1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What’s the best suspension upgrade for my 99 4Runner

Discussion in '3rd Gen 4Runners (1996-2002)' started by MuddyRims, Oct 10, 2021.

  1. Oct 10, 2021 at 4:23 PM
    #1
    MuddyRims

    MuddyRims [OP] New Member

    Joined:
    Oct 10, 2021
    Member:
    #23742
    Messages:
    2
    Gender:
    Male
    First Name:
    Taylor
    Vehicle:
    1999 Blue 4Runner SR5 4*4
    Brushguard, off-road lighting system
    What’s the best aftermarket suspension all around for a 3rd gen
     
  2. Oct 11, 2021 at 8:35 AM
    #2
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,860
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    Welcome to the forum, i think Bilstien 5100’s are the most common. They are fairly low cost, and performs well. This was my 02 with Bilstien’s.

    C46FEF8E-5707-4297-8646-1DFAA8913751.jpg
     
    Last edited: Oct 11, 2021
  3. Oct 11, 2021 at 8:41 AM
    #3
    JET4

    JET4 Old Member

    Joined:
    Dec 20, 2018
    Member:
    #8147
    Messages:
    4,234
    Gender:
    Male
    Southeast, Va.
    welcome, depends on how much you want to spend. when I had my 99 I had a Sonoran Steel lift. Liked it very much.
    http://www.sonoransteel.com/
     
  4. Oct 11, 2021 at 4:42 PM
    #4
    Kwikvette

    Kwikvette Kwik Fab

    Joined:
    Jun 25, 2020
    Member:
    #15120
    Messages:
    882
    Gender:
    Male
    559
    Vehicle:
    Multiple
    Custom tuned/valved will be your best bet.

    ADS comes to mind as they do everything in-house and can send you shocks valved to your liking upon ordering.

    Accutune offers the same service but they do so with other brand companies they themselves carry IE Fox, King, Icon, etc.

    Personally, I run King 2.5 front and rear and was not disappointed with how they felt on the worst type of washboards. Always found the right speed to take where I felt like I was "floating" above them.











    Of course, if you want to maximize travel....front and rear shocks aren't the only parts you're replacing -



    Long travel with bypass shocks and air bumps will feel way better though. Guess it all depends on your budget and needs.
     

Products Discussed in

To Top