1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

I need some advice on my 3rd Gen

Discussion in '3rd Gen 4Runners (1996-2002)' started by pb888, Jul 16, 2020.

  1. Jul 16, 2020 at 7:39 PM
    #1
    pb888

    pb888 [OP] New Member

    Joined:
    Jul 16, 2020
    Member:
    #15552
    Messages:
    1
    Gender:
    Male
    Vehicle:
    97 Toyota 4Runner 4WD
    0380A16C-5DFC-4EBF-B7BD-DDE42ED2468C.jpg 076BD04A-E93E-4633-BF55-40F3A8885033.jpg Hey new member here haha. I bought this 97 4runner just about a month ago. Now engine is idling really rough at low speeds and is very jumpy. This went away at higher speeds. Also, I noticed when I turn off the car after driving, there would be bubbling in the coolant reservoir. So I knew something was wrong. Then, started loosing coolant and got the check engine light on for a cylinder 5 misfire. White smoke started coming out of my tailpipe. I assumed it’s a head gasket. So I took apart the whole engine by myself and some neighborly help(I’m 18). Got done to the heads and gaskets. They don’t look too bad. My whole reason for this post is, the piston that was misfiring looks brand new, likes it’s never been used. Is that just because the coolant steam cleaned it?0380A16C-5DFC-4EBF-B7BD-DDE42ED2468C.jpg

    45BC11D0-CB8E-4F1B-A4C2-80E942250833.jpg
    CA282A72-D76F-4CE0-AA09-E2CDDF66FFC8.jpg
     
  2. Jul 16, 2020 at 8:53 PM
    #2
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,850
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    Welcome.
     

Products Discussed in

To Top