Power Steering Issue

Hey everyone, I have a 1995 3.0 V6 and having an issue with my power steering. I can't find anything about my specific issue so I thought I'd come on here and post.
The symptoms are as follows:
- If I am stationary and turn the wheel, the power steering pulley freezes up and the belt squeals.
- If I am moving, and turn my wheel all the way to the right or left, or max out my turn radius at any point, (for example if I am backing out of a parking spot or trying to make a U-turn) the belt will squeal.
- There is no leak from my pump and the fluid consistently reads fine on the dipstick.
- I changed the fluid a few months back and it didn't solve the issue
-Other than that I have no issue turning while I am moving and I get no squeal

Is it a bad pump? Or is it something else I haven't considered yet?

 

Check all belts for tightness. Go a little more than you think, the belt and pump will handle it. In those scenarios you describe, you are asking the pump for a lot of work and the belt needs to be tight so the pump can work.

Otherwise, if you are 100% sure they are tight enough, my call would be a bad pump.