1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Catalytic Converter 2000 4Runner 4 Cylinder

Discussion in '3rd Gen 4Runners (1996-2002)' started by Alex20004runner, Aug 22, 2020.

  1. Aug 22, 2020 at 3:54 PM
    #1
    Alex20004runner

    Alex20004runner [OP] New Member

    Joined:
    Aug 22, 2020
    Member:
    #16254
    Messages:
    1
    Gender:
    Male
    First Name:
    Alex
    Vehicle:
    2000 Toyota 4Runner Base Model 4 Cylinder
    Hello, I am looking for a 2000 4Runner, Base Model, 4 Cylinder, Catalytic Converter, FRONT. (SHOWN IN DIAGRAM, part#17410)
    THE DIAGMRA OF EXHAUST.jpg
    I cannot find any Cat that is a direct with my manifold. Most of my searches consist of the single pipe, front Cat. Ofcourse there is the dealership that has this part, but I don't really plan on pulling out close to $1,200 out of my pocket.

    I seen multiple types, but my manifold only accepts this type of Cat. The others are either single tubed, or the neck isnt long enough to reach from the bottom of the car to the top.

    If you know where I could obtain this part for a cheaper-than-dealership price, that would be awesome!
     
  2. Aug 24, 2020 at 7:29 AM
    #2
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    2,094
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    Did you price it on-line? I use McGrorge Toyota. They drop 30% off the normal dealer price. That's still going to be a big chunk of change...

    Also, the part number isn't 17410...that's the diagram number. The full part number would be longer and include that.

    -Mike
     
  3. Aug 24, 2020 at 9:13 AM
    #3
    4scooter19

    4scooter19 New Member

    Joined:
    Feb 23, 2019
    Member:
    #8920
    Messages:
    1,338
    Gender:
    Male
    Oregon
    Vehicle:
    98 and 86 4Runners
    Why not buy a generic one close to the same length have a muffler shop cut the pipe off that mounts to the manifold and weld it to the new cat? Really all you need is the flange that mounts to the manifold. A good muffler shop should be able to make it work.
     

Products Discussed in

To Top