1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Uneven timing shown by the Picoscope

Discussion in '2nd Gen 4Runners (1990-1995)' started by Fermin4, Sep 29, 2020.

  1. Sep 29, 2020 at 8:28 AM
    #1
    Fermin4

    Fermin4 [OP] New Member

    Joined:
    Feb 1, 2020
    Member:
    #12978
    Messages:
    24
    Gender:
    Male
    First Name:
    Adams
    Vehicle:
    1995 2WD 4Runner 3VZ-E Engine OBD-1
    None
    I am still puling my hair and cannot figure out what is happening,

    Why would be the spacing (meaning diff. time period) between signals come from?

    I am very green at interpretation of the cope, will appreciate advice on these charts.
    Channel B was on the primary voltage and A channel on Secondary ignition just after the coils, before distributor
    Thanks20200927-Parade_2ms_1M-_A-TrigNo-1Cyl_002_200ms_1.jpg 20200927-Parade_2ms_1M-_A-TrigNo-1Cyl_002_200ms_1.jpg 20200927-Parade_2ms_1M-_A-TrigNo-1Cyl_002_200ms_1.jpg 20200927-Parade_2ms_1M-_A-TrigNo-1Cyl_002_200ms_1.jpg
     

Products Discussed in

To Top