My 2022 T4R

Well I fudged up. Ordered h11 HP48 bulbs instead of 9005....to be continued.

 

Still waiting on my bulbs to be delivered. ETA was Friday..oh well.

I have an extra harness if anyone wants it let me know. Made the ground wire a little long. Easier to work with and I'd hate to ship one out and have it be too short.

 

Sent you a DM

 

Hey, have these stood the test of time so far?

 

I ended up building one and have a spare setup to get rid of if anyone is interested. Seems like $20 shipped seems fair here so pm me if interested. I used solder shrink wrap in picture and then the complete wire also in photo.

 

Just completed this mod and it came out great after getting the correct bulbs. I have an extra soldered and heat shrunk harness if anyone is in need. Asking for the standard $20. PM me if interested.

 

Very interested in this mod. Anyone have a link sourcing the blue connectors? TIA

 

Blue:

$8 iJDMTOY OEM 9005 HB3 H10 9145 Female Adapters Wiring Harness Sockets w/ 4" Wire Pigtails Compatible with Acura/Honda High/Low Beam or Fog Lights Use (04321-SH3-305)

https://www.amazon.com/gp/product/B07MJHYY6N?smid=A1LGDXCZMXB2CW
Black:

$7 iJDMTOY 9005 HB3 9145 H10 9006 HB4 Extension Wiring Harness Sockets Wires Compatible with High/Low Beam or Fog Lights Use

https://www.amazon.com/gp/product/B008E00TKY?ie=UTF8

 

Not to beat a dead horse here but I can only get one side to light up? I've looked at hundreds of pictures of the harness and mine is built the same way, yet only one side lights up, the other side will not light. I'm able to get the drivers side working if I have the oem halogen bulb in the passenger side, but it wont light. Any ideas?

 

I'll take a harness if any are available

 

I built 2 and gave one to a friend. My friend found this one online. He got away cheap lunch!

https://fbchs.square.site/product/4runner-2022-current-drl-harness/40

 

Thanks. I just ordered one from the link. Also ordered these bulbs:

 

Couple of tips…

buy one of these in 10mm


Remove the black plastic cover for better access to the ground location. It just snaps on…no screws to remove.
These 2 tidbits will save you frustration and bloody knuckles!

 

Did anyone has a extra harness available?

 

Grounded in the front instead

 

do you still have the harness available??

 

New member here. Does anyone have an extra harness they'd be willing to sell. Also, any input on which LED DRL lights to buy? Also need info on the front/rear turn signal LED light replacements for the factory incandescent bulbs. Thank you in advance!

 

HI, does this work for 2015 4runner as well? Or has to be 20' and up?

 

2021+ for Limited and Pro. 2022+ for all other trims

 

Hey....me too! This was my last old BMW.....of 7 I believe it was. Bought it when it was 3 years old in 2004 and finally sold it in 2018.

TimG

 

Having the same issue on my ‘24 TRD Pro: driver’s side HP48 lights up with harness mod on passenger side, but passenger side does not illuminate. Were you able to solve this?

 

Check your connections. Specially your ground. If you wired them like the pic below. They will work. Unless your other hp48 is faulty.

 

Thank you. Harness was correct; it was the ground (the bolt securing the high side AC line was not a good ground).

 

I’m glad you got it working!

 

Hi EmacTR4 & all other Members! I had just built the Harness by following all the steps & instructions on the very 1st Page. I had also grounded the Neg Cable to the Location as showed on picture. Unfortunately, when turning ON DRL Lights, only Passenger Side lightup & Driver's Side will not. Swapping the Bulbs & still the same issue. Please, note that Bulb Connectors which I had bought on Amazon is slightly different in color compared to yours so that connecting Green Wire to Black/Red Wires on the Socket & Pink to Black/Ground Wire. Any advices or if I had done something wrong? Attached is the picture of the Harness & also the Ground Location which I used to ground. Thanks so much for helping & have a great weekend.

 

Mine is 2022 4Runner Limited & as seen other Members had issues with Passenger's Side due to Ground while I have Driver's Side issue, don't really know what had I done wrong? Thanks again

 

Could you open up the harness and post another picture of it.

 

Hi emacTR4! Here is the Harness Connection! Thanks for helping

 

The bulbs you are using are probably polarity sensitive. Interchange the connection. Connect shorted black connector to the pink wire and the ground to the green. Make sure it’s properly grounded. Sand the paint a little bit. This will likely solve it.

 

Hmmmm! assuming your suggestion will work, then why? I am not an expert on Electrical but this is just a DC Circuit (simple to understand & why Pink Wire on Blue must be wired to Black/Red Wires on Socket to make it work?) & if it is working as the way you suggested, then really have no clue, . The Bulbs I am using are the same as you & other Members suggested. TIA. BTW, regardless Wires on Connector in different colors as I am following all steps & compared to the Pics those you had posted on 1st Page. Should 22 Limited Version be different from other Models? Seeing many Members had successfully Mod & it is worked for them! Thanks again emacTR4!

Here are some Pics of Original Socket/Connector Connections with Hologen Bulbs! Thanks emacTR4