Can getting new wheels fix hub-centric issues?

I have been having issues with my 5th gen 4runner wheels not being hub-centric which is causing uneven tread wear on my tires. This has caused me to have to replace my tires much too often. I don't want to replace my lift kit or anything like that if possible. Can replacing the wheels on my 4runner fix this issue? If so what are some good wheel options? I am running Toyo Open Country 32s.

 

I've looked into getting new spacers and/or a lift kit and specifically liked Spider Trax spacers and Bilstein 5100 lift system. If I were to swap my lift kit and/or spacers, would you recommend I swap my whole suspension system? If so, any suggestions? I would only swap my suspension if I really needed to as I am on somewhat of a budget.

 

4runners have lug centric wheels from the factory. Why would you want a hub centric wheel? I would think trying to use hub centric wheels would cause more of an issue. What wheels do have now?

bad tire wear is usually due to misaligned front end and/or tire imbalance issues.

 

Unfortunately, I bought the 4runner used and it came with aftermarket wheels.

 

if theyre lug centric wheels you should be good

 

Get an alignment first.

 

Check checked with the shop my specific car is hub centric

 

Your car or rims?

I've always thought the 4R was hub centric.

 

I did get an alignment that’s where they found the issues

 

Honestly I think both were huh centric but for some reason I’m still having issues

 

What's the center bore size on your wheels? 108mm? 110mm? You can get hubcentric rings which will center the wheel on your hub and eliminate vibes. For example:

For 108mm wheel bore:

$15 Wheel Accessories Parts Set of 4 Hub Centric Ring 108mm OD to 106.10mm Hub ID, Polycarbonate (Wheel Hub Ring, 4 Pack, 108 mm OD to 106.10 mm ID Wheel Centerbore, Polycarbonate)

https://www.amazon.com/dp/B09SKJ6PZX/
For 110mm wheel bore:

$20 Circuit Performance Hub Centric Rings (4 Pack) - 110 to 106.1 Black Nylon Hubrings - Compatible with 4Runner, Tacoma, GX460, GX470, Tunda Sequoia with 106.1mm Vehicle Hub Using Wheels with 110mm CB

https://www.amazon.com/Circuit-Performance-Centric-Rings-Pack/dp/B09NQL987Z/

 

I'm not sure what the bore size is at the moment so I will look into that, thanks for your suggestions!