weatherstrips and rubber seals for all windows

Hello. any one can help finding the weatherstripes and rubber seals for the hard top of a 1988 4runner. I really appreciate. I am doing a complete restoration.

thanks

 

Don't know if this will work

 

Good. It did.
Edit. Pay no mind to the prices. They are not necessarily accurate.
Be prepared for a bunch of this to be out of production.
Here are the corresponding part numbers:

65865A PIN, COVER TOP GUIDE
65865-89101 2 $9.17

65886B WEATHERSTRIP, COVER TOP SIDE
65807-89101 RH 1 $68.70
65808-89101 LH 1 $68.70

65888 WEATHERSTRIP, COVER TOP, FRONT OUTER
65888-89102 1 $36.05

65896A CAP, COVER TOP SET BOLT
65896-89101-02 RED, RED, TRIM3* 4 $5.38
65896-89101-05 BEIGE, BEIGE, TRIM4* 4 $5.38
65896-89101-13 GRAY, GRAY, TRIM1* 4 $5.38

65898 WEATHERSTRIP, COVER TOP SIDE, LOWER
65898-89101 RH 1 $17.58
65899-89101 LH 1 $17.58

90119-08171 *** STD. PART $1.34
90167-40012 *** STD. PART $0.83
90168-44001 *** STD. PART $0.79
90950-06023 *** STD. PART $1.19

 

what is the solution when the part is discontinued? how can you solve it?

 

You might try to find a forum or Reddit of hardcore 1st gen enthusiasts that might know of a specialty place. But more likely you will have to fashion something yourself.
I found a thread that gives the impression that this is not a new problem as the thread is 14 years old...

Good luck.

 

Came up with this:
https://softopper.com/products/adhesive-bulb-seal/
Check out comments in the review section. Someone used it successfully to re-seal their hardtop.

 

Thank you very much for your help BLKNBLU! appreciate it!

 

my biggest concern is the rubber seals for the back windows that slides, how you can fabricate this ones.

 

I imagine that may prove more difficult.

 

Maybe this guy has something...
https://www.4runners.com/threads/19...c-interior-parts-available.28170/#post-643359

 

thanks!