1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Touch up Paint Advice

Discussion in 'Detailing' started by kB19, Feb 19, 2023.

  1. Feb 19, 2023 at 8:04 PM
    #1
    kB19

    kB19 [OP] New Member

    Joined:
    Sep 12, 2018
    Member:
    #7106
    Messages:
    20
    Recently purchased a 2001 4runner that has some beauty marks. Looking for advice on the best approach to fixing some of the paint blemishes. Ive watched plenty of videos of touching up paint the skilled DIY way, but I have 0 confidence in my ability to not mess it up. So would it be best to just sand the rust off and put some rust inhibitor on (unsure what color that stuff dries)? And then, if going that route, would be be the best clear coat option (I’ve read that applying ‘actual’ clear coat is the hardest step so I should probably avoid that).

    Ideally, I’d handle the spot on the fender, which is the largest both dent and rust wide, by finding a replacement at a junkyard since tat fender flare had to be tossed anyways, but it’s probably going to take a bit of luck to find a white fender from a 2001-2002 that’s in good condition. On the roof, I don’t care about the paint appearance since a roof rack will cover it up, but want to address the rust.
    61B32720-03E2-4847-B8B8-4920471FB306.jpg
    8A78233B-4CD4-482E-BB5C-4D71B19E07BC.jpg
    36A7B1EA-0C14-4DCB-B3E7-F8E91F7BEBAC.jpg
    1526AD6F-A848-443F-8210-9746AB631B94.jpg
     
  2. Feb 20, 2023 at 7:13 AM
    #2
    Mooglover

    Mooglover New Member

    Joined:
    Dec 29, 2022
    Member:
    #30308
    Messages:
    30
    Raleigh NC
    Vehicle:
    2021 ORP
    I have used Gemplers Rust Converter in the past on a Subaru I had. I wire brushed it clean and painted it on there, never had any spread after that. It will turn black and was pretty easy to use.
    I got some OEM touch up paint pens from Amazon for my 2021. I used it on the door edges and jambs and a few tiny chips which were starting to oxidize. It worked better than I expected for the price, just have to shake it a lot before applying. I also noticed it was easier to apply when it was warm outside Of course you will have to prep the area by wire brush and sanding to bare metal for it to stick properly.
     
  3. Feb 20, 2023 at 9:32 AM
    #3
    BGH2023

    BGH2023 Luvs his 4Runner

    Joined:
    Jan 27, 2023
    Member:
    #30907
    Messages:
    194
    Gender:
    Male
    Front Range of Komarado
    Vehicle:
    2023 ORP
  4. Feb 20, 2023 at 10:20 PM
    #4
    kB19

    kB19 [OP] New Member

    Joined:
    Sep 12, 2018
    Member:
    #7106
    Messages:
    20

Products Discussed in

To Top