1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

HD springs

Discussion in '2nd Gen 4Runners (1990-1995)' started by 2ndgenrunner, Sep 9, 2021.

  1. Sep 9, 2021 at 6:49 PM
    #1
    2ndgenrunner

    2ndgenrunner [OP] New Member

    Joined:
    Sep 9, 2021
    Member:
    #23274
    Messages:
    1
    Gender:
    Male
    Hey guys and gals. I'm wondering if anyone has found a suitable set of rear springs for hauling a little heavier loads? I need about a 2" lift from them aswell.
     
  2. Sep 23, 2021 at 2:43 PM
    #2
    atgparker

    atgparker Cal Poly, ETME 1988

    Joined:
    Jun 20, 2018
    Member:
    #6296
    Messages:
    335
    Gender:
    Male
    First Name:
    Andrew
    Mission Viejo, CA
    Vehicle:
    1991 White 4Runner 3.0 L
    Rebuilt Engine MLS and ARP on the heads, DT Header, 2-1/2" CARB compliant Flow-Master CAT with 2.0" Bosal CAT back Dayco 1-1/4" Spacers, SkyJacker M-Series Monotube Shocks, Ball Joint Spacers. 95-9006 K&N Air Cleaner, G-Plus Alum Radiator, ZIrgo 16" Fan, Derale Temp switch/relay
    Eibach, will get you the lift and they are made in the USA in Corona, CA. Closed and ground at the top and silver painted.
    20210529_142003.jpg
    Here is the OEM from my 91 sitting on a Daystar spacer and the Eibach side by side for a free length comparison.
    20210522_151931.jpg
     

Products Discussed in

To Top