1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Thoughts on my new 87 4Runner

Discussion in '1st Gen 4Runners (1984-1989)' started by Nrofrbes11, Feb 6, 2019.

  1. Feb 6, 2019 at 11:16 AM
    #1
    Nrofrbes11

    #1
    Nrofrbes11 [OP] New Member

    Joined:
    Feb 6, 2019
    Member:
    #8713
    Messages:
    10
    Gender:
    Male
    First Name:
    Nick
    Vehicle:
    Black 1987 4Runner
    I purchased my 87 4Runner a few weeks ago for $6,500. It has a new rebuilt 22re with receipts. It now has about 13k miles. It also has had the transmission replaced 5 speed, and I was told the suspension was replaced but not sure if it was since the rear end still sags but it came with add a leafs I need to install. I just want some thoughts of what you think of it and how I should build it? I am thinking about getting new tires 33x10.5x15. I've heard those fit on stock suspension. I would like to keep stock suspension for now if the 33's fit if not later down the road a 2 or 3 inch lift. What do you recommend without breaking the bank? The build im going for is just a nice camping rig that can go anywhere. Im not planning on doing any crazy crawling. Lastly, what are some nice good looking tube rear bumpers with a hitch receiver? I have been looking at the 4xInnovations tube rear bumper. Any thoughts?
    Thanks for the info
    Screenshot_20190114-131316_Facebook.jpg Screenshot_20190114-110919_Snapchat (1).jpg Screenshot_20190114-131313_Facebook.jpg Screenshot_20190114-131349_Messenger (1).jpg Screenshot_20190114-131352_Messenger.jpg Screenshot_20190114-131303_Facebook.jpg Screenshot_20190114-131259_Facebook (1).jpg Screenshot_20190114-131309_Facebook (1).jpg Screenshot_20190114-131252_Facebook.jpg Screenshot_20190114-131320_Facebook.jpg Screenshot_20190114-131403_Messenger.jpg Screenshot_20190114-131249_Facebook.jpg 20190205_172135.jpg 20190205_172122.jpg
     
    Nrofrbes11, Feb 6, 2019
    #1
    Mannyac123, siblue, red 1 and 2 others like this.
  2. Feb 6, 2019 at 11:22 AM
    #2
    87ret4runner

    #2
    87ret4runner New Member

    Joined:
    Jan 27, 2019
    Member:
    #8583
    Messages:
    28
    Gender:
    Male
    First Name:
    Steven
    Vehicle:
    Red 87 Turbo 4runner
    CT26 turbo, ARP Studs, 82 Supra AFM
    Nice rig... congrats
    I'm running 31" 10.5 tires on stock rims
    Puts my speedometer off about 5mph
    Lot of folks running 33s it takes more ponies to get them rolling...
     
    87ret4runner, Feb 6, 2019
    #2
  3. Feb 6, 2019 at 11:28 AM
    #3
    87ret4runner

    #3
    87ret4runner New Member

    Joined:
    Jan 27, 2019
    Member:
    #8583
    Messages:
    28
    Gender:
    Male
    First Name:
    Steven
    Vehicle:
    Red 87 Turbo 4runner
    CT26 turbo, ARP Studs, 82 Supra AFM
    You... can do the Zuk mod for the saggy butt
     
    87ret4runner, Feb 6, 2019
    #3
  4. Feb 6, 2019 at 11:36 AM
    #4
    Nrofrbes11

    #4
    Nrofrbes11 [OP] New Member

    Joined:
    Feb 6, 2019
    Member:
    #8713
    Messages:
    10
    Gender:
    Male
    First Name:
    Nick
    Vehicle:
    Black 1987 4Runner
    I currently have 31x10.5x15 and i'm not sure if my wheels are stock but I believe they are, and my speedometer is 2 mph slow. yeah I understand they will take more to get rolling. Do you know if they fit on stock suspension?
     
    Nrofrbes11, Feb 6, 2019
    #4
  5. Feb 6, 2019 at 11:37 AM
    #5
    Nrofrbes11

    #5
    Nrofrbes11 [OP] New Member

    Joined:
    Feb 6, 2019
    Member:
    #8713
    Messages:
    10
    Gender:
    Male
    First Name:
    Nick
    Vehicle:
    Black 1987 4Runner
    What is the Zuk mod I've never heard of it?
     
    Nrofrbes11, Feb 6, 2019
    #5
  6. Feb 6, 2019 at 11:54 AM
    #6
    87ret4runner

    #6
    87ret4runner New Member

    Joined:
    Jan 27, 2019
    Member:
    #8583
    Messages:
    28
    Gender:
    Male
    First Name:
    Steven
    Vehicle:
    Red 87 Turbo 4runner
    CT26 turbo, ARP Studs, 82 Supra AFM
    Google ZUK mod... its a simply DIY fix for saggy butt...i did this on our old 87 about 15 years ago and fixin to do it on our turbo 87...20180801_202910.jpg 20180723_221314.jpg
     
    87ret4runner, Feb 6, 2019
    #6
    Kyblack76 likes this.
  7. Feb 6, 2019 at 2:06 PM
    #7
    HoBoDanny

    #7
    HoBoDanny Dude...

    Joined:
    Feb 5, 2019
    Member:
    #8697
    Messages:
    966
    Gender:
    Male
    First Name:
    Daniel
    Kentucky
    Vehicle:
    2004 SR5 V6 4WD 4Runner
    RCI Skid Plate CBI Ditch Light Brackets Hankook DynaPro ATM RF10 265 70R17 113T Tires 1.25” Wheel Spacers TPMS Bypass Mod Hydrocarbon Filter Removed Merca decal 2” leveling kit front only Black headlights
    That thing looks amazing! As far as how to build it, seams like you know what you want out of it. Hell I would just enjoy it as is. :thumbsup:
     
    HoBoDanny, Feb 6, 2019
    #7
  8. Feb 6, 2019 at 4:28 PM
    #8
    Kyblack76

    #8
    Kyblack76 New Member

    Joined:
    Jan 21, 2018
    Member:
    #5354
    Messages:
    1,143
    Gender:
    Male
    First Name:
    Kyle
    Layton, Utah
    Vehicle:
    18 TRD O.R
    No input on mods, but here to say that is a rad looking rig,... and looks like a super fun rig to head out on adventures for sure. Good shit man...best of luck on the future funnzies
     
    Kyblack76, Feb 6, 2019
    #8
  9. Feb 6, 2019 at 4:30 PM
    #9
    87ret4runner

    #9
    87ret4runner New Member

    Joined:
    Jan 27, 2019
    Member:
    #8583
    Messages:
    28
    Gender:
    Male
    First Name:
    Steven
    Vehicle:
    Red 87 Turbo 4runner
    CT26 turbo, ARP Studs, 82 Supra AFM
    Performance wise for a 22re you can get the 82 Supra AFM, CAI, LCENGINEERING long tube header and 2 1/2" exhaust, electric fan, and a LCE RV Cam...
     
    Last edited: Feb 6, 2019
    87ret4runner, Feb 6, 2019
    #9
  10. Feb 6, 2019 at 5:23 PM
    #10
    BestGen

    #10
    BestGen Member #57

    Joined:
    Apr 12, 2014
    Member:
    #57
    Messages:
    954
    Gender:
    Male
    First Name:
    Paul
    Haunted Turnbull Canyon, CA
    Vehicle:
    1988 4Runner XTE 22RE/W56, '93 G144 4.88s, Spartan Locker, AllPro Sliders, OEM 15x6" rims, BFG KM2 33/10.5s, 4Crawler 1.5" BJS, OME 2" Dakar springs, TG rear bumper.
    33"KM2s, 4.88s, Spartan Locker, TG rear bumper, AllPro Kickout sliders, 4Crawler 1.5" BJS, OME 2" Dakar springs.
    Nice rig! You can definitely run 33/10s on the original rims. I did for years without a lift. I did do the pinch weld mod. I'm not sure about running them on aftermarket rims. A header definitely helps but don't waste your money on any "cold" air intake. The factory intake actually draws air from outside the engine compartment. IMG_0350.jpgIMG_0349.jpg
     
    BestGen, Feb 6, 2019
    #10
  11. Feb 6, 2019 at 6:24 PM
    #11
    BestGen

    #11
    BestGen Member #57

    Joined:
    Apr 12, 2014
    Member:
    #57
    Messages:
    954
    Gender:
    Male
    First Name:
    Paul
    Haunted Turnbull Canyon, CA
    Vehicle:
    1988 4Runner XTE 22RE/W56, '93 G144 4.88s, Spartan Locker, AllPro Sliders, OEM 15x6" rims, BFG KM2 33/10.5s, 4Crawler 1.5" BJS, OME 2" Dakar springs, TG rear bumper.
    33"KM2s, 4.88s, Spartan Locker, TG rear bumper, AllPro Kickout sliders, 4Crawler 1.5" BJS, OME 2" Dakar springs.
    I've got the TrailGear rear bumper. It's alright. Bent it the first time out running Dishpan Springs trail near Big Bear. Spring for the extra side braces that tie into the frame. IMG_0939.jpg
     
    BestGen, Feb 6, 2019
    #11
  12. Feb 6, 2019 at 7:30 PM
    #12
    87ret4runner

    #12
    87ret4runner New Member

    Joined:
    Jan 27, 2019
    Member:
    #8583
    Messages:
    28
    Gender:
    Male
    First Name:
    Steven
    Vehicle:
    Red 87 Turbo 4runner
    CT26 turbo, ARP Studs, 82 Supra AFM
    I mentioned the CAI because IF you can find an 82 Supra AFM you'd have to modify it to use your stock air breather... this is how i did mine even though it's on a turbo, it would basically be the same on the 22re20180921_085626.jpg
     
    87ret4runner, Feb 6, 2019
    #12
  13. Feb 6, 2019 at 7:35 PM
    #13
    87ret4runner

    #13
    87ret4runner New Member

    Joined:
    Jan 27, 2019
    Member:
    #8583
    Messages:
    28
    Gender:
    Male
    First Name:
    Steven
    Vehicle:
    Red 87 Turbo 4runner
    CT26 turbo, ARP Studs, 82 Supra AFM
    The 82 Supra AFM is plug n play...
    There are other model AFM housings that work but you have to swap out the internals... well documented and not too difficult... lots of info about that mod on the yotatech forum
     
    87ret4runner, Feb 6, 2019
    #13
  14. Feb 7, 2019 at 1:11 PM
    #14
    Nrofrbes11

    #14
    Nrofrbes11 [OP] New Member

    Joined:
    Feb 6, 2019
    Member:
    #8713
    Messages:
    10
    Gender:
    Male
    First Name:
    Nick
    Vehicle:
    Black 1987 4Runner
    thanks man I appreciate it!!
     
    Nrofrbes11, Feb 7, 2019
    #14
    HoBoDanny[QUOTED] likes this.
  15. Feb 7, 2019 at 1:12 PM
    #15
    Nrofrbes11

    #15
    Nrofrbes11 [OP] New Member

    Joined:
    Feb 6, 2019
    Member:
    #8713
    Messages:
    10
    Gender:
    Male
    First Name:
    Nick
    Vehicle:
    Black 1987 4Runner
    Thx for the info but id like to keep the motor as is just for reliability reasons.
     
    Nrofrbes11, Feb 7, 2019
    #15
  16. Feb 7, 2019 at 1:15 PM
    #16
    Nrofrbes11

    #16
    Nrofrbes11 [OP] New Member

    Joined:
    Feb 6, 2019
    Member:
    #8713
    Messages:
    10
    Gender:
    Male
    First Name:
    Nick
    Vehicle:
    Black 1987 4Runner
    I was looking at that rear bumper as well but I want something with a bit more presence so it doesnt look like it has no bumper thats why i like the 4xinnovations one.
    bumper 1.jpg bumper 2.jpg
     
    Nrofrbes11, Feb 7, 2019
    #16
  17. Feb 7, 2019 at 1:22 PM
    #17
    Nrofrbes11

    #17
    Nrofrbes11 [OP] New Member

    Joined:
    Feb 6, 2019
    Member:
    #8713
    Messages:
    10
    Gender:
    Male
    First Name:
    Nick
    Vehicle:
    Black 1987 4Runner
    I will look into the headers but not sure if ill pull the trigger since California's stupid exhaust laws but when i move to Colorado ill for sure consider it. Awesome thx for confirming that 33x10.5 fit with stock suspension
     
    Nrofrbes11, Feb 7, 2019
    #17
  18. Feb 7, 2019 at 1:24 PM
    #18
    Nrofrbes11

    #18
    Nrofrbes11 [OP] New Member

    Joined:
    Feb 6, 2019
    Member:
    #8713
    Messages:
    10
    Gender:
    Male
    First Name:
    Nick
    Vehicle:
    Black 1987 4Runner
    I've only had it for 3 weeks washed it 2-3 times but has only stayed clean for a day before mud is back on it. We've been getting a lot of rain in the bay recently.
     
    Nrofrbes11, Feb 7, 2019
    #18
  19. Feb 7, 2019 at 6:18 PM
    #19
    BestGen

    #19
    BestGen Member #57

    Joined:
    Apr 12, 2014
    Member:
    #57
    Messages:
    954
    Gender:
    Male
    First Name:
    Paul
    Haunted Turnbull Canyon, CA
    Vehicle:
    1988 4Runner XTE 22RE/W56, '93 G144 4.88s, Spartan Locker, AllPro Sliders, OEM 15x6" rims, BFG KM2 33/10.5s, 4Crawler 1.5" BJS, OME 2" Dakar springs, TG rear bumper.
    33"KM2s, 4.88s, Spartan Locker, TG rear bumper, AllPro Kickout sliders, 4Crawler 1.5" BJS, OME 2" Dakar springs.
    That's a really nice bumper. A lot sturdier than the TG pos I got. Also quite a bit more $$$ too but worth it.
    They make smog-legal headers with the Cal. E.O. certification.
     
    BestGen, Feb 7, 2019
    #19
  20. Feb 8, 2019 at 9:31 AM
    #20
    Nrofrbes11

    #20
    Nrofrbes11 [OP] New Member

    Joined:
    Feb 6, 2019
    Member:
    #8713
    Messages:
    10
    Gender:
    Male
    First Name:
    Nick
    Vehicle:
    Black 1987 4Runner
    Thank you I don't think that bumper is too expensive given the prices of warns and arb's and even with the new California new exhaust laws the headers are allowed?
     
    Nrofrbes11, Feb 8, 2019
    #20
  21. Feb 8, 2019 at 1:39 PM
    #21
    RhodyRunner

    #21
    RhodyRunner New Member

    Joined:
    Sep 8, 2018
    Member:
    #7043
    Messages:
    48
    Gender:
    Male
    First Name:
    Jeremy
    Rhode Island
    Vehicle:
    2013 Black SR5
    Armored Lighting 50" Curved Double Row LED 42,000 Lumens Rago Fabrication curved LED mounts Billstein 5100 at the corners Cornfed 3/4" spacer in rear ProComp 7069-7983 17x9 -6 offset, 4.75"backspace Falken WildPeak AT3 265/70-17 LIGHTENING DARK 10000 Lumens 9005 LED Headlight Bulbs LIGHTENING DARK 10000 Lumens H11 LED Headlight Bulb VIOFO A119G with GPS Car Dash Cam Boss BN965BLC SMARTLINER All Weather Cargo Liner YITAMOTOR Floor Mats Ever Ready First Aid Meditac Tactical Trauma IFAK Kit with Trauma Pack Quickclot and Israeli Bandage in Molle Pouch, North American Rescue Hyfin Vent Chest Seal, Celox V12090 Blood Clotting Granule Applicator and Plunger
    Yep she looks good. Nice buy.
     
    RhodyRunner, Feb 8, 2019
    #21
  22. Feb 8, 2019 at 5:57 PM
    #22
    90yota

    #22
    90yota New Member

    Joined:
    Jan 10, 2019
    Member:
    #8392
    Messages:
    17
    Gender:
    Male
    First Name:
    Mike
    Great Falls,MT
    Vehicle:
    89 runner
    Good looking 1st gen. I would do a ball joint spacer and hd torsion bars up front and in the rear replace with ome springs. You could run some tall and skinny tires no issues. I dont know exact cost but I know that would be around $1k range. Not including tires. I'm also running the TG rear bumper but I agree with @BestGen and you need the brace. Attached is a pic of mine on 31s. Torsion bars are torqued all the way out with an add a leaf and longer shackles. It rides like crap but that will be changing soon

    20190207_152822.jpg
     
    90yota, Feb 8, 2019
    #22
Register FREE to Reply!
To Top