Fanless LEDs

I just installed these JDM fanless LEDs. I really don’t like the sound of an LED with a fan. So I figured I give these a try. Anyone have heating issues with fanless LEDs?

JDM ASTAR Fanless Design H16 Up to 60% More Downroad Visibility White LED Fog Light Bulbs

https://www.amazon.com/JDM-ASTAR-Version-Extremely-Headlight/dp/B07HHMW29M

 

How’s the light output and cutoff?

 

I’m not a light expert but I think it’s ok. It’s probably not the best either.

 

Seems pretty good, how will this tie into the DRL lighting?

 

I installed BEAMTECH 9005 and H11 on my 2019 PRO. Had to use a anti flicker resister decoder (plug n play) for the day time running lights. The lights are great and cost less than $75 for all the lights.

 

For the longest, I was concerned with this issue as well. I tested this out and had people tell me there was no blinding with my lights. If it was blinding I would have put back on the OEM bulbs.

 

I installed HIDs when I first bought me 4runner I adjusted the headlight beam to the lowest possible but I was still getting flashers. HIDs were just too bright. So I went with Morimotos LEDs, same thing I was also getting flashers.

These JDM fanless aren't as bright as the Morimotos. I haven't gotten any flashers. I even had my wife drive my 4Runner while I drove her car, I got in front of her looked on my rear view mirror it wasn't bright at all and drove on the opposite side of the road as part of the oncoming traffic not bright at all. These are perfect.

 

IMO and using simple "eyeball/seat of the pants feel" here, I like to see photos of all lights that are aimed at light colored wall.
And seeing a definite cut off line. If there is any stray light above that, it's in the mirrors of what you are following and oncoming traffic.

 

FWIW I am using these: https://www.amazon.com/gp/product/B07TWRFYPC/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1



I was concerned about possible fan noise, but i have not bann able to hear any. Light output is better than halogen with a good cutoff, not as bright as HID (that is to be expected). So far i have not been flashed - even after my lift.

 

I run HIDs with zero issues, adjusted them down and never get flashed. Great light output too.