Do these alignment specs look ok?

Sorry I know there’s slot of threads but I’m pretty new to 4runners and I had to have a Chevy shop do my alignment. No Toyota here. I have the 1 inch spacer lift up front from cornfed. Sr5 premium with stock suspension. Except the lift. 1 offset wheels with stock size tires if it matters. Thanks everyone!!

 

Can't see nothing

 

I don't see any alignment specs. A pic of the spec sheet would help us help you.

 

Huh I think I posted two threads.

 

Should go down the road! Any more lift though and you might want a touch more 'caster', this helps with stability feeling at speed.

 

Caster is towards the lower end of spec. It's fine, but more is usually better.

The fact that camber, caster, and toe are identical on both sides makes me think it's a good shop. I would be happy with those specs.

 

Thank you very much. I thought the tire seemed to be tipped in a bit to the eye but I'm going off what you guys are saying seeing I bit ignorant to the runner. On the bright side I had a steering wheel shimmy like a lot of people do from 50 to 60. it's entirely gone. The shop figured I was out of spec even before I leveled it.

 

Had another alignment done today you can see previous shop versus this other shop definitely a difference still not 100% happy though with my tire choice but at this point I'm going to run them. Lift is Bilstein 5100 set to 1.75 Plus a spacer on the driver side and one inch eibach coils in the rear