Wheel / Tire question...

Good Afternoon all -

I am currently running a 285/70/17 falken a/t wildpeaks on trd wheels with pro comp nitro 2 inch rear/ 3 inch front level kit 65210K

I am looking to change out my wheels for the RAY10 SCS wheels in dark bronze. Sorry if this has been asked or answer....

Will the RAY10 SCS wheels
17 X 9 6 X 139.7 3.50" -38mm offset - fit my current tire? Could I simply change out the wheels or due to offset will I have to trim/modify anything?

Picture is my current wheel setup.

 

The tires will fit the wheels. But if they don't rub now, they will once you push them out over an inch and a half...scrub radius...

 

I’m not planning on adding spacers or anything. I’m just wondering if I swap out the wheels as the setup is now will they still rub? Sorry if that’s what you were saying and I misunderstood

 

Going from a +4 offset to a -38 offset is going to push the wheel out 42mm (about 1-5/8"), that means a larger scrub radius.

hopefully someone with similar wheels can chime in since I still have stock size tires on oem wheels (TRD Off Road which have a +15 offset). I would expect a lot of rubbing (but I could be wrong).

 

You're going to rub badly as this is a very big difference in offset. This video goes into great detail why.

(5) 4 Tips to ACTUALLY Fit Tires on Toyota IFS | 33s No BMC - YouTube

 

Thank you so much! And the video is great. Makes it easy for people like me to understand )) appreciate all the feedback guys

 

Yes you will rub. What will rub, you’ll have to install and find out after alignment. I have 295’s, just a tad wider. I had a to remove my rocker panels, trim the front bumper, and get a BMC. I still rub a little when the tire is stuffed into the wheel well.

 

Damn. Guess I need to find a decent shop around me lol… thanks guys!