How to connect the Vantrue dash cam kit to a 2024 4Runner.

Greetings. I bought a Vantrue dash cam with the Hardwire kit to leave it connected 24/7. How to connect the Vantrue dash cam kit to a 2024 4Runner. I am looking at the fuse panel layout but I cannot identify which one is for the 4Runner's internal lights and where in the box to connect the direct cable to the battery. Thanks for your help.

Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Add a Circuit Fuses, Low Voltage Protection for N4, N4 Pro, N5,N2 Pro(2023),E1,E1 Lite,E2,E3,S1 Pro,S2-2CH, S2-3CH, N2S, N1 Pro(2023)

https://www.amazon.com/dp/B083XB8T7T

 

There is a way to tap into the rear view mirror using a DIY harness. Perhaps someone more knowledgeable can chime in. Good luck.

 

You don't have to hard wire it, if you don't want to. Use this adapter: https://trailgridpro.com/products/d...W8twKTyoJlwzRv8dgPc-yV2vXI1uY6IaAiX2EALw_wcB/

...and tap directly into your rear view mirror. That is, if you have the HomeLink style rear view mirror. I know base model's don't have it. Yours probably does.