What have you done to your 5th Gen 4Runner today?

Cargo mat installed

 

Tell me about the Motorola MA-1 for wireless Android Auto. Right now, when I plug in my phone, my connection keeps re-booting every 15 seconds or so. So I've stopped using my wired connection and just connect via bluetooth. I'm wondering if this device might be useful. Thx

 

Installed the AJT push button start ring

 

Well that may be indicative of bigger issues between your phone, operating system, and head unit...

But as far as the MA-1, not much to tell really. You plug it in, synch it to your phone's BT, and once it's set up it connects automatically (if your phone BT is on) within about 45 seconds of startup. I have my Pandora set to start playing as soon as AA opens so I really don't even use the radio anymore. I will say the only issue I have seen with this (I've used it in another car for a while) is it eats my phone battery pretty fast. Not bad for driving around town but on the highway in like 2 hours my phone will be dead; so at that point it makes more sense just to plug the phone in to charge and get the wired AA connection. Sound quality is fine on music and calls and it works pretty much flawlessly - every so often it glitches a little but we're talking once every 20 drives and disconnecting and reconnecting solves it.

There are several threads on here about it IIRC, if you want more info.

 

Installed FJ Crutha side sunvisors and grab handles, overnight parts from Japan:



Write-up here: https://www.4runners.com/posts/585187/

 

Gave Photon a long overdue cleaning, now that the rains have subsided for the most part!

 

[QUOTE="MeefZah, post: 585082, member: 1122"





























Big Sky SBR-1 shotty rack. Made a short swaged cable to lock the gun to the rack to be in compliance with NY / NJ laws as we pass through (not shown).

 

Installed front Seat Jackers to drivers and passengers seats. WOW, what a difference in comfort. For me anyway, much better leg and back support. I sit in the seat now, instead of on the seat. Wish I would have jumped on this mod sooner.

 

Sunroof? Always wanted to do this, but my head is almost touching the ceiling as is.

 

It's not visible; it's tucked up in the curvature of the ceiling. Can't see it. That was the point of mounting it up there. It will get unloaded in NY and NJ just to hedge my bets since those guys are zealots, but generally it lives loaded up there. I'm also covered under LEOSA if I meet a total dickhead cop but I generally don't start by claiming that. Thanks for the tip though.

 

Blue Magic Clay Barred the entire rig top to bottom and McGuires Gold Class Carnuba Waxed it. Treated the XPEL front end with its own protector.

4Runner is looking as sharp as new.

Along the process I discovered it’s easy to trap a finger between the bottom of the lift gate and the rear bumper while vigorously shining with a towel. If it was a cybertruck, I would’ve lost a finger.

Also discovered minor scuffs from assholes in parking lots that I easily addressed.

 

Mine has a sunroof and I can tell you the seat jackets are game changers. I’m not even sure they change the head clearance since they really just raise the front of the seat. I’m 6’ and never noticed it. Easy install too.

 

Fabrication weekend (again). This past week I was thinking about having to have three positive leads going to the battery terminal (switch panel, air compressor and winch) and thought that would be sort of messy. So, I decided to install a bus bar and one main cut off switch to keep things tidy. So we had to make another mounting bracket for the bus bar. We also ran the add a fuse wire through the firewall for the ignition lead for the switch panel.

 

Can't remember if I had added this ... First wash in way too long and working on getting the full size spare under there

 

I'm 6"5'. It's close, but I don't hit my head. When I bought my 4Runner, I test drove one without a sunroof. Then I bought one with a sunroof. I had already done most of the paperwork. While hanging around the showroom to finish things up, I sat in a Limited. I was like oh crap, I might not fit in my new vehicle! Maybe something is different with the ORP, because it seemed easier to adjust the seat to fit comfortably.

 

Do you have the seat jackers on the passenger side too? I'm 6'4" and find there's even less headroom on the passenger side. So I've been hesitant to get get them for either side.

 

I don't have them. I have the rear of the seat tilted down while the front is tilted up.

My previous vehicle was a 2nd gen Tacoma. To me, the 4Runner seats are waaay better than the Tacoma.

 

I just cam from a 2nd gen Tacoma. A lot of guys, me included, put spacers on the back of the seat mounts to raise the back of the seats for more comfort. On 4Runners, I keep reading about front seat jackers...

I haven't done anything to the 4R seats and they are way more comfortable than the Tacoma. Just finished an 8 hour trip and was very comfortable.

 

Washed it and cleaned the engine bay…..

 

Clearanced my C4 skid plate so the driveshaft no longer contacts the gas tank skid during articulation. Long travel issues.

 

I changed from a 3rd Gen Taco to a 5th Gen SloRunner.

One big difference that I have noticed: Seating position.

In my Taco, I had seat jackers, to give me better hip/leg comfort. I don't need them in the 4Runner. (both vehicles had sunroofs - and I'm 6' 2") I also noticed my Taco/4Runner have roughly the same ground clearance, but my Taco had a higher step in vs the 4Runner. The seat on the 4Runner is more upright, like an office chair. The seat in the Taco was like sitting in a Corvette. I was on the floor.

 

When I grow up, I want to be like you. You have a garage floor that is so fancy that the tires have to park on carpeted mats.

P.S. You did a great job detailing it.

@Harringbr99 This is how you detail an engine bay.

 

Thanks,

 

Does anyone have a a source or info if one can replace the grey volume button on the steering wheel to a black one? I’ve vinyl wrapped the silver parts on my steering wheel.. all buttons on the wheel are black except the Volume (up/doen) button… WHY TOYOTA!?!!

 

What year is your 4Runner? Mine is a 2023 and they aren't grey.

 

Mines a 16. The left bottom button on mine is grey.. yours looks like it’s a call button..

 

Mine is a 19. My buttons are all black

 

Yah so that’s the button I want. Wonder if it has a part number for just it and not the entire left rim assembly

 

cleaned her up..

 

Removed the step board and ordered the step edition rock sliders with kick out

Then got her a lil dirty