Need new springs

After installing the bumper and winch I lost a little over 3/4” of height. Since the 6112’s are literally brand new I’m looking at adding a heavier spring. What are your suggestions. I see a lot of folks running 650/700# kings / Eibachs.

here’s the run down on mods

southern style sliders about (40# each)
Warn bumper (80#)
Apex winch ( 60#)
Trd skid (25#)
Front runner ext length rack (85+#)
Dual battery (50+#)

so right now I’m about 380# over stock give or take.

Im heavily leaning towards the king 700’s. But any input is greatly appreciated.

 

I have similar to you but RCI full steel skids. Unless you have a full plate bumper King 650 springs is good enough which is what I have. It settled to 1/2" when I added the Victory 4x4 front lo pro steel bumper and 12k winch. I adjusted the collar to maintain my 2.5" of lift, not too much of a preload.

 

Ok that’s what I’m hoping for. Thank you.

 

Ordered the new springs from summit should be here Thursday and will get them put in this weekend