1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Floating screens shaking - fixes?

Discussion in 'Audio & Video' started by Thacrow, Jul 4, 2024.

  1. Jul 4, 2024 at 1:44 PM
    #1
    Thacrow

    Thacrow [OP] New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,267
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    I just installed a 10 inch Kenwood floating screen and she sure does shake just driving down the street. This isn't going to work off roading my wife and I are already calling it.

    It also rattles against the metra dash unit. The plan there is to put felt tape or maybe thin foam tape around the head unit to get a tighter fit on the metra dash fascia, but I don't know.

    The other thing is the Metra dash kit included a bracket for the head unit which is made of plastic. Plastic. Plastic......so it's going to inherently be more bouncy than metal.

    Anyone here deal with this with any success?

    I'm probably going to go back to stock screen or some sort of in-dash screen is what we're already thinking.
     
  2. Jul 4, 2024 at 2:38 PM
    #2
    Lc200

    Lc200 New Member

    Joined:
    Jun 16, 2023
    Member:
    #33430
    Messages:
    755
    Gender:
    Male
    Vehicle:
    Pre Facelift SR5P
    As good as that Kenwood is, the 10 inch is a little too big for the space in the 4runner. It covers most of the vents and does not sit flush with the dash due to its enormous size.
    I have seen one in person installed and it did have a lot of give to it. But the car was stationary so I am not sure how much of a wobble it had while moving.
    The rattle can be taken care with the foam tape though. From what I understand, the owner added some foam pieces at the back in and around the metra adaptor so that the screen does not have a lot of space to move.
     
  3. Jul 5, 2024 at 7:01 AM
    #3
    Liv2Ride

    Liv2Ride New Member

    Joined:
    Apr 4, 2019
    Member:
    #9417
    Messages:
    51
    Vehicle:
    ’19 MGM Limited
    Eibach Stage 2, JBA UCA’s, K02 - 265/70, Ark guards, Sony XAV9500ES
    Does the HU use the same 4 10mm mounting bolts for the dash? If so, perhaps it’s the way the screen attaches to the HU. I have the Sony XAV-9500ES and there is NO screen movement, at all, that is detectable. There is no rattle either.
     
  4. Jul 5, 2024 at 7:54 AM
    #4
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    2,735
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    I used the OEM metal brackets for mounting my headunit so the Metra dash kit just supporting itself.
     
    Ripper238 likes this.
  5. Jul 5, 2024 at 11:56 AM
    #5
    Thacrow

    Thacrow [OP] New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,267
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    which HU do you have?
     
  6. Jul 5, 2024 at 11:57 AM
    #6
    Thacrow

    Thacrow [OP] New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,267
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    Yeah same 4 mounting bolts but the metra mount is plastic.

    The screen mounts with a very solid metal bracket and 6 screws. It's very solid.
     
  7. Jul 5, 2024 at 11:59 AM
    #7
    whippersnapper02

    whippersnapper02 New Member

    Joined:
    Feb 27, 2019
    Member:
    #8982
    Messages:
    2,735
    Gender:
    Male
    First Name:
    Christian
    Vehicle:
    2019 4Runner TRD Offroad Premium
    Pioneer DMH-WT7600NEX junk. I have a Sony XAV-AX8100 from Trailgrid Pro to install for when I'm not lazy and it cools down here.
     
    Last edited: Jul 5, 2024
  8. Jul 5, 2024 at 2:27 PM
    #8
    Ripper238

    Ripper238 New Member

    Joined:
    Jan 21, 2023
    Member:
    #30792
    Messages:
    852
    Gender:
    Male
    Vehicle:
    2019 TRD OR
    Not sure the dash kit they used but I had my local car audio shop reinforce it for my off roading. Super solid and has been good on all my off road adventures since 2020.

    Kenwood DMX as well.

    It should not shake, is it just the screen or the whole head unit? You should yell at the installer. lol
     
    Last edited: Jul 5, 2024

Products Discussed in

To Top