What have you done to your 5th Gen 4Runner today?

There’s a big thread on the other forum, sorry I can’t copy n paste the link

google:
t4r cheap $5 easy mod 5th gen sensor

First result n your set

 

Her is a side profile:


The last one is a straight profile shot with the alignment being the rear and front fender flare.

 

Yep, ebay has that sensor for cheaper price than the Amazon one I have in the video.

 

I don't think this mod works with SR5's. Could be mistaken, but that's what I seem to remember.

 

Pop that blank sensor and see if you have the wire. I have a feeling Toyota might have it across all for easiness of parts instal. If you have the wires you are good. I see ebay have the light sensor for about 8 bucks.

 

I was just reading that in another forum

Already ordered it for $6 off AlliXpress so if it doesn't work I'll pass the sensor on to someone that can use it...

 

If I'm not mistaken, a lot of SR5 owners still have the wire but when they plug it in, it doesn't work.

Been a while since I read that thread, so I might be wrong.......but that's what I seem to remember.

 

This is a free mod I thought just roll the dimmer up until it clicks. It should change everything but the clock to regular brightness

 

Exactly what I do.

 

Does this look good or is it dumb lol

 

It's different. I kinda like it. The only thing that really matters is that you like it though.

 

Finally installed one of my showers the other day
Anyone who has built one, I have a pressure relief valve where the faucet is(left)...no leaks anywhere but where I fill the tank with water/air(right) water bubbles come out(this is a screw in cap)I only go to 20psi
Do I need to overkill tightening the threaded fill cap? Is there too much water? Does my valve need to be open? My gauge goes down to zero but when I open my valve a lot of air/water is pushed through
Any ideas?


took off sliders to clean/paint
Going from silvergreyish to some sort of black...biting the john wick batman bullet I guess

 

I dig it
I've got chameleon plastidip on mine....pending on light n angle it's goes from pink purple to silver to light teal green
I'll get a pic later

Still trying to find someone to fab me custom letters to replace 4Runner n also something for my blank grill

Here's kinda the pink

 

Did this today

 

Now go out and get it dirty again.

 

This is what I do. It’s free

 

Damn looks like new

 

I kinda like the green. I’m doing a few things in neon green on my 4Runner to match my dive gear.

 

I’m digging it. Just picked up some fittings the other day to build one myself

 

Appreciate the pics! Looks like a good amount of poke aleady with -12.

 

Like it and been messing around the idea of painting all of the emblems red...

 

Amazing

 

Yeah I was contemplating the bigger offset and now I am glad I didn’t go that far out. It would have been way too much for me.

 

No, it doesn't look dumb, lots of engineers go to Purdue....

JK!!!!..., bad as$ engineering program for sure, and an all around great school. Just had to throw it out there, since everyone else missed it. I thought maybe you were a golden domer going green.., but the look is good. Not something you see, and you know it is yours!

Good stuff! Go Boilermakers!

 

Flash flood warning, new tires, gotta get them out there to test how they perform in the rain. Needless to say I couldn’t find any major puddles and didn’t want to be out more than 30 minutes. Good drain system where I am at I guess. So instead I took pictures of the 4Runner out in the rain.

 

Good looking rig

 

Thanks

 

Thank you

 

Got this Nfab grill light mount from @RusPro17 and finally installed it with some KC lights.


Then added these flag magnets from tactilian


Also did some off roading earlier in the week but didn't really get good pics. These things have less ground clearance than I thought they had, but a lift should fix that.

 

damn! looks amazing. what did you use?