1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Hose placement question

Discussion in '3rd Gen 4Runners (1996-2002)' started by thatmotoguy, Feb 3, 2023.

  1. Feb 3, 2023 at 12:26 PM
    #1
    thatmotoguy

    thatmotoguy [OP] New Member

    Joined:
    Feb 3, 2023
    Member:
    #31046
    Messages:
    2
    Gender:
    Male
    First Name:
    Kevin
    Vehicle:
    2002 2WD 6Cyl 4runner
    Hey guys,

    First post here, I've been a shade tree mechanic for about 10-15 years now and have done many hard jobs but I've been excited because I inherited this 3rd gen 4runner, 2002 6cyl and it was leaking oil horribly. The valve covers were basically under .5-1mm of old oil. Went to tackle the job with too much confidence and didn't label and take everything as slowly as I should have but I was hoping this forum could help.

    I have the lower and upper plenum back on and most hoses to this point in the job connected back to where they should be but this hose has been blowing my mind. I must have knocked it off or missed it in my DIY because I can not find where it goes. Does anyone have any ideas?

    Wanted to find out before I put the throttle body back on in case other parts need to come back off.

    I greatly appreciate your guys expertise, hoping someone can help.

    EDIT: Also excited to join the forums, I hope I can help someone out in the future with a situation

    attaching images...

    IMG-2666.jpg
    IMG-2667.jpg
     
  2. Feb 4, 2023 at 5:29 AM
    #2
    JET4

    JET4 Old Member

    Joined:
    Dec 20, 2018
    Member:
    #8147
    Messages:
    4,209
    Gender:
    Male
    Southeast, Va.
    No idea on the hose ,but Welcome
     
  3. Feb 4, 2023 at 10:25 AM
    #3
    2018 Limited

    2018 Limited New Member

    Joined:
    May 15, 2022
    Member:
    #27075
    Messages:
    519
    Gender:
    Male
    First Name:
    BDR
    Vehicle:
    2018 Limited
    Welcome. You can try pulling up a graphic on an oem Toyota parts page online. Try looking in the cooling or AC section and attempt to match up that pipe on the parts fiche. I took a quick look myself and found a part similar in shape but you would probably do better to confirm its identity with part in hand. Maybe worth a look.
     
  4. Feb 5, 2023 at 7:27 AM
    #4
    Ahdofu

    Ahdofu New Member

    Joined:
    Dec 14, 2020
    Member:
    #18506
    Messages:
    310
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    1997 4Runner SR5, V6, Auto, 4WD
    I don't gave access to my car so this is just based on my memory
    I think this is your PCV hose. The 90 degree metal end of the tube goes to the driver side valve cover. I think on top of the valve cover there is a hole toward the firewall where this end goes. The other end must go somewhere on the intake side.
     
  5. Feb 5, 2023 at 11:40 AM
    #5
    thatmotoguy

    thatmotoguy [OP] New Member

    Joined:
    Feb 3, 2023
    Member:
    #31046
    Messages:
    2
    Gender:
    Male
    First Name:
    Kevin
    Vehicle:
    2002 2WD 6Cyl 4runner
    Thank you guys for the welcome and responses, still haven't concretely narrowed it down but I'm waiting on replacement hoses to the intake from McGeorge. Expensive for some hoses but I expect the car to last a long time if properly taken care of
     
  6. Feb 5, 2023 at 1:32 PM
    #6
    Steely123

    Steely123 What's the new trend? I'll do it!

    Joined:
    Jun 4, 2022
    Member:
    #27323
    Messages:
    3,373
    Gender:
    Male
    TX
    Vehicle:
    2018 4runner SR5 premium
    Welcome
     
  7. Feb 5, 2023 at 4:03 PM
    #7
    Ironguy

    Ironguy New Member

    Joined:
    Dec 22, 2019
    Member:
    #12421
    Messages:
    7,205
    Gender:
    Male
    First Name:
    Ralph
    Bisbee AZ
    Vehicle:
    2020 Black 4Runner Venture 1967 FJ40 Land Cruiser
    New pine scent hanger, new sun shade
    Welcome from Arizona!
     
  8. Feb 6, 2023 at 9:11 AM
    #8
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    2,095
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    I think it goes on the back of the intake near the firewall.

    See some pics here of my 2002:
     

Products Discussed in

To Top