TRD Pro Roof Rack tube diameter

Does anyone have info on the tube OD for the TRD Pro roof rack? It looks to be around 1.25" but I'm not certain.
Thanks!

 

less then ~1.78"

 

Thanks so much!!!

 

Does anyone with this Pro rack have a roof top awning attached to it?

 

@TRDPro916 I have an ARB awning mounted to the rack via U-bolts if you're still interested.

https://www.4runners.com/threads/hello-from-ny-first-t4r-just-hit-5-000-miles.21498/#post-268837

 

A good place to start if you want things That fit really well is search for mounts and things for the old fjcruiser roof rack. There are high jack and shovel mounts etc that just fit right on. There is an arb awning for it as well, but since we only got half a rack with the pros, it may or may not work well. For the cross rails, I run the Yakima mighty mounts (23h). They work well for just bolting things down and are how I have attached traction boards and a cargo case.

 

I just found out about the Yakima 23h! Definitely a huge help with these crossbars. I just picked up (4) to mount some traction boards.

 

Went to Home Depot and got 5 inch bolts to feed through with the same threads, some washers and wingnuts and they work perfectly. Have been up there at 85mph I’m night winds for trips out to the dirt with no issues etc.