1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Fuel pump hanger and sending unit

Discussion in '1st Gen 4Runners (1984-1989)' started by cashmoney, Sep 17, 2023.

  1. Sep 17, 2023 at 11:30 AM
    #1
    cashmoney

    cashmoney [OP] New Member

    Joined:
    Sep 17, 2023
    Member:
    #35718
    Messages:
    3
    Gender:
    Male
    Vehicle:
    1989 4runner
    Mine is trashed and I need to buy new ones. Are there any replacement ones that aren’t $200? Any reason I have to use the three port one and couldn’t just use a 2 port? 1989 4Runner with the 22re.

    IMG_0830.jpg
    71657184015__3704B4D0-1BF2-41A8-B9B4-A07974C77F2E.jpg
     
  2. Sep 18, 2023 at 3:38 PM
    #2
    cashmoney

    cashmoney [OP] New Member

    Joined:
    Sep 17, 2023
    Member:
    #35718
    Messages:
    3
    Gender:
    Male
    Vehicle:
    1989 4runner
    Found a complete knock off pump hanger on Amazon for $50 with the 3 ports on it so hope that works. And decided to say screw it and get a universal sending unit because I'm just not going to drop $100+ on an OEM model when a universal is $20. These are not complicated pieces of machinery.
     
  3. Dec 10, 2023 at 6:43 PM
    #3
    johne5ive

    johne5ive New Member

    Joined:
    Dec 10, 2023
    Member:
    #37200
    Messages:
    2
    How did those parts work out? One of the lines coming off mine is kinked
     
    Bivouac09 likes this.
  4. Dec 11, 2023 at 4:51 AM
    #4
    cashmoney

    cashmoney [OP] New Member

    Joined:
    Sep 17, 2023
    Member:
    #35718
    Messages:
    3
    Gender:
    Male
    Vehicle:
    1989 4runner
    The pump and hanger dropped right in and connected up. No complaints. The sending unit I haven’t done anything with besides install it.
     
  5. Dec 13, 2023 at 7:30 AM
    #5
    johne5ive

    johne5ive New Member

    Joined:
    Dec 10, 2023
    Member:
    #37200
    Messages:
    2
    Nice, thank you.
     
  6. Apr 11, 2024 at 4:31 PM
    #6
    Zig

    Zig New Member

    Joined:
    Mar 5, 2024
    Member:
    #38968
    Messages:
    11
    Gender:
    Male
    First Name:
    Mike
    Normandy Park, Wa
    Vehicle:
    1994 4Runner 3.0L 4X4
    Can I ask a question about your pump install? I know I’m a few months late. Mine looked actually worse than yours and I am forced to completely replace everything. Tank, pump/filter, bracket assembly as well as fuel level sending unit. Ouch! Yah it did hurt. The last guy did a real number on what ever he put in the tank.
    Anyway my question is, I received my pump and then got my bracket. Nothing between the two suppliers as to a mounting pad for the pump. Some others show a piece of rubber that fits between the pump and the bracket. Can’t seem to find one that goes with this combo. Any thoughts? Was there something between yours or just zip tie them together and hope for the best?
     
  7. Aug 20, 2024 at 8:12 AM
    #7
    project85

    project85 New Member

    Joined:
    Dec 29, 2023
    Member:
    #37550
    Messages:
    9
    Gender:
    Male
    First Name:
    Juston
    Vehicle:
    1985 Toyota 4 Runner
    I pulled my entire fuel system last weekend. Had to order a new pump, screen, pump bracket, fuel tank and level sending unit.

    IMG_7875.jpg
    IMG_7941.jpg
    IMG_7942.jpg
    IMG_7875.jpg
     
To Top