1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Passenger side headlight out

Discussion in '3rd Gen 4Runners (1996-2002)' started by davidmeiland, Feb 8, 2023.

  1. Feb 8, 2023 at 11:53 AM
    #1
    davidmeiland

    davidmeiland [OP] New Member

    Joined:
    Feb 8, 2023
    Member:
    #31142
    Messages:
    1
    Gender:
    Male
    2001 4Runner Limited. Had it 20 years with virtually no issues. Last night noticed that the passenger side headlight and amber running light are out. Driver side both work, as do turn signals and rear lights. There are two bulbs out and it seems unlikely that they would both fail at once, but not impossible. I checked all of the fuses in the engine compartment and inside the cabin and they're all intact. Recently had to have some wiring replaced after a rat climbed up in the engine compartment to get warm and chewed on stuff, resulting in crank/no start. Same thing happened shortly after we got it when we lived elsewhere. So, maybe there was more rat damage than was found. Is there other stuff a non-mechanic should check before taking it in? Thanks in advance.
     
  2. Feb 8, 2023 at 12:15 PM
    #2
    steelevo

    steelevo Not so new anymore...

    Joined:
    Nov 29, 2022
    Member:
    #29845
    Messages:
    2,588
    Utah
    Vehicle:
    2023 4Runner TRD Pro Solar Octane
    Besides physical wiring damage, check for corrosion on and in the connections. A multimeter may help diagnose the issue.
     
  3. Feb 8, 2023 at 12:46 PM
    #3
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    2,095
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    Always worth a try replacing at least one of the bulbs. It's not impossible for both to go. If you have a multimeter, check for 12v at the light.
     
    Toy4X4 and RumHamRunner73 like this.
  4. Feb 9, 2023 at 3:12 AM
    #4
    Toy4X4

    Toy4X4 New Member

    Joined:
    Jul 18, 2020
    Member:
    #15580
    Messages:
    7,808
    Gender:
    Male
    First Name:
    Jeff
    Vehicle:
    2020 Offroad Prem. 4-runner
    RevTek 3" front- 2" rear leveling, JBA uca's, LED interior lights, Cooper 275-70-17 AT3 LT
    Welcome from Wisconsin! Electrical... yuck! A huge percentage of electrical problems on vehicles are 'ground' related.
     
  5. Feb 23, 2023 at 8:36 PM
    #5
    nutsaboutsoccer

    nutsaboutsoccer New Member

    Joined:
    Nov 18, 2022
    Member:
    #29670
    Messages:
    26
    Gender:
    Male
    Vehicle:
    1999 4Runner Limited
    I second the bad ground. Especially in your part of the country.
     
  6. Feb 25, 2023 at 12:32 PM
    #6
    PhantomTweak

    PhantomTweak New Member

    Joined:
    Dec 20, 2019
    Member:
    #12402
    Messages:
    1,224
    Gender:
    Male
    First Name:
    Patrick
    OREGON
    Vehicle:
    1999 4Runner, bone stock
    None. Bone Stock. EXCEPT: Brushguard, tow hitch, both welded to the frame. It's good to have friends and a fully equipped garage!
    Yeah, grounds are generally ignored when people do electrical work on vehicles. Thing is, ground points are just as important as any other contact point in a circuit. they must e kept just as clean, and corrosion free as any other connection in the circuit.

    Good luck!
    Pat☺
     

Products Discussed in

To Top