What have you done to your 5th Gen 4Runner today?

I bought my gutter guards at Home Depot. $2.41 each, pre covid. Needed 2 of them. Bottom portion didn't need to be altered at all, top portion was a cut-to-fit. Held in with zip ties. Came in black.

 

Yes!

 

As the Stoney Ranger stated above, you can get them at Home Depot. They do come powdercoated. Below is the Home Depot info. It is not necessary to remove the grille - remove the cover over the top of the radiator and you can easily reach in and work on the back of the grille. That cover removes by pushing down on the center of each plastic pin holding it in place, then just pulling up on the whole pin. I used black zip ties to hold the mesh in place - unless you look really close you can't even see them. There is a bend on the one side of the mesh but it is easy to straighten out using a hammer and a block of wood. Cheap protection for all that expensive gear behind the grille.

 

Not what I had planned but for these things coming into my life at the prices they did I couldn't resist. May change it up a bit down the road but am really happy with the look currently ...

Added (prices included shipping, which was ridiculous on the two shipped items)
170.22 for the upper grill straight from toyota
127.47 for the used nameplate on ebay
80 for the pro valence on offerup

for a grand total of 377.69 for all oem pieces and a much improved look

This also gave me the opportunity to remove the trd skidplate and clean the threads, add anti-seize and put it all back together feeling better that there's less chance for issues there in the future now.

Before

After

 

damn man now i want to clean my engine bay.

 

I haven’t wheeled much and I do regularly wash.

 

Had Metal Tech powered steel rock sliders and a set of 3 CBI steel skid plates installed on my Limited, also had the factory roof rails taken off and replaced by a Toyota kit to fill the screw holes. The 4x4 shop had never installed a set of the Metal Tech sliders previously (they make the only ones I've seen to fit the Limited without any trimming and with XReas in place) and were very impressed with their quality. Also had the differential fluid changed.

 

i'm curious about the intake now... which filter element are you using in there?

 

One of the reasons I liked this system is because you can use stock paper filter, which I did with the WIX equivalent. It also muffles the sound some so it's not there until you really want it. I could run a dry filter replacement if I wanted to.

Originally the system came with TRD's oiled filter but I'm not a fan of oiled filters.

 

thanks! i'm not going to even go into the whole oily filter good or bad debate. cleaning one is enough of a PITA for me to not want one. i've already lived that life.

 

Looks great! Any thoughts good or bad on the Agency 6 shackle? I've been thinking about getting that same one. Thanks.

 

I obviously haven't used it but it seems to be well built and pretty beefy. I really like it.

 

hidden BC Runners !

 

Sorry I missed this earlier
https://tvdvinyldecals.com/collecti...-for-2017-2023-4runner-trd-off-road-wheels-x4

 

What did you use? Is that a bolt? What size and how did you attach it? Was looking to do the same with a Garmin mini 2 as I have one installed for the front. Thanks!

 

Little dumb but gonna share anyways.

Long story short, Looks like new 4Runner factory Headunit not helping for high quality audio.

I was thinking to upgrade my music for high quality source and planning to get HiRes streaming service. I was about to order new gold plated 3.5mm cable for my phone's Samsung USB to 3.5mm DAC cable (support 24bit 384KHz). (I think Apple only support 16bit audio 48Khz). Just in time realize new 4Runners no more have 3.5mm aux jack. As far as I know bluetooth is not capable of producing high quality audio.

Here's a generic pic from internet to show what I mean..



Edit-
For anyone checking 4runner bluetooth it only supports 16bit AAC. LDAC is disabled.

 

Awesome! Thank you! I am making a trip to Yosemite and Indian Valley for some off roading and will see how it performs.

 

I did this as well.. used black zip ties in between the grooves.. blends in really good.. as for the top section I did a cardboard cut out and cut according to the shape. made some holes to feed the wires for the raptor lights..

 

That looks so good! Any pics from farther away

 

Rerouted the crossover pipe aft of the transfer case at an exhaust shop. Lack of a transfer case actuator in my trim helped with clearances:

 

It's the magnet that comes with Garmin dashcam 47/57. Used double sided tape to attach.
https://www.walmart.com/ip/Garmin-L...eHrPZKnFSRXxRORGmFRoC3iMQAvD_BwE&gclsrc=aw.ds
Not sure if it will work with Miní 2

 

Didn't get to post yesterday but oil change, replaced oil filter and tire rotation.



Schrockworks Rock Sliders being picked up next week.

 

Which unit does your 4Runner have? The newer units support hi-res FLAC and ALAC.

 

How often do you rotate them? Duratrac's like to me rotated often. I know guys who get a long life out of them, but rotate them every 3,000miles (5,000kms) religiously.

 

"Installed" a TRD sticker from Etsy today. Its a little cheesy but I kind of like it. We'll see if it stays long term.

 

Ppl do this on their Tacoma's to keep mice from crawling into the truck at the cowl area

 

Installed Tinkerer Shift handles, impressed with the quality, all metal

 

Check off Wind Cave while you're at Badlands, and do not miss Custer State Park. It could easily be an NP.

 

Added $100 running boards from a 2020 OR. Kid needed a step and I just couldnt justify slider cost when I know I'll never actually need them.

 

Thanks for the recommendation!