1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Dash Cam continuous power source

Discussion in 'New Member Introductions' started by creoleactor, Apr 2, 2023.

  1. Apr 2, 2023 at 10:33 AM
    #1
    creoleactor

    creoleactor [OP] New Member

    Joined:
    Apr 2, 2023
    Member:
    #32132
    Messages:
    1
    Gender:
    Male
    First Name:
    Tony
    Vehicle:
    2023 4Runner
    I bought a dash cam and currently use the cigarette outlet to power it but want to monitor while parked so I bought the hardwire kit and need to connect to the fuse box. Is there one inside the vehicle? If so which outlet would be best?
     
  2. Apr 8, 2023 at 11:42 AM
    #2
    Dabigono

    Dabigono Just Joined

    Joined:
    Dec 24, 2018
    Member:
    #8196
    Messages:
    4,417
    Vehicle:
    2020 4Runner
    Search for “dongle”


    BTW, welcome
     
  3. Apr 8, 2023 at 12:02 PM
    #3
    Ironguy

    Ironguy Kind of New

    Joined:
    Dec 22, 2019
    Member:
    #12421
    Messages:
    7,288
    Gender:
    Male
    First Name:
    Ralph
    Bisbee AZ
    Vehicle:
    2020 Black 4Runner Venture 1967 FJ40 Land Cruiser
    New pine scent hanger, new sun shade
    Welcome from Arizona!
     
  4. Apr 8, 2023 at 3:30 PM
    #4
    Steely123

    Steely123 What's the new trend? I'll do it!

    Joined:
    Jun 4, 2022
    Member:
    #27323
    Messages:
    3,488
    Gender:
    Male
    TX
    Vehicle:
    2018 4runner SR5 premium
    Welcome
     
  5. Apr 8, 2023 at 5:45 PM
    #5
    Jynarik

    Jynarik I like boobies

    Joined:
    Jul 10, 2019
    Member:
    #10510
    Messages:
    2,325
    Gender:
    Male
    Austin Texas
    Vehicle:
    2019 trd pro voodoo
  6. Apr 8, 2023 at 6:01 PM
    #6
    PVT Pablo

    PVT Pablo

    Joined:
    Mar 10, 2016
    Member:
    #1694
    Messages:
    2,373
    First Name:
    Paul
    Kitsap County, WA
    Vehicle:
    2016 4Runner TRD Pro
    That's the same one I use, however that dongle isn't powered while the vehicle is off for parking, at least not on my '16.
     
    Jynarik[QUOTED] likes this.
  7. Apr 8, 2023 at 7:42 PM
    #7
    Jynarik

    Jynarik I like boobies

    Joined:
    Jul 10, 2019
    Member:
    #10510
    Messages:
    2,325
    Gender:
    Male
    Austin Texas
    Vehicle:
    2019 trd pro voodoo
    yeah, didn’t think it had power when off. My camera has a reserve battery so pops on
     
  8. Apr 9, 2023 at 8:08 AM
    #8
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,637
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Welcome! I don't have a dash cam but I run multiple sets of 12v offroad lights straight from the battery with inline fuses, relays, and switches. Allows the switch to light up when flicked on, and run lights with the truck off and keys out. Could prolly rig a dash cam that way, or maybe someone here is aware of constant power from the interior fuse box?

    In Canada I've used this wiring harness (and upgraded to OEM style dash switches), works excellent.

    https://www.princessauto.com/en/1-light-quick-connect-harness/product/PA0008816266
     

Products Discussed in

To Top