What have you done to your 5th Gen 4Runner today?

I’m talking about the receiver assembly , I didn’t previously have one, and no snow that’s gravel lol

 

Contact Chris (2016 4Runner SR5) about Cornfed leveling kits. He's a dealer and knows all you need to know about them.

 

I’m running them also, I like them a lot. 2 years and 21,000 mi. Great for on road and light off road use. They are not talked about much unfortunately.

 

What year is your 4runner? Wondering if my 2015 is still under warranty...Mine is peeling too

 

I hit 600 miles in 4 days of ownership, washed the truck, and finally tinted the front windows

 

Finally got the TSO Incog bumper and Ironman winch put on. I have to button up some things this weekend.

 

Did some things, installed Toyota’s sliders. Definitely not the best, but $191.00 ea. from Bam. Good enough for now, looks good. Added the victory 4x4 console molle panels



and finally installed my Midland Mxt 275 which I’ve had for 6 months! Just zip tied the mount to the molle and attached the radio.

haven't figured out yet where and how to mount the mic. But it sits there pretty good for now on top of the panel, just can’t see the display while driving. And I did the ghost antenna with the lip mount on the passenger side of the hood.

 

I have a 2020 ORP. I ordered a 2022 ORP in December and it is scheduled to arrive at the dealer on 6/3. When I bought the 2020, I anticipated owning it for years so I equipped it with everything I wanted on it. It was my first black vehicle … and my last. I love the truck but hate the color. The 2022 is white which is what I really wanted to begin with.

I have now started the process to return it to stock. I have removed all of the interior LED lights, the “Tail as Turn” tail lamp harnesses, the TRD Pro grill, and the step bars. I am having the dealer remove the lift kit. I still have to remove the “Brite Box” kit, the side mirror LED pods, sequential turn signals, and the cold air kit. I’ll leave the Pedal Commander for last since I just have to unplug it.

Once the 2022 gets here, I get to start the reinstalling process. It’s going to be a fun summer.

 

Got my Eibach 2.0 coilover kit installed along with JBA control arms. On the schedule for next week is getting my wheels/tires on along with an alignment. Going to wait and see how settles and may adjust the front down a hair, I want to keep a little rake and right now its pretty darn level. Looks goofy right now to me with this lift on the stock wheel/tire combo!

 

Mine is a 2018, and I had mine done before the warranty expired.

 

looks good ! What wheels are those ????

 

Summit Dakars. They are 17x9 w/ -25 offset.

 

Paid off the bank note.

 

Winch arrived this afternoon.
Also a license plate adapter cause you know Virginia.
Info:
STEGODON New 9500 lb. Load Capacity
Electric Winch S3,12V Waterproof IP67 with Hawse Fairlead
Synthetic Rope with Wireless Handheld Remote and Wired Handle

 

Got a killer deal on this diode dynamics light bar. Didn’t know where to put it and wasn’t going to pay $100 bucks for “stealth mount brackets”

rigged it up with stock mounts no problem

 

Installed the ajc birds eye camera kit. Fit and finish was perfect wire legth ect. About a 20 min job all in the hatch if anyones looking to relocate a camera I don’t think you can beat it

 

Also got my ham technician, anyone have and recommendations on a decent tri band mobile setup?

 

Like, but Man that crooked flatlink Is killing my ocd lol.

 

lmao I’ve been too lazy to pull out the remote I look at it and think the same

 

I have these as well. I like them they are plenty bright

 

Gave it a wash and through interior cleaning. Looks much better now.

 

Installed Dobinson's Springs/Shocks and JBA's UCA's. The ride is much better than stock.

 

Washed the Green Behemoth today and finally got my Victory 4x4 Sliders installed today. Now to just get my skid plates installed.

 

While distracted, backed up into an offroad cliff wall on a single-vehicle lane police were blocking during a vehicle recovery, and damaged the rear door handle, quarter panel, and taillight housing on the passenger side. Today, thinking a simple push from inside would pop the quarter panel back outward, I disassembled the built and began pushing from inside outward, not knowing what I was doing. While not a great result better than it was. While the damage is not desired not too disappointing as this type of damage was expected when the vehicle was purchased for Overlanding first and a daily drive second. That aside, disassembling the built took the longest, way too long, not to mention now it all has to go back for the third time after repairs to the vehicle. On the positive side, putting it back together provides the opportunity for a few tweaks to the built. Simpler, fingers crossed, was the taillight replacement (https://www.uniquestyleracingstore....ade-to-2014-style-tail-lights-tlty4run10leds2). While way at the bottom, these chrome canceling lights were on the to-do list thus the opportunity to replacement due to the damage was justifiable. Nonetheless, they look better, and the added reverse light upgrade is a noticeable improvement as well. Later, when time allows, finish the DIY bodywork with some touch-up paint, I guess.

 

I hate comin up on a big washout, side hoop on the bumper and kickout on the sliders are the only thing that saved my whole side lol

 

Little campin

 

I got some 285s mounted. Pulled the mud flaps and trimmed the front bumper ahead of the install. So far, no rubbing!

 

I had a YotaWerx tune flashed today (@mZiggy). I only have about 60 highway miles on it, so I'll have to update my experience later. It already feels like an improvement.

 

Did you happen to try a suction cup? I've gotten some pretty good size dents out of other vehicles using a heavy duty suction cup (think windshield replacement or glass handling) and warming up the panel to help the paint keep from cracking. Put the suction cup on there and pull it out! I hope I don't ever have to pull apart the interior like that, what a pain!

 

Gave the wife’s Runner a much needed bath and full detail today !!