicle:
    2023 TRDOR premium T4R
    Well the fuckery started soon after damn I hate dealerships!!!!
     
  27. Sep 14, 2024 at 1:40 PM
    BS67

    BS67 8404 USMC Doc

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    6,124
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    I need to get a front camera! You came out great!
     
  28. Sep 14, 2024 at 1:41 PM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    2,721
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....

    I didn't pay a dime. The trucking company did. The office manager called SafeLite before I even arrived and paid the bill in cash.
     
  29. Sep 14, 2024 at 1:42 PM
    BS67

    BS67 8404 USMC Doc

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    6,124
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    Just finished the install of the Accessorides with takeover remote start. Works perfect! Just got done putting everything back together! No more shutting down when opening the door!
     
    vthoky, AppFan and LCJ77 like this.
  30. Sep 14, 2024 at 1:42 PM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    2,721
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....
    I had a Garmin Mini 2 in my Tacoma, and I have a FitCamx in my SloRunner. I like the FitCam much more. It looks OEM and records in 4k.
     
    Harringbr99 and BS67[QUOTED] like this.

Products Discussed in

To Top