1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Aug 30, 2023 at 5:38 PM
    gfd37-3

    gfd37-3 New Member

    Joined:
    Aug 7, 2023
    Member:
    #34720
    Messages:
    5
    Gender:
    Male
    Middle Tennessee
    Vehicle:
    2015 4Runner Limited
    white with blackout chrome, powder coat black wheels
    After 4 months as of today I no longer have any chrome on my 2015 Limited.
    upload_2023-8-30_19-34-44.jpg
     
    Wawa 4runner, 5six, ValK83 and 10 others like this.
  2. Aug 30, 2023 at 5:41 PM
    Lc200

    Lc200 New Member

    Joined:
    Jun 16, 2023
    Member:
    #33430
    Messages:
    892
    Gender:
    Male
    Vehicle:
    Pre Facelift SR5P
    Did you plastidip, vinyl wrap or paint the bumper chrome trims?
     
  3. Aug 30, 2023 at 5:42 PM
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    3,337
    Olympia, WA
    What do those have anything to do with interior space? Looks like you want less weight, more power, and more towing capacity. An Aluminum Diesel Gladiator, with more power, and more towing capacity is right for you. Yes, Jeep bodies are made of Aluminum now. You like Aluminum?
     
  4. Aug 30, 2023 at 5:45 PM
    FN2187

    FN2187 Stormtrooper

    Joined:
    Jul 6, 2022
    Member:
    #27707
    Messages:
    1,554
    Earth
    Vehicle:
    2019 TRD ORP w/ KDSS
    Victory 4x4 Blitz front bumper Smittybilt 10k Synthetic Gobi Stealth no-rise RCI sliders Rago panels and shelf, dash mount RCI Alu skids Dobinsons 2.5/1.5 285/70 Cooper Discoverer Rugged Trek SSO Hitch Mounted Swingout Anytime Front/Rear Camera
    I'd like aluminum. Light weight and doesn't corrode as easily. Would be great if a fully boxed aluminum frame could have the same strength as steel - 4runners may very well be indestructible.

    But at the risk of hijacking this thread to discuss it, let's start a new one. Lots of thread hijacking for the sake of arguing lately (I'm guilty as well)
     
  5. Aug 30, 2023 at 5:49 PM
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    3,337
    Olympia, WA
    No I don't like Aluminum. I didn't pay 50 grand to get Aluminum. And I didn't pay 50 grand to get a Corolla engine like you find in the new Wranglers either.
    You should seriiusly trade in your 5th gen, you don't seem happy with it. Give to someone who will appreciate it
     
    gomiami likes this.
  6. Aug 30, 2023 at 5:51 PM
    gfd37-3

    gfd37-3 New Member

    Joined:
    Aug 7, 2023
    Member:
    #34720
    Messages:
    5
    Gender:
    Male
    Middle Tennessee
    Vehicle:
    2015 4Runner Limited
    white with blackout chrome, powder coat black wheels
    I bought black bumper cover overlays from cartrim.com
     
    Lc200[QUOTED] likes this.
  7. Aug 30, 2023 at 5:56 PM
    FN2187

    FN2187 Stormtrooper

    Joined:
    Jul 6, 2022
    Member:
    #27707
    Messages:
    1,554
    Earth
    Vehicle:
    2019 TRD ORP w/ KDSS
    Victory 4x4 Blitz front bumper Smittybilt 10k Synthetic Gobi Stealth no-rise RCI sliders Rago panels and shelf, dash mount RCI Alu skids Dobinsons 2.5/1.5 285/70 Cooper Discoverer Rugged Trek SSO Hitch Mounted Swingout Anytime Front/Rear Camera
    What do you think of their fit and finish? I always thought of them as being just another cheap Chinese junk factory but I got a matte black rear bumper valance from them and I'm happy with it. Fit was about as close as I expected for an aftermarket part where there are probably some shape variations vehicle to vehicle to what it had to mount to
     
  8. Aug 30, 2023 at 6:07 PM
    gfd37-3

    gfd37-3 New Member

    Joined:
    Aug 7, 2023
    Member:
    #34720
    Messages:
    5
    Gender:
    Male
    Middle Tennessee
    Vehicle:
    2015 4Runner Limited
    white with blackout chrome, powder coat black wheels
    There pretty good, I only wish I had wrapped over the joints in the bumper. At just the right angle you can see a trace of chrome IMG_4500.jpg
     
    ColeRunner, Rocko9999 and Dabigono like this.
  9. Aug 30, 2023 at 6:12 PM
    FN2187

    FN2187 Stormtrooper

    Joined:
    Jul 6, 2022
    Member:
    #27707
    Messages:
    1,554
    Earth
    Vehicle:
    2019 TRD ORP w/ KDSS
    Victory 4x4 Blitz front bumper Smittybilt 10k Synthetic Gobi Stealth no-rise RCI sliders Rago panels and shelf, dash mount RCI Alu skids Dobinsons 2.5/1.5 285/70 Cooper Discoverer Rugged Trek SSO Hitch Mounted Swingout Anytime Front/Rear Camera
    Sounds like a job for the almighty sharpie pen!
     
  10. Aug 30, 2023 at 6:16 PM
    gfd37-3

    gfd37-3 New Member

    Joined:
    Aug 7, 2023
    Member:
    #34720
    Messages:
    5
    Gender:
    Male
    Middle Tennessee
    Vehicle:
    2015 4Runner Limited
    white with blackout chrome, powder coat black wheels
    That’s an idea! I thought about lifting the overlays on the joints and going at it with electrical tape
     
  11. Aug 30, 2023 at 6:20 PM
    FN2187

    FN2187 Stormtrooper

    Joined:
    Jul 6, 2022
    Member:
    #27707
    Messages:
    1,554
    Earth
    Vehicle:
    2019 TRD ORP w/ KDSS
    Victory 4x4 Blitz front bumper Smittybilt 10k Synthetic Gobi Stealth no-rise RCI sliders Rago panels and shelf, dash mount RCI Alu skids Dobinsons 2.5/1.5 285/70 Cooper Discoverer Rugged Trek SSO Hitch Mounted Swingout Anytime Front/Rear Camera
    I used to work in manufacturing - you'd be amazed what a sharpie, other color match permanent marker, or wax stick can cover up. Most of our stuff sat inside though, not sure how well marker would hold up to the elements
     
  12. Aug 30, 2023 at 6:33 PM
    RedRunner87

    RedRunner87 Mall Crawler LVL Expert

    Joined:
    Feb 18, 2016
    Member:
    #1586
    Messages:
    1,024
    Gender:
    Male
    First Name:
    Vince
    The Springs, CO
    Vehicle:
    16 4Runner SR5
    All I can say, is that I had have 2 leaking shocks in 35 miles. Both my rear shocks look like absolute trash at 35k miles. My OEM shocks looked much better after 100K miles on them.
     
    kmeeg[QUOTED] likes this.
  13. Aug 30, 2023 at 6:35 PM
    RedRunner87

    RedRunner87 Mall Crawler LVL Expert

    Joined:
    Feb 18, 2016
    Member:
    #1586
    Messages:
    1,024
    Gender:
    Male
    First Name:
    Vince
    The Springs, CO
    Vehicle:
    16 4Runner SR5
    redbeard_tx, Dabigono and kmeeg like this.
  14. Aug 30, 2023 at 6:41 PM
    Jynarik

    Jynarik I like boobies

    Joined:
    Jul 10, 2019
    Member:
    #10510
    Messages:
    2,324
    Gender:
    Male
    Austin Texas
    Vehicle:
    2019 trd pro voodoo
    you sound like you’re a bitter 70 year old Vietnam vet.
     
    NEguy likes this.
  15. Aug 30, 2023 at 9:30 PM
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    3,337
    Olympia, WA
    I am in my late 40s lol
     
  16. Aug 31, 2023 at 6:00 AM
    Charlievee

    Charlievee New Member

    Joined:
    Dec 20, 2018
    Member:
    #8149
    Messages:
    1,357
    If you quarter them, you can stack more..:D.
     
    nimby and icestud like this.
  17. Aug 31, 2023 at 11:48 AM
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    547
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
    Spent my inheritance on a new windshield on Tuesday. If there is ONE thing I don't like about the newer Yoders, is this TSS system. It's a PITA. Seriously. Not a fan of it. But it is what it is. But new windshield is in.

    20230831_110712.jpg
     
    gomiami, ColeRunner, Yazzman and 2 others like this.
  18. Aug 31, 2023 at 12:42 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,506
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Hah! Nice bro, look at that baby shine. Nice ditch lights too.

    @broken-giver I rest my case ↑ :p
     
  19. Aug 31, 2023 at 12:46 PM
    broken-giver

    broken-giver BFD

    Joined:
    Apr 14, 2023
    Member:
    #32346
    Messages:
    999
    Gender:
    Male
    I have NEVER paid for a windshield. I have ALWAYS had insurance policy that allows full replacement of windshield once per year. Even if there is a single small imperfection they are always happy to do it. I find it bizarre that 1. @playdixie had to spend inheritance on it and 2. you think an outlier makes your case.

    Still waiting for you to go about why 2020+ are made of glass and anything before that is made of titanium.
     
  20. Aug 31, 2023 at 12:57 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,506
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    @broken-giver I hear ya, I understand. I mean not everyone lives wherever you live. In British Columbia, ICBC has a monopoly and bends you over for everything.
    What I can say, is you're gunna be waiting a long time to get any more of an answer out of me, than the simple answer I already said to you.
     
  21. Aug 31, 2023 at 1:01 PM
    PrettyGoodSam

    PrettyGoodSam New Member

    Joined:
    Aug 23, 2018
    Member:
    #6853
    Messages:
    802
    Gender:
    Male
    Philadelphia
    Vehicle:
    2012 4Runner Trail
    put my car in for inspection and the guy just called me with a $4000 estimate on a mess of stuff. rear trailing arms, front lower control arms, rear shocks, front struts, front and rear sway bar links...this sucks. i mean i know its a 2012 but jeez...

    edit to add i posted about this on a 4runner facebook group im in and everyone said to run away because thats practically the underside of the vehicle. which is what i am doing haha. gonna go pick it up and figure it out...but its failing inspection at this point :/

    i didnt go to my normal mechanic due to scheduling issues and cant get to him til 9/14. and my gf crashed her car two weeks ago and that one is still in the shop...love it!

    anyhow...i suppose i need some advice here...do i tell my actual mechanic about this, or let him find it since it will need to pass inspection either way? and should i start looking at parts to order or is this mostly a pull and swap with OEM type situation? I know the previous owner had bilstein 5100's on the rear (i could never see what bilstein was on the front) and im fine with those if they need to get swapped.

    i am not extremely mechanically inclined, live in an HOA on an incline and need my car as a daily so I need someone to do it.
     
    Last edited: Aug 31, 2023
  22. Aug 31, 2023 at 2:22 PM
    ToyotaRDie

    ToyotaRDie New Member

    Joined:
    Apr 2, 2021
    Member:
    #20703
    Messages:
    226
    Gender:
    Male
    I would def check with your mechanic, if you can trust him. Unless there is an extreme amount of rust, seems like they want to take you for a ride.
     
    PrettyGoodSam and djwantke like this.
  23. Aug 31, 2023 at 2:23 PM
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,501
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Did they tell you why those things need replacing? Is it rust, worn bushings?

    If it’s rust, then it might be good to ensure the frame itself is not rotted. If would suck to put that money into it, just to fail next time because of a hole in the frame.

    None of the things you listed are particularly hard to do. Maybe your usual mechanic can get you a better price, or you can shop it around.
     
  24. Aug 31, 2023 at 2:56 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,506
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    :worthless:
     
    BGH2023 likes this.
  25. Aug 31, 2023 at 3:02 PM
    BearBio

    BearBio New Member

    Joined:
    May 3, 2021
    Member:
    #21264
    Messages:
    1,173
    First Name:
    Greg
    Vehicle:
    2019, Dark Blue SR5
    Roof rack, side bars
    1. Programmed new locations for our trip in fall into the GPS.
    2. Packed my First Aid kit into a new case.
     
    Yazzman and LCJ77 like this.
  26. Aug 31, 2023 at 3:34 PM
    Bodie the Dog

    Bodie the Dog Danger Ranger!

    Joined:
    Nov 14, 2019
    Member:
    #11975
    Messages:
    459
    Gender:
    Male
    Vehicle:
    2016 TEP, 1994 SR5
    Shrockworks sliders & rear bumper, Toytec 3/2 lift, ARB diff mod, 8 pod RGB LED's, RCI steel front skids, Big Sky katana rack, Reese roof rack, cool stickers.
    Cleaned out my front moonroof drains, because my 4runner has been smelling musty on random occasions. I ran weed whacker line down both and removed the end cap filters, both of which were pristine. Poured water down the two front drains and verified they dripped out underneath my truck. And the next day, as soon as I got on the freeway, water dripped out of my overhead console. FML I guess I need to check the rear drains next? Even though I didn't pour water down them?

    At least I got to clean a part of my truck I'd never cleaned before. And I got to use my NEW FLASHLIGHT!!!

    Moonroof_Drain.jpg
     
    jstam316, ColeRunner, Yazzman and 3 others like this.
  27. Aug 31, 2023 at 10:30 PM
    redbeard_tx

    redbeard_tx New Member

    Joined:
    May 8, 2023
    Member:
    #32782
    Messages:
    64
    Gender:
    Male
    Dallas, TX
    Vehicle:
    2010 Blizzard SR5
    Too much crap
    Installed some new LED 30,000 lumen low beams, about $80 bucks on Amazon for the pair. It was a fuckin steal for how bright they are. It's glorious.

    20230707_031316.jpg
     
  28. Aug 31, 2023 at 10:47 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,506
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
  29. Sep 1, 2023 at 6:12 AM
    Charlievee

    Charlievee New Member

    Joined:
    Dec 20, 2018
    Member:
    #8149
    Messages:
    1,357
    The old inspection rip off routine. Glad i no longer have to deal with those state endorsed thieves.
     
    redbeard_tx, raimieb and LCJ77 like this.
  30. Sep 1, 2023 at 7:05 AM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,044
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    Yeah like Pa Emissions SCAM!!!:frustrated::puke: New vehicles made to meet "EPA" bull Yet we still Pay for the "Proof"!!
     
    Last edited: Sep 1, 2023
    Bobafett, hossler1788 and redbeard_tx like this.

Products Discussed in

To Top