1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

LIght Bar Install Help Needed

Discussion in 'Lighting' started by Dougy, Aug 30, 2018.

  1. Aug 30, 2018 at 6:51 AM
    #1
    Dougy

    Dougy [OP] New Member

    Joined:
    Jul 25, 2017
    Member:
    #4453
    Messages:
    35
    Gender:
    Male
    First Name:
    Douglas
    Vehicle:
    2002 Silver Toyota 4Runner SR5
    Morning all. I will soon be buying a 42-inch Auxbeam light bar (posted below) that I will be mounting to the roof of my 02 4Runner. I have a write-up on pulling the headliner in order to tighten bolts on the other side. If I have to do this I am putting a rubber washer on the bolt and also some sort of material to seal the hole.

    The main question- do I absolutely need to pull the headliner, or is there some sort of self-tapping hardware I can use? I want to do this right and get it right the first time.

    Cheers boys.

    https://www.amazon.com/gp/product/B00ZEYQAS8/ref=ox_sc_act_title_2?smid=AFLE0NKKTARYW&psc=1
     

Products Discussed in

To Top