1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Rear Seal Fix

Discussion in '3rd Gen 4Runners (1996-2002)' started by OBX Shred Mobile, May 23, 2024.

  1. May 23, 2024 at 8:56 AM
    #1
    OBX Shred Mobile

    OBX Shred Mobile [OP] New Member

    Joined:
    Nov 6, 2023
    Member:
    #36558
    Messages:
    13
    Gender:
    Male
    Vehicle:
    1999 Limited V6 Auto 4WD
    How much should I expect to pay to have my rear seal oil leak fixed and what other services should I consider at the same time. Note - I don't have the time or tools to do this myself. Thanks.
     
  2. May 23, 2024 at 10:52 AM
    #2
    that'smy4runner

    that'smy4runner New Member

    Joined:
    Apr 21, 2024
    Member:
    #39976
    Messages:
    139
    Gender:
    Male
    If its a manual transmission you should have the clutch replaced.
     
    roboturner likes this.
  3. May 23, 2024 at 11:36 AM
    #3
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    2,095
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    Whole transmission has to come out. This includes the 4x4 transfer case.

    Like was mentioned, get the clutch done if you have a manual.

    Now is the time for resealing the oil pan too I think unless it shows absolutely no signs of leaks.

    Same with the oil cooler on the side of the block.

    At least $1.5k. More likely $2k.
     
  4. May 23, 2024 at 11:51 AM
    #4
    that'smy4runner

    that'smy4runner New Member

    Joined:
    Apr 21, 2024
    Member:
    #39976
    Messages:
    139
    Gender:
    Male
    If you can find someone to do it. The shops in my small town all declined to do my clutch job.
     
  5. May 24, 2024 at 5:56 AM
    #5
    that'smy4runner

    that'smy4runner New Member

    Joined:
    Apr 21, 2024
    Member:
    #39976
    Messages:
    139
    Gender:
    Male
    It doesn't really take much in the way of special tools to do the job, but it does take time if (like me) you aren't a particulrly skilled mechanic. A tranny jack ($100 at Harbor Freight) and less than $100 worth of other tools (stubby ratchets, wobble extensions, seal puller) maybe a bearing puller will do it. Not a fun job but a big money saver
     

Products Discussed in

To Top