1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Does ECU swap requires re[rograming for 1995 3VZE A/T 2X?

Discussion in '2nd Gen 4Runners (1990-1995)' started by Fermin4, Aug 16, 2020.

  1. Aug 16, 2020 at 6:55 PM
    #1
    Fermin4

    Fermin4 [OP] New Member

    Joined:
    Feb 1, 2020
    Member:
    #12978
    Messages:
    24
    Gender:
    Male
    First Name:
    Adams
    Vehicle:
    1995 2WD 4Runner 3VZ-E Engine OBD-1
    None
    I have one that refuses to run without missing horribly.
    New distributor, plugs, HV cables, igniter, coil, injectors.
    I starts sometimes (fuel Pump OK, pressure gauge hooked up permanently). I gets really rough from 1300 to 2000+ RPM.
    bought three ECU on eBay and do not work, while the original kind of starts and runs very rough
    Checked relays, COR and MFI and some grounds.

    Why the ECU's would not work? cannot be they are all bad can it?
    RPM indicator vibrates back and forth around those RPM but ok on very high RMP's or idling.
    Any suggestions?
     
    This site contains affiliate links for which the site may be compensated.
    #1

Products Discussed in

To Top