Suspension advice please, currently on 5100 with rear spacer

Hello all, happy weekend! So got an 05 4runner sr5 last year bone stock Had a shop install billstein 5100 front and rear, with 1" spacer in rear. The shop only adjusted the front to 1.75 instead of 2.5 max height in front. I was able to fit 16" tires 265/75/16, did have to trim front wheel wells.
Anyways, I hate the stance, bad rake up front, back sits way higher it seems. I want the front at least as high as the back, driving me nuts lol. I know I could remove rear spacer, but not wanting to go lower in back.
I don't want to pay all the labor just to adjust the front from 1.75 to 2.5, plus I think it would still have that forward rake. Any parts I can add to the 5100 setup to get more lift? Or best way to get the stance level. I would prefer backward rake to forward if it came down to it.
I wouldn't mind going to next size up tire, taller and wider than the 265/75/16, and maybe adding 17" wheels.
Any input or advice is greatly appreciated. I don't have thousands of dollars to put into this rig, but not trying to buy the rough country 3" lift either lol.

 

Before and after...bone stock first pic. Second pic after adding billstein 5100 front and rear, 1" spacer in rear. Upsized tires to 265/75/16.

 

Why not go at it appropriately and just get new coils for the rear that'll provide the height over stock you need?

I would also suggest replacing the front spring on your coilovers if you used your stock ones; they're old and overdue.

 

Thanks, exactly the info I need. Appreciate the input