1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Roof Basket / Rack Recommendations

Discussion in '5th Gen 4Runners (2010-2024)' started by GeorgeH, Jul 28, 2023.

  1. Jul 28, 2023 at 6:11 PM
    #1
    GeorgeH

    GeorgeH [OP] New Member

    Joined:
    Jul 28, 2023
    Member:
    #34441
    Messages:
    4
    Gender:
    Male
    Vehicle:
    2022 Toyota 4Runner TRD Sport
    Howdy

    I recently got a stock 2022 4Runner TRD Sport and have started looking into getting a basket or rack for the roof. I would prefer a basket style, but wonder if that would limit the versatility. I definitely want something full length. The Gobi Ranger is exactly what I am looking for, but I can't handle the wait times. I would like to be able to attach things like a kayak rack, surfboard pads, rod tube, etc. Is that even possible with a basket? I have also looked into the BajaRack standard long basket, which I like the looks of. I am extremely new to this and would love y'alls input. Thanks!
     
  2. Jul 28, 2023 at 7:14 PM
    #2
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,471
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Welcome here! And nice choice on your Runner
    Myself, I recently got a 3/4 length powder coated steel basket, flush on oem cross bars. Only need it for camping, the dump, building materials and furniture.
    You sound like your budget is higher, and want one of the full lengths, probably low pro.
    I recommend Westcott and Prinsu. I trust you'll get many great recommendations!
    goodluck
     
  3. Jul 28, 2023 at 7:32 PM
    #3
    GeorgeH

    GeorgeH [OP] New Member

    Joined:
    Jul 28, 2023
    Member:
    #34441
    Messages:
    4
    Gender:
    Male
    Vehicle:
    2022 Toyota 4Runner TRD Sport
    I like the look of the Prinsu, seems like mor attachment points than the Westcott. What brand is your basket?
     
  4. Jul 28, 2023 at 8:20 PM
    #4
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,471
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Yeah sure man, and Gobi is slick too, except for wait times as you say.
    Believe it or not I bought off Amazoné. I think the brand is RAA, whatever that means baha.
    64x39x6, 1" rails, 42lbs, 250lbs load

    61i1E3fgvnL.jpg
    IMG_20230429_175446443.jpg
    IMG_20230430_134957275_HDR.jpg
     
  5. Jul 29, 2023 at 4:02 AM
    #5
    2021venture

    2021venture New Member

    Joined:
    Jan 15, 2023
    Member:
    #30658
    Messages:
    841
    Gender:
    Male
    First Name:
    Todd
    Vehicle:
    2021 Venture
    Elka 2.5, Apache Offroad UCA, durobumps, RCI full skids, RSG sliders, 10 lb Powertank, Maxtrax, Hi lift jack, Westscott Designs modular roof rack and ladder, ARB rear diff breather relocate, ECGS bushing upgrade, c4 low profile bumper, Baja designs S8 lightbar, warn evo winch, factor 55 ultrahook, 80% off-road rear bumper, 4.56 regear
    Last edited: Jul 29, 2023
    djwantke likes this.
  6. Jul 29, 2023 at 10:03 AM
    #6
    wax poetic

    wax poetic Raking like a mofo

    Joined:
    Mar 28, 2023
    Member:
    #32027
    Messages:
    634
    Gender:
    Male
    Arizona
    Vehicle:
    21 Super White TRD OR
    OEM+ Trail Edition rims w/ Toyo AT3 in stock size / OEM Black Lug nuts OEM Heritage Grill OEM Black Valences (f + r) Westcott Sliders/Modular Roof Rack Roam 95L case DIY sleeping platform
    Westcott modular give you the option of a flat top or a slight basket. And they are a great company with solid products.

    If you look at my bars in this pic, you can see how I dropped a few of them to the lower setting, creating a small "basket"

    IMG_0872.HEIC.jpg
     
  7. Jul 29, 2023 at 6:36 PM
    #7
    GeorgeH

    GeorgeH [OP] New Member

    Joined:
    Jul 28, 2023
    Member:
    #34441
    Messages:
    4
    Gender:
    Male
    Vehicle:
    2022 Toyota 4Runner TRD Sport
    Do you have any experience with attaching stuff to the rack? Most things like kayak racks, fishing rod holders, etc. are designed to connect to the rails and I am wondering if the Baja metal tubing is too thin for that...
     
  8. Jul 29, 2023 at 6:38 PM
    #8
    GeorgeH

    GeorgeH [OP] New Member

    Joined:
    Jul 28, 2023
    Member:
    #34441
    Messages:
    4
    Gender:
    Male
    Vehicle:
    2022 Toyota 4Runner TRD Sport
    I like the looks of this. My only hesitation is that it's not very deep. When/if you haul boxier things (coolers, etc) do you have any issue securing them? If you don't do that, do you think you would have issues?
     
  9. Jul 29, 2023 at 10:08 PM
    #9
    Tacodaco89

    Tacodaco89 New Member

    Joined:
    Aug 12, 2022
    Member:
    #28190
    Messages:
    50
    Arizona
    Vehicle:
    14 4runner sr5 4wd
  10. Jul 30, 2023 at 3:37 AM
    #10
    2021venture

    2021venture New Member

    Joined:
    Jan 15, 2023
    Member:
    #30658
    Messages:
    841
    Gender:
    Male
    First Name:
    Todd
    Vehicle:
    2021 Venture
    Elka 2.5, Apache Offroad UCA, durobumps, RCI full skids, RSG sliders, 10 lb Powertank, Maxtrax, Hi lift jack, Westscott Designs modular roof rack and ladder, ARB rear diff breather relocate, ECGS bushing upgrade, c4 low profile bumper, Baja designs S8 lightbar, warn evo winch, factor 55 ultrahook, 80% off-road rear bumper, 4.56 regear
    The baja rack is stong I have no concerns with the tube steel. One thing I like about it is the entire rack has so many tie down or anchor points. I use straps attached to the tube steel tightened down and have not seen the tube steel flex at all.

    I had the factory Yakima basket before this. Tube steel on Bajarack feels thicker and stronger than the Yakima when putting tension on straps securing loads.

    The roof supporting weight is the limiting factor for me not the baja rack. Rack is very overbuilt and well engineered all one piece welded steel. The rack could support me standing on it but I don't trust the roof with that much weight.

    Bajarack has shipped quick for rack and mounts I bought.

    I don't have a cayak. Any cayak owners with experience on best tie down/anchor points with different rack options. I think I have seen some going down to bumper.
     
    Last edited: Jul 31, 2023

Products Discussed in

To Top