1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Fire Extinguisher Spot

Discussion in 'General 4Runner Talk' started by Ratmosphere, Aug 8, 2023.

  1. Jan 24, 2024 at 5:37 AM
    #31
    BobbyB

    BobbyB Where the road ends, Fun begins!

    Joined:
    Nov 18, 2020
    Member:
    #17959
    Messages:
    320
    Gender:
    Male
    First Name:
    Bob
    Marietta, GA
    Vehicle:
    2021 White TRD Off Road
    SSO Slimline Bumper Warn Evo 10s winch Bilstein 5100 shocks Dobinson Springs (front and rear) JBA Upper Control Arms Baja Designs Squadron Pro Combo lights Diode Dynamics SS3 Pro Foglights RCI skids (engine, trans, Txfr and gas tank) CaliRaised sliders UpTop Overland Bravo Rack Auxbeam 6 switch panel Frac Harness with front camera Custom rear diff breather on firewall
    I have a 2 1/2 lb in front of the drivers seat and a 5 lb in the back.

    The front utilizes the mount that came with the extinguisher bolted to a Desert Does It mount panel that is attached to the seat jackets. The seat still has full forward / rearward movement.

    The rear utilizes the mount that came with it bolted to a home made bracket.

    IMG_3465.jpg

    IMG_3467.jpg

    Cheers,
    Bob
     
    TrailSpecial22 likes this.
  2. Jan 24, 2024 at 5:52 AM
    #32
    J.A.

    J.A. New Member

    Joined:
    Mar 11, 2019
    Member:
    #9138
    Messages:
    29
    Gender:
    Male
    NY
    Vehicle:
    2007 4Runner Sport 4WD V-8
    www.top4runners.com
    djwantke likes this.
  3. Jan 24, 2024 at 6:39 AM
    #33
    doublewide

    doublewide ShittCo

    Joined:
    May 29, 2018
    Member:
    #6133
    Messages:
    273
    Gender:
    Male
    First Name:
    Mark
    SoCal
    Vehicle:
    TRD OR PREM
    Question, why is it a "cool factor" to have the extinguisher mounted in front of my seat? Nobody really sees it. Myself, I think snorkels and Raptor lights are way more of a "cool factor" than fire safety...
     
    Last edited: Jan 24, 2024
    Trail Runnah likes this.
  4. Jan 24, 2024 at 6:40 AM
    #34
    doublewide

    doublewide ShittCo

    Joined:
    May 29, 2018
    Member:
    #6133
    Messages:
    273
    Gender:
    Male
    First Name:
    Mark
    SoCal
    Vehicle:
    TRD OR PREM
    It will go all the way up but does start to rub the top of the extinguisher as it nears the end of the forward travel.
     
    1SilverRunner[QUOTED] likes this.
  5. Jan 24, 2024 at 7:01 AM
    #35
    1SilverRunner

    1SilverRunner My boy, blue

    Joined:
    Jan 15, 2024
    Member:
    #37925
    Messages:
    1,187
    Gender:
    Male
    Tejas
    Vehicle:
    22 TRD Off Road Premium
    Front Bumper: C4 Fabrication Low-Profile Bumper Warn Evo10-S Winch w/ Warn wireless adapter Extreme LED dual color light bar w/ Cali raised LED OEM style switch Bumper Cover Trimmed For Clearance Rear Bumper: 80% Off Road Rear Bash Bar Armor: RCI Skid plate package C4 Gas tank skid RCI Rear diff skid RCI Shock Skids RSG Angled/ Plated Sliders Total Chaos Cam Tab Gussets Total Chaos Spindle Gussets 41.22 Hitch Slider Suspension: Dobinsons IMS long travel shocks: (Front: IMS59-50574 w/ C59-352 Springs) (Rear: IMS59-50575 w/ C59-675v Springs) Apex Chassis Tie Rod Assemblies (KIT410) Apache Off Road UCAs Apache Off Road HD Rear Links (Upper and Lower) Apache Off Road Rear Sway Bar Links Dobinsons Track Bar Front Sway Bar Delete DuroBumps Rear Bump stops PerryParts Front Bump stops DRKDSS Track Bar Correction kit Dobinsons Diff Drop Wheels/ Tires: RRW 17x8.5 -12 RR6-H Wheels 285/75/17 Falken A/T4W 1.25" SpiderTrax Spacers BMC, Pinch Weld Folded. C4 High Clearance Fender Liners Performance: OTT Tuned Scan Gauge II for Temp Monitoring Yota Shop Diff Breather Storage Solutions: LFD Cross-Bars Aiden James Customs Gear Plate w/ Slide Out Tables *Backordered. Rado Designs Molle storage panels and top shelf Glove Box organizer Center Console organizer Interior: Diode Dynamics LED Interior lighting (Warm white ftw) Meso Customs Hatch lights Meso Customs Door Handle Covers Ram ball mount for Garmin In-Touch Mini II FitCamX Dash Camera Scosche phone mount Weathertech floor matts Misc: Nano Ceramic Tint (Including windshield and sunroof) Midland MXT575 and Ghost Antenna Cali Raised LED 27W Ditch Lights OVS Nomadic 6.5' Awning AVS Low Profile Vent Visor AVS Bugflector II Diode Dynamic puddle lights LasFit Reverse lights LED license plate lights Ark Splash Guards Ark Mud Flap Deletes AJT Push-To-Start Button +Midland handheld GMRS radios, Baofeng UV-5R Ham radio, recovery gear, water purification system, lifeboat food rations, trauma kit, fire extinguisher and fire starting kit stay on board.
    Awesome! Sorry for all the questions but what fire extinguisher are you running?
    I will be jacking your setup xD
     
    djwantke and doublewide[QUOTED] like this.
  6. Jan 24, 2024 at 7:33 AM
    #36
    doublewide

    doublewide ShittCo

    Joined:
    May 29, 2018
    Member:
    #6133
    Messages:
    273
    Gender:
    Male
    First Name:
    Mark
    SoCal
    Vehicle:
    TRD OR PREM
    H3R Performance Max Out ABC Dry chemical
    :thumbsup:
     
  7. Jan 24, 2024 at 8:00 AM
    #37
    Jynarik

    Jynarik I like boobies

    Joined:
    Jul 10, 2019
    Member:
    #10510
    Messages:
    2,319
    Gender:
    Male
    Austin Texas
    Vehicle:
    2019 trd pro voodoo
    I don’t know. Us guys are weird. Some of us like to mount CB radios, have shit dangling all over the dash, put patches everywhere, molle panels in the front.
     
  8. Jan 24, 2024 at 2:22 PM
    #38
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    In Canada (previously the glorious and free before Turdeau)
    Garrison ABC Dry Chemical Rechargeable Fire Extinguisher With Wall Mounting Bracket, 2-lb, Red
    + black metal vehicle mount off Amazoné

    fire-extinguisher-1a5bc-2-lb-red-garrison-06ced9fb-cd9e-4120-80ec-f029b32d542c.png
     
  9. Jan 24, 2024 at 3:31 PM
    #39
    3JOH22A

    3JOH22A Toyota Gigolo

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,109
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    It's good for under-hood fires (most likely in a vehicle) when it first starts, that's why you want the quickest access.

    For camping I carry a second extinguisher loose with my gear, and put it close to the grill or camp fire (and close to the tent if I sleep with the propane heater running).
     
    nova likes this.
  10. Jan 24, 2024 at 3:54 PM
    #40
    3JOH22A

    3JOH22A Toyota Gigolo

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,109
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    What's the 2lb extinguisher's rating, 1A5BC? I went with a Kidde 2.5lb because it's 1A10BC. The canister is aluminum with no welds, as corrosion would otherwise be a concern in the footwell area.
     
    djwantke[QUOTED] likes this.
  11. Jan 24, 2024 at 4:17 PM
    #41
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    That's right 1A5BC
     
  12. Jan 24, 2024 at 4:18 PM
    #42
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    I asked for two for xmas.
    After feedback from the boys, sounds like need a second larger tank in the cargo trunk to actually put out a car fire (I'm not installing any in front of seat)
     
  13. Jan 24, 2024 at 5:14 PM
    #43
    Jynarik

    Jynarik I like boobies

    Joined:
    Jul 10, 2019
    Member:
    #10510
    Messages:
    2,319
    Gender:
    Male
    Austin Texas
    Vehicle:
    2019 trd pro voodoo
    respectfully, as a career firefighter, very few vehicle fires are going to be controlled with a fire extinguisher. If a vehicle spontaneously goes up in flames, you more than likely have fluid involved at a continuous flow.

    That said, I still carry an ABC extinguisher because absolutely anything can happen and it may make a difference, especially if it’s an off road/grass fire issue. But I’m just not giving up foot space for an extinguisher.

    Not to mention, I have other personal experience lol

    IMG_4180.jpg
     
  14. Jan 24, 2024 at 6:05 PM
    #44
    Stoney Ranger

    Stoney Ranger New Member

    Joined:
    Mar 19, 2021
    Member:
    #20419
    Messages:
    1,019
    Gender:
    Male
    Driftless Area
    Vehicle:
    '18 SR5 Nauti Blue
    4x Rockers/Skids-Dobi-275's-Fr/R Bpr-Winch-Stickers-ALF
    When I was a teenager in the '70's, my buddies engine caught fire in a McDonalds parking lot. Guy next door ran over with the smallest extinguisher I have ever seen. (The 2.5 lb I carry is a lot bigger) It did the job and we drove the car home. I have come to realize that most big fires started as little fires.
    To paraphrase, "If it saves only one, it was worth it".:D
     
    icebear likes this.
  15. Jan 24, 2024 at 6:14 PM
    #45
    3JOH22A

    3JOH22A Toyota Gigolo

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,109
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    Ah, the mobile version of this forum doesn't show service badges. Always welcome to hear from a professional :hattip:
     
  16. Jan 24, 2024 at 6:31 PM
    #46
    Jynarik

    Jynarik I like boobies

    Joined:
    Jul 10, 2019
    Member:
    #10510
    Messages:
    2,319
    Gender:
    Male
    Austin Texas
    Vehicle:
    2019 trd pro voodoo
    cars weren’t built with an engine compartment full of plastic and other combustibles in the 70’s.

    either way, doesn’t hurt to have one or use one.
     
    Last edited: Jan 24, 2024
  17. Jan 26, 2024 at 7:24 AM
    #47
    Kyblack76

    Kyblack76 New Member

    Joined:
    Jan 21, 2018
    Member:
    #5354
    Messages:
    1,143
    Gender:
    Male
    First Name:
    Kyle
    Layton, Utah
    Vehicle:
    18 TRD O.R
    This guy gets it.

    I'm not carrying it for a issue i may run into on MY rig, but, a side of the road thing I may come up to, or camp fire that gets outta hand, or buddies, doing "watch this" things. Its not in my rig to put my junk out. Just there for the other "oh shit" moments. That said, i do carry two, small, out of my way units. And , everyone i travel with knows where they are, and i consider that done/good. Same with my emergency pack. That takes up little space. It wont cure cancer, or heal the planet, but there in case a few of us go wheeling/shooting/spelunking, whatever, and something could do the trick. No more, no less. That said, in 2 decades of horsing around, neither have been grabbed. But, i also will make some simple, out of the way space, for the option.
     
  18. Jan 27, 2024 at 4:20 PM
    #48
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,429
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Whoa! What’s the story on that? That fender is aluminum I suppose?
     
  19. Jan 27, 2024 at 4:35 PM
    #49
    Jynarik

    Jynarik I like boobies

    Joined:
    Jul 10, 2019
    Member:
    #10510
    Messages:
    2,319
    Gender:
    Male
    Austin Texas
    Vehicle:
    2019 trd pro voodoo
    shit if I know. Doing 75 and notice smoke, pull off highway and it’s beyond gone by the time we got out of the truck. Probably something with the fuel system. Aluminum melts fast lol
     
    McSpazatron[QUOTED] likes this.
  20. Jul 7, 2024 at 4:58 AM
    #50
    LJrunner

    LJrunner New Member

    Joined:
    May 4, 2024
    Member:
    #40226
    Messages:
    8
    How did you mount/attach the CO2 tank bracket in back? Thanks.
     
  21. Jul 7, 2024 at 7:02 AM
    #51
    2ndGen22re

    2ndGen22re Goldie, my 1st love & my new kid…

    Joined:
    Mar 10, 2022
    Member:
    #26045
    Messages:
    997
    Gender:
    Male
    First Name:
    CR
    Carson Valley, NV
    Vehicle:
    1990 22RE & 22 AG ORP KDSS
    One-at-this-price stripper. Bought new 34 yrs ago, a $13K leftover. Added Detroit TruTrac, 1”rear spring spacer and “pinstripes”… Factory AC kit and roof rack bought at dealer cost at time of purchase, still blows ice cold 32yrs later. 2022 AG ORP all stock.
  22. Jul 7, 2024 at 1:46 PM
    #52
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,644
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    thoughts on summer heat effects on extinquisher on cargo area mounting?
     
  23. Jul 7, 2024 at 4:04 PM
    #53
    Jynarik

    Jynarik I like boobies

    Joined:
    Jul 10, 2019
    Member:
    #10510
    Messages:
    2,319
    Gender:
    Male
    Austin Texas
    Vehicle:
    2019 trd pro voodoo
    High temperatures aren’t an issue. Chemical is very stable.
    Inside of my vehicle is well over 100 degrees in Texas.
     
  24. Jul 8, 2024 at 7:30 AM
    #54
    Kyblack76

    Kyblack76 New Member

    Joined:
    Jan 21, 2018
    Member:
    #5354
    Messages:
    1,143
    Gender:
    Male
    First Name:
    Kyle
    Layton, Utah
    Vehicle:
    18 TRD O.R
    The bracket mounts to oem mounts, its from power tank. The tank, i pieced together myself. Cheers.
     

Products Discussed in

To Top