1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

TRD Pro vs Off road with KDSS

Discussion in '5th Gen 4Runners (2010-2024)' started by kane22, Jan 15, 2024.

  1. Jan 19, 2024 at 12:45 PM
    #31
    kane22

    kane22 [OP] New Member

    Joined:
    Jan 15, 2024
    Member:
    #37922
    Messages:
    55
    Gender:
    Male
    When I say "don't do anything crazy with it" I mean I'm not trying to build a rock crawler, or drive through 6 feet deep mud holes. I do want the most capability I can get with a factory warranty. A foot of snow is not uncommon, some tight, steep, slippery, old logging roads, stuff like that.
     
    DirtyHairy likes this.
  2. Jan 19, 2024 at 12:45 PM
    #32
    kane22

    kane22 [OP] New Member

    Joined:
    Jan 15, 2024
    Member:
    #37922
    Messages:
    55
    Gender:
    Male
    No rear locker is a deal breaker for me.
     
  3. Jan 19, 2024 at 1:47 PM
    #33
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,229
    Gender:
    Male
    Can add both front and rear lockers to SR5 from a good shop. Then you can engage or disengage at anytime. From factory you can only do in 4L.
     
    Thatbassguy and Old Tanker like this.
  4. Jan 19, 2024 at 2:08 PM
    #34
    Yobruhitsme

    Yobruhitsme New Member

    Joined:
    Nov 17, 2023
    Member:
    #36773
    Messages:
    969
    Gender:
    Male
    Denver
    Vehicle:
    Ineos Grenadier
    For what you described above, trd pro offers nothing that is beneficial over ORP + kdss.

    the lack of kdss actually makes driving on those tight logging roads worse, due to body lean
     
    CalcityRenegade likes this.
  5. Jan 19, 2024 at 2:57 PM
    #35
    CalcityRenegade

    CalcityRenegade New Member

    Joined:
    Feb 14, 2023
    Member:
    #31252
    Messages:
    637
    First Name:
    Matt
    Calgary, Alberta, Canada, Earth
    Vehicle:
    2023 T4R ORP KDSS
    I do not know about the US, but the Pro is an immediate $12k jump here in Canada. You could use that to build a pretty damn nice 4Runner, and the way you want it with that $12k. TRD Pro wheels are only 7" wide so not ideal if going to larger tires and the stock tires are not that great either. You could likely build a better 4Runner for half the price of going with the Pro.
     
  6. Jan 19, 2024 at 3:07 PM
    #36
    kane22

    kane22 [OP] New Member

    Joined:
    Jan 15, 2024
    Member:
    #37922
    Messages:
    55
    Gender:
    Male
    I don't disagree. They one local dealer has two on the way with KDSS. The bad thing is they have so much extra crap they're only 3k less than a pro. Add in tires and I'm down to 2k difference.
     
    Mtnmonkey likes this.
  7. Jan 19, 2024 at 3:10 PM
    #37
    kane22

    kane22 [OP] New Member

    Joined:
    Jan 15, 2024
    Member:
    #37922
    Messages:
    55
    Gender:
    Male
    They won't move off MSRP for a pro, but it's not anywhere close to a 12k jump.
     
    Newfy and Mtnmonkey like this.
  8. Jan 19, 2024 at 3:22 PM
    #38
    CalcityRenegade

    CalcityRenegade New Member

    Joined:
    Feb 14, 2023
    Member:
    #31252
    Messages:
    637
    First Name:
    Matt
    Calgary, Alberta, Canada, Earth
    Vehicle:
    2023 T4R ORP KDSS
    Much larger price gap up here, but still $8,040 more for the US. That is still a lot of money you could use for upgrades.

    Pro .jpg
     
    DirtyHairy and kmeeg like this.
  9. Jan 19, 2024 at 3:49 PM
    #39
    kane22

    kane22 [OP] New Member

    Joined:
    Jan 15, 2024
    Member:
    #37922
    Messages:
    55
    Gender:
    Male
    Except you can't find a ORP for $47,130. I've been looking but they're all in the low 50's around here
     
    Mtnmonkey likes this.
  10. Jan 19, 2024 at 3:52 PM
    #40
    backpacker

    backpacker New Member

    Joined:
    Apr 22, 2023
    Member:
    #32515
    Messages:
    2,187
    Gender:
    Male
    Vehicle:
    2023 TRD ORP
    RSG sliders, Falken Wildpeak 265/70R/17 E
    That's $12k Canadian.
     
  11. Jan 19, 2024 at 4:25 PM
    #41
    Yobruhitsme

    Yobruhitsme New Member

    Joined:
    Nov 17, 2023
    Member:
    #36773
    Messages:
    969
    Gender:
    Male
    Denver
    Vehicle:
    Ineos Grenadier
    What market? Buy out of state for $5k off msrp?
     
  12. Jan 19, 2024 at 4:39 PM
    #42
    DrewMan

    DrewMan 2016 4RTP-KDSS

    Joined:
    Mar 19, 2017
    Member:
    #3731
    Messages:
    396
    Gender:
    Male
    Middle Tennessee
    Vehicle:
    2016 Magnetic Grey 4Runner Trail Premium
    Bilstein 5100 Series Shocks, Daystar 1.5" Rear Coil Spacer (Mid Left), Level 8 Tracker Pros 17x9, 275/70/R17 B.F. Goodrich TKO's, N-Fab Nerf Steps
    save yourself some money and do small upgrades that you want, like and do yourself; I still love my 2016-4RTP w/ KDSS along with Bilstein 5100’s all around.
    Just turn 87,000 miles on it!

    IMG_0471.jpg
     
    Mlbdriver and josean99 like this.
  13. Jan 19, 2024 at 5:39 PM
    #43
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    6,635
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    Nice wheels!
     
    DrewMan[QUOTED] likes this.
  14. Jan 19, 2024 at 6:20 PM
    #44
    Redwood

    Redwood New Member

    Joined:
    Oct 11, 2021
    Member:
    #23750
    Messages:
    242
    Gender:
    Male
    Vehicle:
    2022 4Runner TRD Off Road
    Yes it is price wise. But since our Canadian ORPs (at least my '22) come standard with things like auto headlights and high beams, factory remote start, dual zone climate, heated seats and Kdss I didn't even consider the Pro. Just not worth the extra bucks for a name and argueably superior all round stock performance. Not bashing the Pro crowd but ORPs here are a much better bang for your buck.
     
  15. Jan 19, 2024 at 6:51 PM
    #45
    Jcberb

    Jcberb New Member

    Joined:
    Dec 3, 2023
    Member:
    #37064
    Messages:
    9
    First Name:
    Joel
    New guy here, got an ORP after a while of debating. Once I realized there was not much of a difference between pro and ORP I went with the ORP. The Pros were going for 55+k while a boring white ORP was $47k.
     
  16. Jan 19, 2024 at 6:58 PM
    #46
    semprenissart

    semprenissart Mèfi

    Joined:
    Dec 22, 2021
    Member:
    #24758
    Messages:
    879
    Arizona
    Vehicle:
    2022 4Runner TRD Pro (MGM)
    Westcott Sliders. Gobi no rise
    Kdss is not good on dirt roads at faster speeds. Too stiff. If anything you would want to disable kdss in these instances (great mod from dr kdss). Pro suspensions are more or less designed for that.

    kdss is great on pavement to reduce body lean like you said. Or at very slow speed off road, it gives ever so slightly more articulation on a stock set up
     
    Last edited: Jan 20, 2024
    Mtnmonkey and djwantke like this.
  17. Jan 19, 2024 at 7:07 PM
    #47
    semprenissart

    semprenissart Mèfi

    Joined:
    Dec 22, 2021
    Member:
    #24758
    Messages:
    879
    Arizona
    Vehicle:
    2022 4Runner TRD Pro (MGM)
    Westcott Sliders. Gobi no rise
    Fully loaded ORP with kdss is near $52k. That’s very close to the price of the pro. If you add better tires, wheels, and suspensions you’re essentially there if not more assuming that you pay a shop for the install.

    if you want to stay stock I say the pro is a better deal. If you want a fully loaded truck and put better suspensions, tires, etc… then ORP is the way to go
     
    Newfy and Mtnmonkey like this.
  18. Jan 19, 2024 at 7:08 PM
    #48
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,498
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
  19. Jan 19, 2024 at 7:18 PM
    #49
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,498
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    hey don't be callin' ORP's cheap and dumb LOL they're glorious.
    jk

    quite the conundrum on your hands.
    I actually would choose SR5 Premium
     
  20. Jan 19, 2024 at 7:20 PM
    #50
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,498
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    I have Trail w/ Dr. KDSS swaybar kill switch.
    If you don't like a lot of fluff and tech, it's a better setup than PRO imo
     
  21. Jan 20, 2024 at 2:38 AM
    #51
    kane22

    kane22 [OP] New Member

    Joined:
    Jan 15, 2024
    Member:
    #37922
    Messages:
    55
    Gender:
    Male
    some real numbers for you guys
    the cheapest ORP with KDSS is $51,639
    the PRO is $57,128
    now I'll have to figure out the cost of upgrades I would want on the OPR. the PRO would stay stock
     
    Mtnmonkey likes this.
  22. Jan 20, 2024 at 6:36 AM
    #52
    Yobruhitsme

    Yobruhitsme New Member

    Joined:
    Nov 17, 2023
    Member:
    #36773
    Messages:
    969
    Gender:
    Male
    Denver
    Vehicle:
    Ineos Grenadier
    Do you know that trd pro specific parts are also installed at the u.s. port? So they don’t even come out of the tahara factory like that.. don’t want some hack job conducted the u.s port.

    “ the Pro Model - the suspension, wheels, and roof rack are port installed. All other models are put together in Japan.”
     
    kmeeg likes this.
  23. Jan 20, 2024 at 6:44 AM
    #53
    semprenissart

    semprenissart Mèfi

    Joined:
    Dec 22, 2021
    Member:
    #24758
    Messages:
    879
    Arizona
    Vehicle:
    2022 4Runner TRD Pro (MGM)
    Westcott Sliders. Gobi no rise
    the engine is what's important, and that's built in Japan. The rest doesnt matter, it's not rocket science and whether it's done at port or at discount tires. If you get new suspensions, wheels, and tires on an ORP it's also done in the US, not in Japan. If anything, with the Pro you still get all the work under warranty.

    Also toyota techs that install these at port are still better than the ones at the dealership that will do the oil change
     
    Han4Run, Newfy and Mtnmonkey like this.
  24. Jan 20, 2024 at 6:51 AM
    #54
    Yobruhitsme

    Yobruhitsme New Member

    Joined:
    Nov 17, 2023
    Member:
    #36773
    Messages:
    969
    Gender:
    Male
    Denver
    Vehicle:
    Ineos Grenadier
    Well obviously the other stuff are still built in japan. I am talking about relative to an ORP. All the bits you are paying for are just us installed stuff.. no built in japan premium even. So what are we even doing? May as well just buy the wheel from discount tire
     
  25. Jan 20, 2024 at 7:09 AM
    #55
    Yobruhitsme

    Yobruhitsme New Member

    Joined:
    Nov 17, 2023
    Member:
    #36773
    Messages:
    969
    Gender:
    Male
    Denver
    Vehicle:
    Ineos Grenadier
    What market?

    1 mo ago, got my $50k ORP for $46k. No additional dealer add on extras. Pros were being sold at msrp or with additional dealer add ons. So yeah $10k premium
     
  26. Jan 20, 2024 at 7:55 AM
    #56
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,229
    Gender:
    Male
    I'd be interested to know if fox shocks, TRD Pro roof rack, TRD skid, TRD Pro wheels, etc made in Japan? I'm thinking it's USA. Especially the shocks since Fox making for Tacoma and Tundra as well? I'm thinking same story for wheels. Not sure..

    With my personal experience I know TRD Pro specific parts are not quality as Japan made TRD ORP. Again, just my experience. Maybe just my TRD Pro is off quality on things like wheel balance, alignment, roof rack crossbar tightness,.....
     
    djwantke likes this.
  27. Jan 20, 2024 at 8:21 AM
    #57
    semprenissart

    semprenissart Mèfi

    Joined:
    Dec 22, 2021
    Member:
    #24758
    Messages:
    879
    Arizona
    Vehicle:
    2022 4Runner TRD Pro (MGM)
    Westcott Sliders. Gobi no rise
    what I meant was that the "not built in Japan, so it's shit quality" is really meant for the engine and the DNA of the truck.
    Not for aftermarket parts whether you buy them from Toyota or another store in the US.
    If you're leaving the truck stock whether its a limited, ORP, or SR5, then sure you could argue that everything comes from Japan but it doesnt really make any difference in terms of quality as these parts are not known to fail just because they were installed at port in the US. If anything, how many suspensions from the TRD Pro have failed compared to XREAS or insanely expensive repairs for KDSS if not properly maintained? And for anyone that is getting aftermarket suspensions in the US, then they are in the same boat as the TRD Pro in terms of "made in Japan" but dont get the factory warranty backed up by Toyota
     
    Last edited: Jan 20, 2024
  28. Jan 20, 2024 at 8:25 AM
    #58
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    2,546
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....

    I'm willing to bet that those products are made in America, then shipped to Japan to be INSTALLED on the factory floor during assembly.
     
  29. Jan 20, 2024 at 8:30 AM
    #59
    semprenissart

    semprenissart Mèfi

    Joined:
    Dec 22, 2021
    Member:
    #24758
    Messages:
    879
    Arizona
    Vehicle:
    2022 4Runner TRD Pro (MGM)
    Westcott Sliders. Gobi no rise
    no they are installed in the US

    https://www.youtube.com/watch?v=pitTQ-ye24A

    edit: not sure about the shocks
     
    Last edited: Jan 20, 2024
    Thatbassguy likes this.
  30. Jan 20, 2024 at 8:32 AM
    #60
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,229
    Gender:
    Male
    At US port-
    Screenshot_20221216_093934.jpg upload_2022-12-16_9-23-56.jpg upload_2022-12-16_9-36-7.jpg upload_2022-12-16_9-36-8.jpg
     
    Thatbassguy likes this.

Products Discussed in

To Top