1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

p code coolant in engine

Discussion in 'General 4Runner Talk' started by huskerfan2021, Aug 31, 2021.

  1. Aug 31, 2021 at 11:26 AM
    #1
    huskerfan2021

    huskerfan2021 [OP] New Member

    Joined:
    Aug 31, 2021
    Member:
    #23111
    Messages:
    1
    Gender:
    Male
    First Name:
    Dave
    Vehicle:
    2005 6 SR5
    I own 2005 SR5 that check engine light came on. Shop tested it and came back with a P code that said coolant getting into engine. This car has only 148K and has never overheated. I am being told it could be blown head gasket or a cracked block. I just don't believe it could be either of those. Does anyone have an idea of what else it could be. Blue book is about 5500.00 and a replacement of the head gasket is about half of that.
     
  2. Aug 31, 2021 at 12:24 PM
    #2
    Coupe

    Coupe New Member

    Joined:
    Apr 8, 2017
    Member:
    #3855
    Messages:
    591
    Gender:
    Male
    First Name:
    James
    Houston, Texas
    Vehicle:
    2008 Toyota X-Runner
    TRD Blower, Coupe 7 1/2 qt oil pan, PC Stock wheels, SS drop, SS sways, QA1, TRD intake w/ custom Aluminum cover, T56 Magnum trans, Coupe shifter, Big tube long tubes, URD 3" cat back, All of NST pullies, MX upper/lower grille, BHLM, tinted tails, Gentex mirror, leather interior, APR X-1, APR 7th Injector, URD fuel pump upgrade, rear spoiler, AEM gauges, 4:10 rear gears, etc.
    Old school test of a bad head gasket was a soggy exhaust at the tail pipe. It would look like a cold start up in the winter. The exhaust out of the tail pipe would be foggy, but would not clean up once the engine got hot.

    The oil might also be milky colored.
     
    PhantomTweak likes this.
To Top