1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Need an obscure part #

Discussion in '5th Gen 4Runners (2010-2024)' started by Jameson41, Mar 26, 2021.

  1. Mar 26, 2021 at 9:30 PM
    #1
    Jameson41

    Jameson41 [OP] New Member

    Joined:
    Mar 5, 2020
    Member:
    #13420
    Messages:
    17
    Gender:
    Male
    First Name:
    Mike
    Vehicle:
    2020 TRD Pro Premium
    Bone stock
    I’ll spare you all the full story...but I swapped out my TRDORP roof rack for a TRD Pro. 2020 Model. Had a bear of a time getting the bolts loose. Actually had to resort to a heat gun. Total sh*t show.

    Has a huge rain and it leaked. I pulled it off. While doing so, I lost one of these silver clips picture below...the clip attached underneath the headliner, on the underside of the roof itself. It serves to hold the other two clips together.
    I cannot for the life of me find a part number...I’ll call the dealership parts dept tomorrow but I doubt they’ll be of an help...any parts gurus on here? Picture is below.

    BD7AAAC4-BA74-431B-8218-9A1D92E03D56.jpg
     
  2. Mar 26, 2021 at 10:28 PM
    #2
    Moon Landing

    Moon Landing AFFTC 1967/68 Eddies Air Patch

    Joined:
    Feb 4, 2021
    Member:
    #19563
    Messages:
    2,170
    Gender:
    Male
    First Name:
    Jer
    La Quinta, Ca. AKA "The Skillet"
    Vehicle:
    Moon Rock 4Runner
    Nam 68/69
    I tip my hat to you for figuring out a heat gun was needed. There's another trick should you run into the problem again. Depending upon the size of the bolt? A soldering iron works too. Did a major mod on a motorcycle and had to procure an industrial grade iron, because of the bolt size being worked with. Those, don't come cheap. lol Anyway, hope you don't have to purchase a 100 clips to get one. Good luck and keep us posted.
     
  3. Mar 26, 2021 at 10:50 PM
    #3
    4runningMan

    4runningMan New Member

    Joined:
    Sep 23, 2018
    Member:
    #7255
    Messages:
    2,704
    New Mexico
    I think there’s a “parts kit” that has the part you’re looking for. There are a couple threads floating around here about losing bits between the roof and headliner when doing this rack swap- along with procedures to help you not lose the parts. I know it’s too late in your case, but you might find some helpful info in those threads.
     
  4. Mar 26, 2021 at 11:40 PM
    #4
    Jameson41

    Jameson41 [OP] New Member

    Joined:
    Mar 5, 2020
    Member:
    #13420
    Messages:
    17
    Gender:
    Male
    First Name:
    Mike
    Vehicle:
    2020 TRD Pro Premium
    Bone stock
    Eureka!

    427A6735-997A-41C2-BEDE-80351EF64D18.jpg
     
    Moon Landing likes this.
  5. Mar 27, 2021 at 10:12 AM
    #5
    4runnerTRDoffroad

    4runnerTRDoffroad New Member

    Joined:
    Dec 22, 2020
    Member:
    #18676
    Messages:
    106
    Gender:
    Male
    California
    Vehicle:
    2020 White TRD ORP
    Trd Pro wheels with Falken Wildpeak AT3 tires. Ceramic window tint. LED lights. Frontrunner 3/4 roof rack. Alpharex Luxx Headlights. Morimoto XB amber fog lights. Bilstein 5100 shocks front set at 1.75 and rear with a 1" cornfed spacer.
  6. Mar 27, 2021 at 10:16 AM
    #6
    4runnerTRDoffroad

    4runnerTRDoffroad New Member

    Joined:
    Dec 22, 2020
    Member:
    #18676
    Messages:
    106
    Gender:
    Male
    California
    Vehicle:
    2020 White TRD ORP
    Trd Pro wheels with Falken Wildpeak AT3 tires. Ceramic window tint. LED lights. Frontrunner 3/4 roof rack. Alpharex Luxx Headlights. Morimoto XB amber fog lights. Bilstein 5100 shocks front set at 1.75 and rear with a 1" cornfed spacer.

Products Discussed in

To Top