1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Mystery Connector

Discussion in '2nd Gen 4Runners (1990-1995)' started by Bu11et_Sp0ng3, Sep 16, 2024.

  1. Sep 16, 2024 at 11:58 AM
    #1
    Bu11et_Sp0ng3

    Bu11et_Sp0ng3 [OP] New Member

    Joined:
    Sep 16, 2024
    Member:
    #42854
    Messages:
    6
    Vehicle:
    1990 4runner
    Long story short, I recently purchased a 90 V6 SR5 4runner from a friend.
    As I was working on it to get it road worthy again, I noticed some disconnected wires down by the front license plate. The FSM seems to not have any mention of the connector or what it once went to. White/Red and Black seems to be an odd combination, and the wires are large 12AWG or so.

    Given the location, I would expect it to be a lightbar, but it uses a Toyota style connector and is integrated to the factory harness.


    Does anybody have a clue what it's used for?
     
  2. Sep 16, 2024 at 12:56 PM
    #2
    hvac guy

    hvac guy New Member

    Joined:
    Apr 11, 2022
    Member:
    #26538
    Messages:
    231
    Gender:
    Male
    Hi pressure switch wires for the a/c? Kinda hard to tell from the pic
     
  3. Sep 21, 2024 at 11:13 AM
    #3
    Bu11et_Sp0ng3

    Bu11et_Sp0ng3 [OP] New Member

    Joined:
    Sep 16, 2024
    Member:
    #42854
    Messages:
    6
    Vehicle:
    1990 4runner
    Surely this is a better picture. The red is the mystery connector and the blue should be the A/C high pressure. Unless I'm somehow mistaken...

    20240921_100817.jpg
     

Products Discussed in

To Top