1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

If you could do it all over...

Discussion in '5th Gen 4Runners (2010-2024)' started by Scishfottman, Apr 23, 2023.

  1. Apr 23, 2023 at 2:13 PM
    #1
    Scishfottman

    Scishfottman [OP] New Member

    Joined:
    Apr 23, 2023
    Member:
    #32524
    Messages:
    4
    Gender:
    Male
    Thanks for letting me join the community folks.

    I'm in the process of shopping for my first 4Runner and would love your thoughts.

    Back in 2019, I picked up a new Jeep Wrangler Rubicon. Rationale was that it'd hold its value best. When I ordered, I ticked every box available but one. Two years later, I sold it during lockdown and made a nice little profit before going without a vehicle for a bit. In the interim, I've been driving a too small, but fun BMW.

    At one point, I realized that I missed out on some fun by going "bought, not built " with the Jeep.

    I'm wondering what your thoughts are as current owners? Would you do it the same again, or change?
     
  2. Apr 23, 2023 at 2:28 PM
    #2
    Matt83

    Matt83 New Member

    Joined:
    Jul 11, 2019
    Member:
    #10511
    Messages:
    780
    Northeast
    Really not many options available from Toyota on these vehicles compared to Jeep. If you want a built truck, you need to do it yourself.
     
    LCJ77 and Scishfottman[OP] like this.
  3. Apr 23, 2023 at 2:34 PM
    #3
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,490
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Welcome sir!

    Nice to hear you made a profit on your Jeep.
    As a first time Toyota, and Runner owner brand new in 2016, I wouldn't change anything on how it played out. Funny though it took me 5 years - 2021 til I was ready to throw down 10k n start building. 2016 was last year before TRD came to Canada I believe, so I bought Trail Edition. As opposed to a new fully loaded trd pro or something, I can vouch for the pros that come with maybe buying a good shape used T4R.
     
    Scishfottman[OP] likes this.
  4. Apr 23, 2023 at 2:53 PM
    #4
    Scishfottman

    Scishfottman [OP] New Member

    Joined:
    Apr 23, 2023
    Member:
    #32524
    Messages:
    4
    Gender:
    Male
    Thanks for the input so far.

    As I read through build threads, it's really looking like Off Road Premium vs. Pro. I like the 40th ann'y myself as well.

    The wheels and emblems on the 40th Anniversary model look great, but my wife isn't a fan of that striping, and it's not something I want to hear comments about for years to come.

    Some of the Premium builds I'm seeing are amazing.
     
    Thatbassguy likes this.
  5. Apr 23, 2023 at 2:56 PM
    #5
    2Toys

    2Toys Imperial Star Cruiser

    Joined:
    Jul 6, 2020
    Member:
    #15337
    Messages:
    1,672
    Gender:
    Male
    First Name:
    Gordon
    NorCal
    Vehicle:
    2019 4Runner TRDORP
    If you are even slightly leaning towards a PRO, make sure you test drive it with your wife in the truck, and make sure you get on the freeway and drive it at the speeds you normally would. I'm saying this because the PRO has an exhaust noise that a lot of people hate the sound of. It would be costly to swap the exhaust system with a non PRO. Trying to save you some money here so we can help you spend it on other things for your truck! :D
     
  6. Apr 23, 2023 at 3:04 PM
    #6
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,490
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Haha, smart married man. 2Toys brings up a great point.
    Also breaks down to I believe ORP has KDSS, beefed up front sway bars, better handling, arguably better articulation, 1/2" wider wheels I think.
    PRO is pretty pro though. Best sound system, exhaust, suspension, I believe 1" lift, trd intake, badging.
     
    Newfy and Scishfottman[OP] like this.
  7. Apr 23, 2023 at 3:06 PM
    #7
    Scishfottman

    Scishfottman [OP] New Member

    Joined:
    Apr 23, 2023
    Member:
    #32524
    Messages:
    4
    Gender:
    Male
    Precisely why I asked the question. No trim level is perfect. Swapping exhaust is the first reason I've seen not to go Pro aside from getting to choose wheel and suspension upgrades.
     
  8. Apr 23, 2023 at 4:50 PM
    #8
    2Toys

    2Toys Imperial Star Cruiser

    Joined:
    Jul 6, 2020
    Member:
    #15337
    Messages:
    1,672
    Gender:
    Male
    First Name:
    Gordon
    NorCal
    Vehicle:
    2019 4Runner TRDORP
    Married? Who me? Nah, but I do have a little experience!
     
    Scishfottman[OP] likes this.
  9. Apr 23, 2023 at 4:57 PM
    #9
    Mtbpsych

    Mtbpsych New Member

    Joined:
    Dec 3, 2018
    Member:
    #7922
    Messages:
    1,886
    Gender:
    Male
    Vehicle:
    2018 SR5
    I would go with a different color.
     
    Scishfottman[OP] likes this.
  10. Apr 23, 2023 at 4:59 PM
    #10
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,645
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    If you really want to do a serious build, I'd start with an SR5, or an OR. If your plans include regearing, and/or adding a front locker, I'd go with the SR5.

    The manual transfer case is nice, but you still rely on actuators in the front differential so I don't really consider it a significant upgrade. The locker on the off-road is nice, but I think the aftermarket ones have advantages. And, MTS and crawl control are neat, but I would trade both for a front locker.

    If I were back to square one knowing what I know now, I would probably still buy an off-road, but I would not get KDSS. It's a very cool feature for a weekend warrior in some specific situations, but eventually it becomes a limitation.
     
  11. Apr 23, 2023 at 5:25 PM
    #11
    Captain Spalding

    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    2,047
    There are so many good options available for the 4Runner in terms of suspension, wheels, and tires - if you get a Pro you’ve let Toyota make those choices for you. As for the KDSS: the ORP is available with and without it. It is of great benefit on the street. But can be limiting if you want to lift more than 3 inches, many have said.

    To answer the original question - if I could do it all over - I’d think really hard about getting a Limited for the full time 4WD and other goodies and then swapping out the bodywork, wheels, tires and suspension. Like this.
     
  12. Apr 23, 2023 at 5:25 PM
    #12
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,490
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    2Toys likes this.
  13. Apr 23, 2023 at 5:26 PM
    #13
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,490
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Get married and have babies bro
     
  14. Apr 23, 2023 at 5:47 PM
    #14
    2Toys

    2Toys Imperial Star Cruiser

    Joined:
    Jul 6, 2020
    Member:
    #15337
    Messages:
    1,672
    Gender:
    Male
    First Name:
    Gordon
    NorCal
    Vehicle:
    2019 4Runner TRDORP
    If you meant this for me: I WAS married a long time ago. I have three - oldest son, middle daughter, youngest son, and they are the best any father could want. I now have seven grandchildren and that is heaven on earth.
     
  15. Apr 23, 2023 at 6:14 PM
    #15
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,490
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Wow!!
     
    Scishfottman[OP] and 2Toys like this.
  16. Apr 23, 2023 at 6:48 PM
    #16
    4Runner75

    4Runner75 New Member

    Joined:
    Jan 25, 2023
    Member:
    #30869
    Messages:
    45
    Gender:
    Male
    Vehicle:
    2023 4Runner Limited Full Time 4wd
    In my case I went straight to Limited, it has all the goodies I wanted, 7 seats, the comfort is great. In my country the Limited comes with 18 inch wheels, it helps a lot with long trips (USA Limited comes with 20 inch). I can do light offroad but bought it to drive it in the city. I have no plans to modify it. Would buy this same model again if I had the need today.
    For what I read your needs are very different than mine so I recommend to study each trim.
    I suggest you watch this video, you can forward to where the Master Tech recommends a trim. Let us know wich way you went, good luck.

    https://youtu.be/ZDGAe8DOmck
     
    Harringbr99 and Scishfottman[OP] like this.
  17. Apr 23, 2023 at 7:17 PM
    #17
    JETSPD1477

    JETSPD1477 New

    Joined:
    Nov 30, 2022
    Member:
    #29859
    Messages:
    364
    SoCal
    Vehicle:
    Typical 4Runner
    couple things.

    toyota not releasing voodoo blue for lower trim levels after 2019.

    i think pros were in the low 50k range at the time i decided to buy. i had a couple of chances to buy a VB Pro but couldn’t get past the premium price for just color.
     
    Scishfottman[OP] and Thatbassguy like this.
  18. Apr 24, 2023 at 6:27 AM
    #18
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    6,632
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    If I did it over again, I'd get an SR5. I'll never use all the 4WD gadgets. I considered trading, but new SR5s around me now are $3-5k more than I paid for my OR new, which is stupid.

    If I knew of someone with a similar year/mileage SR5 that wishes they'd gotten an OR, I'd consider swapping. Not very likely, though, as my 2019 OR is just over 12k on the odo.
     
  19. Apr 24, 2023 at 6:31 AM
    #19
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    6,632
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
  20. Apr 24, 2023 at 6:38 AM
    #20
    Trail Runnah

    Trail Runnah New Member

    Joined:
    May 8, 2020
    Member:
    #14189
    Messages:
    2,947
    Gender:
    Male
    Vehicle:
    2013 T4R Trail Edition
    Stock
    There's a lot of room to "build" even on a Rubicon. A Wrangler is probably the most buildable vehicle out there.

    I bought my 4R in 2019. Hindsight 20/20, I should have bought a house, damn neary ANY house, and held onto it till early 2022. Would have been a much better use of $$ than a vehicle payment.
     
  21. Apr 24, 2023 at 6:40 AM
    #21
    MartianArmada

    MartianArmada New Member

    Joined:
    Dec 19, 2022
    Member:
    #30147
    Messages:
    106
    Gender:
    Male
    First Name:
    Alex
    Harford County, MD
    Vehicle:
    2021 Venture
    Wildpeaks
    I don't have any real "mods" done to my '21 Venture but I don't think I would've done it differently if I had the chance. I checked out an SR5 and the Venture at the dealership and I loved all of the off-road goodies that the Venture (based on ORP) had. Every other car in my past has been pretty cheap and basic so I was kind of excited to be in a place in my life where I could get something nice.
     
    Ironguy likes this.
  22. Apr 24, 2023 at 7:07 AM
    #22
    YetiMtnBkr

    YetiMtnBkr New Member

    Joined:
    Jan 3, 2021
    Member:
    #18893
    Messages:
    945
    Gender:
    Male
    First Name:
    Jim
    Frederick, MD
    Vehicle:
    2021 LR Pro
    None
    For sure! A roof over your head is more important than any frivolous vehicle. Especially the way housing has appreciated of late!
     
  23. Apr 24, 2023 at 7:10 AM
    #23
    MartianArmada

    MartianArmada New Member

    Joined:
    Dec 19, 2022
    Member:
    #30147
    Messages:
    106
    Gender:
    Male
    First Name:
    Alex
    Harford County, MD
    Vehicle:
    2021 Venture
    Wildpeaks
    For sure, I see college friends of mine with multiple cars each, all modified and cool, and sometimes get envious. Then I remember I own my house and they live with their parents so I feel a little better about myself.
     
  24. Apr 24, 2023 at 7:17 AM
    #24
    YetiMtnBkr

    YetiMtnBkr New Member

    Joined:
    Jan 3, 2021
    Member:
    #18893
    Messages:
    945
    Gender:
    Male
    First Name:
    Jim
    Frederick, MD
    Vehicle:
    2021 LR Pro
    None
    That beautiful vehicle can be taken away in a instant (accident), but you can always go home to YOUR house! Vehicles usually depreciate / houses usually appreciate!
     
  25. Apr 24, 2023 at 7:25 AM
    #25
    Curlystooge

    Curlystooge Member

    Joined:
    Feb 10, 2022
    Member:
    #25595
    Messages:
    202
    Gender:
    Male
    Vehicle:
    2022 limited in magnetic grey
    For the past 40+ years I have always spent too much on fun cars. When my wife would complain I would say; in a pinch you can live in your car but you can never drive your house.

    Don’t ask how that went over.
     
  26. Apr 24, 2023 at 7:49 AM
    #26
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,218
    Gender:
    Male
    I absolutely love to take my buddy's Wrangler Rubicon with Xtrem Package (35in tires and some other stuff right from the factory). But I don't have that confidence of reliability on them. One time faced the sway bar disconnect not working. If I were to have a non daily driven trail rig I would definitely have a Jeep with or without factory sway bar disconnect as its no big deal to get a manual option for both.

    I did love the driving feel of BMW X5. Always enough power when needed and gave me about 24mpg on my daily drive to work. I have confidence on it as a city car but never feel comfortable taking even on forest roads.

    Needless to say my love for 4Runner, not only for weekend trail runs & long trips I got a 4Runner for city driving only as well.
     
    Harringbr99 and Scishfottman[OP] like this.
  27. Apr 24, 2023 at 8:39 AM
    #27
    Ironguy

    Ironguy New Member

    Joined:
    Dec 22, 2019
    Member:
    #12421
    Messages:
    7,222
    Gender:
    Male
    First Name:
    Ralph
    Bisbee AZ
    Vehicle:
    2020 Black 4Runner Venture 1967 FJ40 Land Cruiser
    New pine scent hanger, new sun shade
    Welcome!
    Reality vs. Fantasy when it comes to the actual use of your vehicle. Daily driver, weekend warrior, lots of offroading? It's all a compromise. Happy Shopping!
     
  28. Apr 24, 2023 at 9:52 AM
    #28
    Trail Runnah

    Trail Runnah New Member

    Joined:
    May 8, 2020
    Member:
    #14189
    Messages:
    2,947
    Gender:
    Male
    Vehicle:
    2013 T4R Trail Edition
    Stock
    Who could have predicted 2020. Completely priced out of the market in my area now.

    The 4R was 6yo at the time and priced in the low 20s. I thought it was a somewhat responsible purchase at the time.

    Shortly before buying the 4R I looked at a house on a whim. Did not care for the busy street it was on, it did not have a garage, and it would have been a lousy and even longer commute to work. Was otherwise a cute, move in ready small house. Was 185K in Jan 2019. Now you can't touch anything that doesn't need a total reno for under 300k. F*ck me, right?
     
  29. Apr 24, 2023 at 10:26 AM
    #29
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,493
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Well, I think that’s kind of legit! even if it’s in a weird way lol.

    Some people have more of a wandering mindset. Or view everything in life as temporary and always have a bag packed and ready to go.

    And if there ever was the perfect vehicle for wandering, the 4runner has to be pretty close to being it!
     
    Scishfottman[OP] likes this.
  30. Apr 24, 2023 at 11:13 AM
    #30
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,493
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s

    Even though I never imagined doing as much trail and off roading as I’m doing now, I think the basic Off Road trim package I picked is the sweet spot for me. What I like most is the the factory rear locker. Because it’s an OE solution that’s had the kinks worked out by the factory, and it means I don't have to do the work of researching a locker install (I’m an over-thinker, it takes me twice as long to decide or do anything).

    I’ve never been that impressed by the electronic gizmos the Off Road comes with, so I don’t think it’s a reason to seek out this trim. I’d rather have a place for a garage door opener/sunglasses. For electronic aids, A-track is good enough when paired with the rear locker.

    I really like the idea @Captain Spalding mentioned…it would be epic to have a 4runner with full-time 4wd, set up for proper trail/travel/camping duty. That might be worth doing the work of installing a locker yourself. Although to be completely honest, I would really miss the 4wd shifter lever on the off-road.

    Knowing the pin stripes and dents I’ve gotten makes me feel like getting a new one was a bit of a waste. Finding a nice insurance salvage 4runner…something newish with hailstorm damage, might be the perfect 4runner for me. Although I could imagine prices that
    wouldn’t make having a salvage title worth it.
     

Products Discussed in

To Top