1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Ride height questions 4th gen

Discussion in 'Suspension' started by RepentOrPerish, Sep 3, 2024.

  1. Sep 3, 2024 at 10:13 AM
    #1
    RepentOrPerish

    RepentOrPerish [OP] New Member

    Joined:
    Aug 20, 2024
    Member:
    #42314
    Messages:
    85
    Gender:
    Male
    Vehicle:
    4thGenv8
    Hey guys, just trying to figure out whats going on and what to expect. 2006 v8

    I am changing my rear coils as I believe they are completely shot, with moog coils and bilstien 5100 struts. I plan to run at stockish height.
    Front suspention is 1year old coil over kyb gas a just shocks.

    Coming to my question/concern. Right now when i measure ground to fender i am getting 35.5" and 36" at the back(full gas tank bringing the one side down .5" i believe) and at the front i am at 34.5" on both sides.. this is with what i believe are completely worn out rear springs and likley because of that blown kyb gforce struts.

    When i replace both in the rear will the ride height in the front be another inch lower.. what should i be expecting or how to rectify this.. or will these so called gas a just shocks compensate...
    Thanks for any help.
     
  2. Sep 3, 2024 at 1:54 PM
    #2
    RepentOrPerish

    RepentOrPerish [OP] New Member

    Joined:
    Aug 20, 2024
    Member:
    #42314
    Messages:
    85
    Gender:
    Male
    Vehicle:
    4thGenv8
    Im wondering if the kyb gas-a-just coilovers arent equipt with a heavy enough spring for the heavier v8 engine.
     

Products Discussed in

To Top