1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

PRO-TRUCK LIFT SYSTEM (Stage 1)

Discussion in '5th Gen 4Runners (2010-2024)' started by Runnin4mo, Aug 17, 2020.

  1. Aug 17, 2020 at 2:15 PM
    #1
    Runnin4mo

    Runnin4mo [OP] New Member

    Joined:
    Feb 27, 2019
    Member:
    #8981
    Messages:
    59
    Gender:
    Male
    Hey all,
    Looking at Eibach PRO-TRUCK LIFT SYSTEM (Stage 1)

    It's +2.75 front and +1 Rear.

    My question is, will we need UCAs for this?
    I've been getting mixed reviews all over the boards saying yes/no/maybe/maybe not. From what I could gather from the census, a lift of 3" or higher NEEDs new UCAs, while anything under 3" does perfectly fine without them. Then some say it actually depends on the lift system your getting.

    So, if anyone has the Eibach system, do you have new UCAs? And if not, hows it running?

    Thanks all!
     
  2. Aug 17, 2020 at 2:40 PM
    #2
    nimby

    nimby in the drink

    Joined:
    Mar 27, 2017
    Member:
    #3777
    Messages:
    4,671
    First Name:
    Jake
    California
    Vehicle:
    2018 SR5P
    Do you need them? No

    Will your truck ride and drive better with them? Yes

    If you go with bigger tires and lower offset wheels, a UCA will also help with adjusting your tire position in the wheel well so you can potentially avoid rubbing. This depends on the tire size and wheel offset though.
     
    gunsnob and A&P like this.

Products Discussed in

To Top